rec.autos.simulators

Problems with GPL

Rod Bank

Problems with GPL

by Rod Bank » Tue, 07 Apr 1998 04:00:00

I have downloaded GPL and have installed it. But when I go to load the
program I get the follownig error message:

GPL executed an invalid instruction in
module GPL.EXE at 0137:004866f9.
Registers:
EAX=00000000 CS=0137 EIP=004866f9 EFLGS=00010216
EBX=00c2fcb0 SS=013f ESP=00c2fb6c EBP=00c2fbc4
ECX=00081000 DS=013f ESI=00000001 FS=0daf
EDX=00101fe8 ES=013f EDI=00000001 GS=0d9e
Bytes at CS:EIP:
0f 31 8b f0 8a 45 08 84 c0 89 75 f4 74 13 68 00
Stack dump:
00000001 00000001 00c2fcb0 0048688d 00000000 00081000 00485612 00081000
00c2fba4 00000001 ffffffff 00c2fcb0 0048558a 00000000 00080000 00000000

I am running a Cyrix chip P166+ along with an ATI Pro Turbo Graphic
card. I know I cannot expect 3D graphics but is there a compatibility
problem with the Cyrix chip?

Any help would be appreciated.

KingR

Problems with GPL

by KingR » Wed, 08 Apr 1998 04:00:00

Could you perhaps be running a cyrix chip? Both me and my brother tried
installing it on our computers and we both got the same GPF errors when
running the game....From reading around on the web it appears others with
Cyrix chips are experiencing the same problem.

Any official word on the demo's compatibility with Cyrix chips?

Mike

: I have downloaded GPL and have installed it. But when I go to load the
: program I get the follownig error message:

: GPL executed an invalid instruction in
: module GPL.EXE at 0137:004866f9.
: Registers:
: EAX=00000000 CS=0137 EIP=004866f9 EFLGS=00010216
: EBX=00c2fcb0 SS=013f ESP=00c2fb6c EBP=00c2fbc4
: ECX=00081000 DS=013f ESI=00000001 FS=0daf
: EDX=00101fe8 ES=013f EDI=00000001 GS=0d9e
: Bytes at CS:EIP:
: 0f 31 8b f0 8a 45 08 84 c0 89 75 f4 74 13 68 00
: Stack dump:
: 00000001 00000001 00c2fcb0 0048688d 00000000 00081000 00485612 00081000
: 00c2fba4 00000001 ffffffff 00c2fcb0 0048558a 00000000 00080000 00000000

: I am running a Cyrix chip P166+ along with an ATI Pro Turbo Graphic
: card. I know I cannot expect 3D graphics but is there a compatibility
: problem with the Cyrix chip?

: Any help would be appreciated.

--
--


KingR

Problems with GPL

by KingR » Wed, 08 Apr 1998 04:00:00

er....upon further reading of your post i see you have a cyrix chip :)

*sound of me eating crow*

mike

: Could you perhaps be running a cyrix chip? Both me and my brother tried
: installing it on our computers and we both got the same GPF errors when
: running the game....From reading around on the web it appears others with
: Cyrix chips are experiencing the same problem.

: Any official word on the demo's compatibility with Cyrix chips?

: Mike


: : I have downloaded GPL and have installed it. But when I go to load the
: : program I get the follownig error message:

: : GPL executed an invalid instruction in
: : module GPL.EXE at 0137:004866f9.
: : Registers:
: : EAX=00000000 CS=0137 EIP=004866f9 EFLGS=00010216
: : EBX=00c2fcb0 SS=013f ESP=00c2fb6c EBP=00c2fbc4
: : ECX=00081000 DS=013f ESI=00000001 FS=0daf
: : EDX=00101fe8 ES=013f EDI=00000001 GS=0d9e
: : Bytes at CS:EIP:
: : 0f 31 8b f0 8a 45 08 84 c0 89 75 f4 74 13 68 00
: : Stack dump:
: : 00000001 00000001 00c2fcb0 0048688d 00000000 00081000 00485612 00081000
: : 00c2fba4 00000001 ffffffff 00c2fcb0 0048558a 00000000 00080000 00000000

: : I am running a Cyrix chip P166+ along with an ATI Pro Turbo Graphic
: : card. I know I cannot expect 3D graphics but is there a compatibility
: : problem with the Cyrix chip?

: : Any help would be appreciated.

: --
: --


--
--


Jim Sokolof

Problems with GPL

by Jim Sokolof » Wed, 08 Apr 1998 04:00:00


> Could you perhaps be running a cyrix chip?



> : I have downloaded GPL and have installed it. But when I go to load the
> : program I get the follownig error message:
> : I am running a Cyrix chip P166+ along with an ATI Pro Turbo Graphic
> : card. I know I cannot expect 3D graphics but is there a compatibility
> : problem with the Cyrix chip?

---Jim
Ralph Willia

Problems with GPL

by Ralph Willia » Wed, 08 Apr 1998 04:00:00



> Hi all I have a Cyrix PR200 and am getting the same error. I am going
> ro send an email to papy to address this. This is what demos are for I
> guess. Ill let everyone know if I hear anyrthing. If anyone else hears

> Thanks

> Jim

I have no problems at all.
I am running the demo on a PR233MX Cyrix, M-Tech R534
Mother Board,
64MB EDO, Matrox Mystique 2MB, MaxiGamer 3DFX Voodoo,
SB16 SCSI-2,
T2 using my CH pedals.
Processor is OC'ed to 200mhz 3x66mhz from a stock
setting of 2.5x75
(187mhz)
Runs smooth at 800x600 with everything turned on.
I think you folks really need to look someplace other
than the CPU
for a solution to your problem.
Ralph Williams



> >I have downloaded GPL and have installed it. But when I go to load the
> >program I get the follownig error message:

> >GPL executed an invalid instruction in
> >module GPL.EXE at 0137:004866f9.
> >Registers:
> >EAX=00000000 CS=0137 EIP=004866f9 EFLGS=00010216
> >EBX=00c2fcb0 SS=013f ESP=00c2fb6c EBP=00c2fbc4
> >ECX=00081000 DS=013f ESI=00000001 FS=0daf
> >EDX=00101fe8 ES=013f EDI=00000001 GS=0d9e
> >Bytes at CS:EIP:
> >0f 31 8b f0 8a 45 08 84 c0 89 75 f4 74 13 68 00
> >Stack dump:
> >00000001 00000001 00c2fcb0 0048688d 00000000 00081000 00485612 00081000
> >00c2fba4 00000001 ffffffff 00c2fcb0 0048558a 00000000 00080000 00000000

> >I am running a Cyrix chip P166+ along with an ATI Pro Turbo Graphic
> >card. I know I cannot expect 3D graphics but is there a compatibility
> >problem with the Cyrix chip?

> >Any help would be appreciated.

Yea

Problems with GPL

by Yea » Thu, 09 Apr 1998 04:00:00

Hi all I have a Cyrix PR200 and am getting the same error. I am going
ro send an email to papy to address this. This is what demos are for I
guess. Ill let everyone know if I hear anyrthing. If anyone else hears

Thanks

Jim



Byron Forbe

Problems with GPL

by Byron Forbe » Fri, 10 Apr 1998 04:00:00


> I have no problems at all.
> I am running the demo on a PR233MX Cyrix, M-Tech R534
> Mother Board,
> 64MB EDO, Matrox Mystique 2MB, MaxiGamer 3DFX Voodoo,
> SB16 SCSI-2,
> T2 using my CH pedals.
> Processor is OC'ed to 200mhz 3x66mhz from a stock
> setting of 2.5x75
> (187mhz)
> Runs smooth at 800x600 with everything turned on.
> I think you folks really need to look someplace other
> than the CPU
> for a solution to your problem.

  I'll bet it's because your 233 is more current.
Alis

Problems with GPL

by Alis » Mon, 13 Apr 1998 04:00:00

I believe older Cyrix chips (and AMD K5's) lack a feature which provides
a stable, reliable clock that is accessible to software applications.
If Papyrus is using this feature in GPL, perhaps that would explain why
older Cyrixes seem to be giving problems with the GPL demo, while newer
Cyrixes and AMD K6's seem to work fine.  

K6's are getting to be dirt cheap these days.  At a recent computer
show, I saw K6-200's hovering dangerously near the $100 price point.
IMHO, GPL is worth the cost of the upgrade.

Alison



>> I have no problems at all.
>> I am running the demo on a PR233MX Cyrix, M-Tech R534
>> Mother Board,
>> 64MB EDO, Matrox Mystique 2MB, MaxiGamer 3DFX Voodoo,
>> SB16 SCSI-2,
>> T2 using my CH pedals.
>> Processor is OC'ed to 200mhz 3x66mhz from a stock
>> setting of 2.5x75
>> (187mhz)
>> Runs smooth at 800x600 with everything turned on.
>> I think you folks really need to look someplace other
>> than the CPU
>> for a solution to your problem.

>  I'll bet it's because your 233 is more current.

Eagle Woman



Remove the spam blocker NOSPAM to email me.
http://www.nh.ultranet.com/~alison/


rec.autos.simulators is a usenet newsgroup formed in December, 1993. As this group was always unmoderated there may be some spam or off topic articles included. Some links do point back to racesimcentral.net as we could not validate the original address. Please report any pages that you believe warrant deletion from this archive (include the link in your email). RaceSimCentral.net is in no way responsible and does not endorse any of the content herein.