rec.autos.simulators

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

TRUSRS

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by TRUSRS » Tue, 26 Jan 1999 04:00:00

HELP!!!
I just installed the Thriller 3D 8mb PCI card and ARGH!!!
I'm running a P-133 (overclocked to 180), 80mb ram, 3 hardrives, win 98

after installing the card, my cpu freezes, dos mode will not work, my videos
have no picture, only sounds, and other stuff. I bought the card so I could use
ICR2 in rendition mode. And I can't do this yet. Please hlpe me. I called the
Hercules tech support at 11:00 a.m.  and it is now 5:00 p.m. and they haven't
called back. Please help me. thanx.

John Moor

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by John Moor » Tue, 26 Jan 1999 04:00:00

You need an icr2 patch to run it with rendition. Its available at several sites
this is the best   http://www.simracing.com/simproject/  it's the v2200 patch
JM - have fun, icr2 rips with that card!!

> >First thing you do,   go here:  http://www.hercules.com/support/thriller/

> >If you haven't already done so, download and install the latest BIOS and
> >drivers for your model card, they can be found at the address I just gave
> >you.  The original BIOS and drivers that come with the card just plain suck.

> >Also, read the FAQ at that address, it has some very good tips.

> >Hope this helps,
> >Jim
> >JimWagon on TEN

> The installation CD that came with board has all of the latest drivers and
> bios. That's the first thing I checked for.  I unclocked my PC back to a p-133
> and that didn't work. I'm at my wits end here. I need to play ICR2. I already
> missed to league races because of this. Please help me. I am depending on all
> of you. You have helped me with problems before, and once again I am calling on
> all the sim community to help their fellow sim racer in crisis. I obviously can
> not depend on Hercules for help. thank you all. And, please??

ddjhenri

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by ddjhenri » Tue, 26 Jan 1999 04:00:00

  several things.   Does your Motherboard support DMA transfers?
not only update your video bios, but also update your Motherboard bios.
(helps with y2k also{usually})  You'll need several files to make icr2 work
with the Herc.  Allison Hine's gpl website is one(search for eagle woman)
and Bjorn's 3d is another. www.bjorn3d.com
good luck.
dave henrie


>>First thing you do,   go here:  http://www.hercules.com/support/thriller/

>>If you haven't already done so, download and install the latest BIOS and
>>drivers for your model card, they can be found at the address I just gave
>>you.  The original BIOS and drivers that come with the card just plain
suck.

>>Also, read the FAQ at that address, it has some very good tips.

>>Hope this helps,
>>Jim
>>JimWagon on TEN

>The installation CD that came with board has all of the latest drivers and
>bios. That's the first thing I checked for.  I unclocked my PC back to a
p-133
>and that didn't work. I'm at my wits end here. I need to play ICR2. I
already
>missed to league races because of this. Please help me. I am depending on
all
>of you. You have helped me with problems before, and once again I am
calling on
>all the sim community to help their fellow sim racer in crisis. I obviously
can
>not depend on Hercules for help. thank you all. And, please??

Guy Leac

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by Guy Leac » Wed, 27 Jan 1999 04:00:00

Hi
I had a similar problem when I first got the card.
The computer wouldn't even boot up after the vid card was slotted in.
I have a pII266 o/cd to 300 and I had to unclock the proccessor to its normal
speed, install the card and all its drivers, and then I was able to o/c it again.
Hope this helps

> HELP!!!
> I just installed the Thriller 3D 8mb PCI card and ARGH!!!
> I'm running a P-133 (overclocked to 180), 80mb ram, 3 hardrives, win 98

> after installing the card, my cpu freezes, dos mode will not work, my videos
> have no picture, only sounds, and other stuff. I bought the card so I could use
> ICR2 in rendition mode. And I can't do this yet. Please hlpe me. I called the
> Hercules tech support at 11:00 a.m.  and it is now 5:00 p.m. and they haven't
> called back. Please help me. thanx.

Don Burnett

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by Don Burnett » Wed, 27 Jan 1999 04:00:00

I'm running the Thriller 8mb pci card and win/98 with no problems at all.
Make sure you have the last bios and drivers from the Herc website. For ICR2
though, I believe you will need to get a patch from one of the sim sites for
it to work, maybe Bjorn's rendition site.

--
Don Burnette
Palmetto Racing
Dburn on Ten


>HELP!!!
>I just installed the Thriller 3D 8mb PCI card and ARGH!!!
>I'm running a P-133 (overclocked to 180), 80mb ram, 3 hardrives, win 98

>after installing the card, my cpu freezes, dos mode will not work, my
videos
>have no picture, only sounds, and other stuff. I bought the card so I could
use
>ICR2 in rendition mode. And I can't do this yet. Please hlpe me. I called
the
>Hercules tech support at 11:00 a.m.  and it is now 5:00 p.m. and they
haven't
>called back. Please help me. thanx.

TRUSRS

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by TRUSRS » Wed, 27 Jan 1999 04:00:00

The installation CD that came with board has all of the latest drivers and
bios. That's the first thing I checked for.  I unclocked my PC back to a p-133
and that didn't work. I'm at my wits end here. I need to play ICR2. I already
missed to league races because of this. Please help me. I am depending on all
of you. You have helped me with problems before, and once again I am calling on
all the sim community to help their fellow sim racer in crisis. I obviously can
not depend on Hercules for help. thank you all. And, please??

Doug

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by Doug » Wed, 27 Jan 1999 04:00:00

Before installing the card did you set your video back to standard VGA and
remove the drivers for the old video card? If you didn't, then this is
probably your problem.
Since you are running a 133,  make sure you have the latest BIOS for your
mother board.

Doug


>HELP!!!
>I just installed the Thriller 3D 8mb PCI card and ARGH!!!
>I'm running a P-133 (overclocked to 180), 80mb ram, 3 hardrives, win 98

>after installing the card, my cpu freezes, dos mode will not work, my
videos
>have no picture, only sounds, and other stuff. I bought the card so I could
use
>ICR2 in rendition mode. And I can't do this yet. Please hlpe me. I called
the
>Hercules tech support at 11:00 a.m.  and it is now 5:00 p.m. and they
haven't
>called back. Please help me. thanx.

XCR6

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by XCR6 » Wed, 27 Jan 1999 04:00:00

My system froze too anytime I tried to run any DOS app. after instaling Win 98.
I have the same card as you, and downloaded the latest drivers off the website,
and everything is fine now...............I thought mine had the latest drivers
too. It did have the latest BIOS, but not the latest drivers evidently.

T

schwab

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by schwab » Wed, 27 Jan 1999 04:00:00

Hi,

The suggestion about setting it back to a 66mhz bus first is a good one.
Then OC it again. BUT make sure you have good cooling! I didn't at first
and had trouble at 75mhz. Then i put another fan on the bottom of the
case drawing air IN and reversed the power supply fan to go OUT. That
helped a lot, expecially because the IN fan on the bottom was blowing at
the Thriller. Also, make sure in GPL you have the W95 screen saver
turned OFF when you are playing the game. That can cause lockups.

_Dave


> HELP!!!
> I just installed the Thriller 3D 8mb PCI card and ARGH!!!
> I'm running a P-133 (overclocked to 180), 80mb ram, 3 hardrives, win 98

> after installing the card, my cpu freezes, dos mode will not work, my videos
> have no picture, only sounds, and other stuff. I bought the card so I could use
> ICR2 in rendition mode. And I can't do this yet. Please hlpe me. I called the
> Hercules tech support at 11:00 a.m.  and it is now 5:00 p.m. and they haven't
> called back. Please help me. thanx.

TRUSRS

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by TRUSRS » Wed, 27 Jan 1999 04:00:00

I did remove the old video card drivers, but I can not find the updated bios to
my motherboard anywhere. I called Hercules 4 times today and they never called
me back.

TRUSRS

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by TRUSRS » Wed, 27 Jan 1999 04:00:00

The drivers on the CD-Rom ae dated November 1998, while the drivers on the
website are dated earlier than that. I have installed driver version # .85.xxxx
I re-installed everything today all over again but nothing worked.
My cpu freezes, the mpg/avi/mov videos have no picture, dos won't work, and the
screen doesn't fill my monitor.

Ferdinand Trauttmansdor

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by Ferdinand Trauttmansdor » Thu, 28 Jan 1999 04:00:00


>HELP!!!
>I just installed the Thriller 3D 8mb PCI card and ARGH!!!
...
>after installing the card, my cpu freezes, dos mode will not work, ...

I had a similar problem and, after trying all the updated drivers and
bios upgrades, I finally discovered a small suggestion in the Thriller
readme file that the card may refuse to run in the first PCI slot.
They suggested installing the card in a different slot and THAT cured
the problem for me.

        -Ferdinand-

Ronald Stoeh

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by Ronald Stoeh » Thu, 28 Jan 1999 04:00:00


snip

> The drivers on the CD-Rom ae dated November 1998, while the drivers on the
> website are dated earlier than that. I have installed driver version # .85.xxxx
> I re-installed everything today all over again but nothing worked.
> My cpu freezes, the mpg/avi/mov videos have no picture, dos won't work, and the
> screen doesn't fill my monitor.

Uff, my CD has August 1998 on it, I checked the website and found only
older
drivers, too! Where do they hide the latest drivers, in some closet at
Hercules?

BTW, GPL is really optimized for Rendition, as I just put in the
Thriller, added
some features (full mirrors) and still get 36fps with no car ahead,
which my
V2 SLI never reached...

l8er
ronny

--
Your mouse has moved. Windows must be restarted for the change
to take effect. Reboot now?
          |\      _,,,---,,_        I want to die like my Grandfather,
   ZZZzz /,`.-'`'    -.  ;-;;,_              in his sleep.
        |,4-  ) )-,_. ,\ (  `'-'     Not like the people in his car,
       '---''(_/--'  `-'\_)            screaming their heads off!

TRUSRS

Herc Thriller 3D 8mb PCI - HHHHEEEEEELLLLPPPPPP!!!!!1

by TRUSRS » Fri, 29 Jan 1999 04:00:00

Problem solved. The driver was screwed up. Now on to find rendition enhanced
tracks for ICR2 that are very easy to install.


rec.autos.simulators is a usenet newsgroup formed in December, 1993. As this group was always unmoderated there may be some spam or off topic articles included. Some links do point back to racesimcentral.net as we could not validate the original address. Please report any pages that you believe warrant deletion from this archive (include the link in your email). RaceSimCentral.net is in no way responsible and does not endorse any of the content herein.