rec.autos.simulators

I mainly use my 3dfx card (Pure 3d, Voodoo1) for games, but GPL is so
awesome that I'm considering upgrading my system.  I'm currently running a
PII 266 on an ASUS P2L97 MB, 64MB SDRAM, and a Viper 330 AGP as a primary
card, with the Canopus as the secondary.  I run the game fully from my 4.2GB
SCSI HD.  What I'm considering is getting a voodoo2 as a secondary, and a
Rendition-based AGP card as a primary.  I'm also considering getting a
333mhz PII processor.

Has anyone had any experience with similar equipment?  Any info, opinions,
thoughts, etc., are welcome.

Many thanks,
L.S.

GPL will respond well to a cpu upgrade. I'm running a 333 clocked to 416
with a Voodoo 2 - latest reference drivers. This is an excellent
combination. I'm about to test the same with an sli setup and I'll report
back to this NG on how much difference it makes. FYI, I'm using a Gigabyte
BX m/board (GA-6BXC) at 83Mhz with standard 10ns SDRAM. In order to run at
83Mhz you will almost certainly need to change the CAS latency from auto to
3. I have no experience with the rendition card (so far impossible to
locate!) but hearesay has it that it will cause no problems for the Voodoo
2. However, you should consider whether you actually need the Voodoo 2 if
you are buying a rendition and particularly if you don't like the idea of
clocking your CPU. . The consensus seems to be that up to a PII 300 and a
GPL resolution of 800x600 the latest rendition-based cards are actually
faster than the Voodoo 2s. There are good reasons for this which have been
gone into elsewhere. Once you go to faster CPUs and higher resolutions the
advantage swings to the Voodoo.

On Thu, 15 Oct 1998 13:15:48 -0400, "Luis and Maribel Soto"