rec.autos.simulators

T2 and Win95

Brian C.W. Jarvi

T2 and Win95

by Brian C.W. Jarvi » Sat, 13 Jul 1996 04:00:00

Okay, someone out there must be able to help. Does the following sound
like a Win95 problem (ie am I missing a driver or file?), a Thrustmaster
problem, or what....? I have been successfully running ICR2, through
DOS, and using my T2. Therefore I've never had to worry about changing
my Joystick configuration in Win95 - it's always been set to Gravis
GamePad. So yesterday I bought The Need For Speed - Special Edition. I
discover that I have to go to my Win95 Control Panel and change my
Joystick configuarion to a CUSTOM one (2axes, 4button, Race Controller).
BUT I CAN'T GET IT TO TAKE!! It keeps telling me that YOU JOYSTICK IS
NOT CONNECTED CORRECTLY and I can't calibrate it or test it! So
therefore I can't even make the Joystick Configuration Utility that came
with the NFSSE work... HELP!!!

Robert Wol

T2 and Win95

by Robert Wol » Mon, 15 Jul 1996 04:00:00


> Okay, someone out there must be able to help. Does the following sound
> like a Win95 problem (ie am I missing a driver or file?), a Thrustmaster
> problem, or what....? I have been successfully running ICR2, through
> DOS, and using my T2. Therefore I've never had to worry about changing
> my Joystick configuration in Win95 - it's always been set to Gravis
> GamePad. So yesterday I bought The Need For Speed - Special Edition. I
> discover that I have to go to my Win95 Control Panel and change my
> Joystick configuarion to a CUSTOM one (2axes, 4button, Race Controller).
> BUT I CAN'T GET IT TO TAKE!! It keeps telling me that YOU JOYSTICK IS
> NOT CONNECTED CORRECTLY and I can't calibrate it or test it! So
> therefore I can't even make the Joystick Configuration Utility that came
> with the NFSSE work... HELP!!!

I Found This on the Thrust Master Board.. This Should Work.. It Worked
For My T2,,,

Go into Custom in joystick Config..
In Custom make it a 2 Axes & 2 Button.. On Special Features Mark Is A
race Controller..
    Good Luck.. I Don't even have a ACM Card I have a Ch Products 3 And
it works Great!!! With It Configured

Scott Maris

T2 and Win95

by Scott Maris » Tue, 16 Jul 1996 04:00:00

I believe to get a T2 to work correctly under Win95, you
need a special adaptor from ThrustMaster.

Contact them...

/scott

--
Scott Marison, Software Engineer
Sierra On-Line/Papyrus Division

Christopher Fishe

T2 and Win95

by Christopher Fishe » Wed, 17 Jul 1996 04:00:00


> Okay, someone out there must be able to help. Does the following sound
> like a Win95 problem (ie am I missing a driver or file?), a Thrustmaster
> problem, or what....? I have been successfully running ICR2, through
> DOS, and using my T2. Therefore I've never had to worry about changing
> my Joystick configuration in Win95 - it's always been set to Gravis
> GamePad. So yesterday I bought The Need For Speed - Special Edition. I
> discover that I have to go to my Win95 Control Panel and change my
> Joystick configuarion to a CUSTOM one (2axes, 4button, Race Controller).
> BUT I CAN'T GET IT TO TAKE!! It keeps telling me that YOU JOYSTICK IS
> NOT CONNECTED CORRECTLY and I can't calibrate it or test it! So
> therefore I can't even make the Joystick Configuration Utility that came
> with the NFSSE work... HELP!!!

I found I had to use the Y axis converter with the T2, and now its fine. I
think win95 can onlt take input from 1 joystick port at a time.

Chris Fisher


rec.autos.simulators is a usenet newsgroup formed in December, 1993. As this group was always unmoderated there may be some spam or off topic articles included. Some links do point back to racesimcentral.net as we could not validate the original address. Please report any pages that you believe warrant deletion from this archive (include the link in your email). RaceSimCentral.net is in no way responsible and does not endorse any of the content herein.