I am running N4 in in D3D (OpenGL frame rate is currently much slower for me
than D3D) and I use the generic V5 setup as found in 3dfx Tools.
Thanks,
Russell
>> I've seen Tom Pabst's write up on setting up the GeForce 2 for maximum
> video
>> performance. Are there some similar tweaks/tips for the VooDoo 5 card
> that
>> anyone can recommend?
>> I am running N4 in in D3D (OpenGL frame rate is currently much slower for
> me
>> than D3D) and I use the generic V5 setup as found in 3dfx Tools.
>> Thanks,
>> Russell
> > while not sim-racing specific, the tweeks over at voodoosource.net
should
> > get you headed in the proper direction
> > dave henrie
> >> I've seen Tom Pabst's write up on setting up the GeForce 2 for maximum
> > video
> >> performance. Are there some similar tweaks/tips for the VooDoo 5 card
> > that
> >> anyone can recommend?
> >> I am running N4 in in D3D (OpenGL frame rate is currently much slower
for
> > me
> >> than D3D) and I use the generic V5 setup as found in 3dfx Tools.
> >> Thanks,
> >> Russell
Thanks Dave. That got it.
>> Dave. What is the url? I tried www.voodoosource.net and didn't get
>> anything.
>>> while not sim-racing specific, the tweeks over at voodoosource.net
> should
>>> get you headed in the proper direction
>>> dave henrie
>>>> I've seen Tom Pabst's write up on setting up the GeForce 2 for maximum
>>> video
>>>> performance. Are there some similar tweaks/tips for the VooDoo 5 card
>>> that
>>>> anyone can recommend?
>>>> I am running N4 in in D3D (OpenGL frame rate is currently much slower
> for
>>> me
>>>> than D3D) and I use the generic V5 setup as found in 3dfx Tools.
>>>> Thanks,
>>>> Russell
Thanks for the link. I made a few changes and also flashed the bios on the
V5, but it is difficult to tell if anything changed. At least I'll say
there were no dramatic changes. I'll just keep playing around with settings.
By the way, who could possible use OpenGL over D3D in N4? In a case where
D3D gives me 35fps, OpenGL gives me 5. Is this normal?
Russell
> > I am running N4 in in D3D (OpenGL frame rate is currently much slower
for
> me
> > than D3D) and I use the generic V5 setup as found in 3dfx Tools.
> > Thanks,
> > Russell
> Thanks for the link. I made a few changes and also flashed the bios on the
> V5, but it is difficult to tell if anything changed. At least I'll say
> there were no dramatic changes. I'll just keep playing around with
settings.
> By the way, who could possible use OpenGL over D3D in N4? In a case where
> D3D gives me 35fps, OpenGL gives me 5. Is this normal?
> Russell
> > while not sim-racing specific, the tweeks over at voodoosource.net
should
> > get you headed in the proper direction
> > dave henrie
> > > I've seen Tom Pabst's write up on setting up the GeForce 2 for maximum
> > video
> > > performance. Are there some similar tweaks/tips for the VooDoo 5 card
> > that
> > > anyone can recommend?
> > > I am running N4 in in D3D (OpenGL frame rate is currently much slower
> for
> > me
> > > than D3D) and I use the generic V5 setup as found in 3dfx Tools.
> > > Thanks,
> > > Russell
> Dave,
> By the way, who could possible use OpenGL over D3D in N4? In a case where
> D3D gives me 35fps, OpenGL gives me 5. Is this normal?
> Russell
I found it in the site you recommended that I take a look. Specifically
at::
http://www.voodoosource.net/3dfx/bios.shtml
I had version 1.06 so I flashed to 1.18. I don't know what changed but I
figured why not have the latest. There are also bios versions that have
been modified, but I steered away from them.
Russell
> > Thanks for the link. I made a few changes and also flashed the bios on
the
> > V5, but it is difficult to tell if anything changed. At least I'll say
> > there were no dramatic changes. I'll just keep playing around with
> settings.
> > By the way, who could possible use OpenGL over D3D in N4? In a case
where
> > D3D gives me 35fps, OpenGL gives me 5. Is this normal?
> > Russell
> > > while not sim-racing specific, the tweeks over at voodoosource.net
> should
> > > get you headed in the proper direction
> > > dave henrie
> > > > I've seen Tom Pabst's write up on setting up the GeForce 2 for
maximum
> > > video
> > > > performance. Are there some similar tweaks/tips for the VooDoo 5
card
> > > that
> > > > anyone can recommend?
> > > > I am running N4 in in D3D (OpenGL frame rate is currently much
slower
> > for
> > > me
> > > > than D3D) and I use the generic V5 setup as found in 3dfx Tools.
> > > > Thanks,
> > > > Russell
