I am going to replace my Chaintech MB with something that has adjustable
DMA latency timing. I only get something like 30MB/s with the DMA test
on my Sierra Screaming 3D and N2 does not run smooth at all.
I also want it to support SDRAM and the coming AMD K6. Has anyone tried
the K6 with a Rendition board?
Possibility to overclock to 75/83MHz would also be nice.
Anyone got any suggestions?
The upcoming TX based ABIT AX5 will support 83mhz.
--
Well, I know the ASUS P55T2P4 goes up to 83Mhz, I'm running it right
now. And at $159 it was a steal, unfortunatly, I had a prob with my
Sierra Screamin' 3D card while running at 83Mhz, so I "Tamed"
it down to "Only" 75..... so I'm running a p187 w\mmx......
lot better thatn the old 486, thats fer sure...
>--
>> For the ABIT I don't thnk it will do 83Mhz bus.. But 75Mhz is
>> feasiable.
I beleive it had more to do with windows than anything else,
it was one of the *.VxD files..... Go figure..... Still, it's better
than what I had...
>>Well, I know the ASUS P55T2P4 goes up to 83Mhz, I'm running it right
>>now. And at $159 it was a steal, unfortunatly, I had a prob with my
>>Sierra Screamin' 3D card while running at 83Mhz, so I "Tamed"
>>it down to "Only" 75..... so I'm running a p187 w\mmx......
>>lot better thatn the old 486, thats fer sure...
>Really?? You had problems with "83Mhz" bus on the T2P4?? I am running
>an Intergraph board w/R3d.. I have no problems..
>What were you symptoms?
>take care
>Julian "Mr. Turtle" Data
>IVGA Member 0004
>The N2 "SkunksWorks" is in progress
>Verite/3DFX owner
I just got a M-Technology Mustang R-534-G It runs faster then my old
TritonVX board and it supports 83 mhz plus it runs most all of the popular
cpu's
Denny M
> >The upcoming TX based ABIT AX5 will support 83mhz.
> >--
> Err... ET.. The AR5 does 83Mhz bus.. And supposedly the IT5H Rev1.2
> will support 83Mhz.. ABIT has communication problems for Rev1.1.. They
> only added TAG SRAM on the board to cache above 64MB..
> take care
> Julian "Mr. Turtle" Data
> IVGA Member 0004
> The N2 "SkunksWorks" is in progress
> Verite/3DFX owner
that mustang board sux bad.piece of junk
try a supermicro p5mms with the tx chipset
