you should be able to use the wheel now in most sims if the axises
axae ;-) are recognized by windows / dx calibration. I guess your
problem is with the sw profiling software then? Most modern sims allow
you to customize ff in-game or by editing text-based ini files, so you
might want to try without the profiler software first.
All the best,
uwe
--
GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
it iz unfortunately how drivers (thanks to Microsoft OS & wheel drivers (on
the MS wheel even) were written and recognized. best you will be able to do
IIRC, is combined axis, limited support of wheel. you will have to get some
other wheel. I helped with others trying this too, never got lucky enough
to see it work, lucky enough back then you could buy a Microsoft usb version
readily and easily...
>> Hi Guys
>> I have been trying to get my son's old Msffb gameport wheel to work for
>> him,i ordered a rockfire rm203 (USB converter) from the states,after
>> connecting to computer using sidewinder 4.0 software {mode 3} i get 4
> button
>> 4 axis,it comes up with z rotation etc,it will not recognise it as a
> wheel,i
>> have tried all modes to the same response.If anyone out there has a
> similar
>> config would you please advise how you got the wheel to be recognised.
>> Athlon 2000
>> A7N8X-X MB
>> 512 ram
>> GF2 ti card
>> wins XP
>> Thanks in Advance
>> Den
> it iz unfortunately how drivers (thanks to Microsoft OS & wheel drivers
(on
> the MS wheel even) were written and recognized. best you will be able to
do
> IIRC, is combined axis, limited support of wheel. you will have to get
some
> other wheel. I helped with others trying this too, never got lucky enough
> to see it work, lucky enough back then you could buy a Microsoft usb
version
> readily and easily...
> > Thanks Uwe for your reply,unfortunatly i did not make myself clear,it
> > comes
> > up with 4 button 4 axis but it will not let me calibrate,also the wheel
> > is
> > not showing any calibration, (in any of the 4 modes on the rockfire) if
i
> > directly connect my own wheel (Msffb-usb} the system recognises it
> > instantly,so the system is fine just will not recognise the gameport
> > version
> > connected through the Rockfire adaptor.
> > TIA
> > den
> >> Hi Guys
> >> I have been trying to get my son's old Msffb gameport wheel to work
for
> >> him,i ordered a rockfire rm203 (USB converter) from the states,after
> >> connecting to computer using sidewinder 4.0 software {mode 3} i get 4
> > button
> >> 4 axis,it comes up with z rotation etc,it will not recognise it as a
> > wheel,i
> >> have tried all modes to the same response.If anyone out there has a
> > similar
> >> config would you please advise how you got the wheel to be recognised.
> >> Athlon 2000
> >> A7N8X-X MB
> >> 512 ram
> >> GF2 ti card
> >> wins XP
> >> Thanks in Advance
> >> Den
Cheers!
Remco
Den enlightened us with:
>> it iz unfortunately how drivers (thanks to Microsoft OS & wheel
>> drivers (on the MS wheel even) were written and recognized. best
>> you will be able to do IIRC, is combined axis, limited support of
>> wheel. you will have to get some other wheel. I helped with others
>> trying this too, never got lucky enough to see it work, lucky enough
>> back then you could buy a Microsoft usb version readily and easily...
>>> Thanks Uwe for your reply,unfortunatly i did not make myself
>>> clear,it comes
>>> up with 4 button 4 axis but it will not let me calibrate,also the
>>> wheel is
>>> not showing any calibration, (in any of the 4 modes on the
>>> rockfire) if i directly connect my own wheel (Msffb-usb} the system
>>> recognises it instantly,so the system is fine just will not
>>> recognise the gameport version
>>> connected through the Rockfire adaptor.
>>> TIA
>>> den
>>>> Hi Guys
>>>> I have been trying to get my son's old Msffb gameport wheel to
>>>> work for him,i ordered a rockfire rm203 (USB converter) from the
>>>> states,after connecting to computer using sidewinder 4.0 software
>>>> {mode 3} i get 4 button 4 axis,it comes up with z rotation etc,it
>>>> will not recognise it as a wheel,i have tried all modes to the
>>>> same response.If anyone out there has a similar config would you
>>>> please advise how you got the wheel to be recognised. Athlon 2000
>>>> A7N8X-X MB
>>>> 512 ram
>>>> GF2 ti card
>>>> wins XP
>>>> Thanks in Advance
>>>> Den