rec.autos.simulators

by **John Hartridg** » Thu, 26 Sep 1996 04:00:00

I am thinking of getting the CH Pedals to use with driving sims
to use with the Suncom G-Force flight yoke I already have. But
I only have a joystick port that will accept one joystick. So I
was wonderring if anyone knows if the Pedals and yoke can be
connected together (out of the box, as it were) to look like
the x and y axes of one joystick (I'm not really interested in
using the y axis of the yoke) or would I need to make an adaptor
cable to connect them or do I need a new games port as the
pedals and yoke will require one whole joystick port each ??

Thanks.

John

--
John Hartridge | Crosfield Electronics Ltd,
ext 3282 | Three Cherry Trees Lane,

by **David Spark** » Thu, 26 Sep 1996 04:00:00

>I am thinking of getting the CH Pedals to use with driving sims
>to use with the Suncom G-Force flight yoke I already have. But
>I only have a joystick port that will accept one joystick. So I
>was wonderring if anyone knows if the Pedals and yoke can be
>connected together (out of the box, as it were) to look like
>the x and y axes of one joystick (I'm not really interested in
>using the y axis of the yoke) or would I need to make an adaptor
>cable to connect them or do I need a new games port as the
>pedals and yoke will require one whole joystick port each ??

>Thanks.

>John

>--
>John Hartridge | Crosfield Electronics Ltd,
>ext 3282 | Three Cherry Trees Lane,

I have the CH pedals and they are wired to the second joystick port. They
can be setup so that throttle and brake are on a single axis or on two
separate axes. You could make an adapter that wired them to the y-axis of
the first joystick port and set the switch to single axis mode.

Dave (davids) Sparks
Late Night League
http://www.sequoia-dev.com/Hawaii/latenite.html

by **Andre'** » Thu, 26 Sep 1996 04:00:00

> >I am thinking of getting the CH Pedals to use with driving sims
> >to use with the Suncom G-Force flight yoke I already have. But
> >I only have a joystick port that will accept one joystick. So I
> >was wonderring if anyone knows if the Pedals and yoke can be
> >connected together (out of the box, as it were) to look like
> >the x and y axes of one joystick (I'm not really interested in
> >using the y axis of the yoke) or would I need to make an adaptor
> >cable to connect them or do I need a new games port as the
> >pedals and yoke will require one whole joystick port each ??

> >Thanks.

> >John

> I have the CH pedals and they are wired to the second joystick port. They
> can be setup so that throttle and brake are on a single axis or on two
> separate axes. You could make an adapter that wired them to the y-axis
of
> the first joystick port and set the switch to single axis mode.

> Dave (davids) Sparks

Well, I'm not sure what type of crack your on, but MY CH pedals has a
Y-adapter built into the connection. Therefore allowing my Suncom F-15E
Eagle to plug into my CH throttle which then plugs in to the pedals which
ultimately plug into my Joystick port! WOW no special adpt. needed.

-didn't mean to get *** w/ you Dave-

-Andre'

rec.autos.simulators

CH Pedals and Joystick

CH Pedals and Joystick

CH Pedals and Joystick

CH Pedals and Joystick