In NASCAR 3, everything works except the brake. The brake pedal works in
the wheel setup in the control panel, but won't in NASCAR 3.
I see that it is the Y-Axis Down and the Gas is Y-Axis Up....
But N3 will only reconize the Gas pedal..
Anyone have any suggestions???
Thanks,
TAZ
hope this helps
Morris
> Anways, to be able to properly use your controller in N3, you have paint a
> big "24" on your side doors &...:-)
> Seriously, though, it sounds like you have the pedals set on "split axis"
> via whatever software act-labs gives you to set up your wheel. This gives an
> x-axis & y-axis, N3 won't recognize this. You need to set your pedals to a
> combined axis setting. I don't know how to do this with your wheel (being an
> MS wheel user, myself)
> Randy
> >I have gotten an Act Lab Force RS Wheel.
> >In NASCAR 3, everything works except the brake. The brake pedal works in
> >the wheel setup in the control panel, but won't in NASCAR 3.
> >I see that it is the Y-Axis Down and the Gas is Y-Axis Up....
> >But N3 will only reconize the Gas pedal..
> >Anyone have any suggestions???
> >Thanks,
> >TAZ
Thanks for your reply...
My wheel, the calabrate 1 screen is the gas and the wheel and the calabrate
2 screen does nothing.
And on the wheel config. The when I set the gas pedal is sets it to Y-Axis
Down.....but the RS instructs say the gas is Y-Axis up. And the brake also
does Y-Axis Down.........I don't know
Also, the wheel seems to have a big "dead Zone". I mean, I can move it back
and forth pretty good going down the backstretch at taladega and the car
hardly moves, is yours like this???
Any help would be appreciated...............
Thanks,
TAZ
> hope this helps
> Morris
> > Tazzie,
> > I recognize your handle from RASN.
> > Being the Earnhart fan that u are, I'm suprised you'd be worried about
> > brakes. Figured you'd just use the car ahaed of you to slow down (Maybe
TL 4
> > example)
> > Anways, to be able to properly use your controller in N3, you have paint
a
> > big "24" on your side doors &...:-)
> > Seriously, though, it sounds like you have the pedals set on "split
axis"
> > via whatever software act-labs gives you to set up your wheel. This
gives an
> > x-axis & y-axis, N3 won't recognize this. You need to set your pedals to
a
> > combined axis setting. I don't know how to do this with your wheel
(being an
> > MS wheel user, myself)
> > Randy
> > >I have gotten an Act Lab Force RS Wheel.
> > >In NASCAR 3, everything works except the brake. The brake pedal works
in
> > >the wheel setup in the control panel, but won't in NASCAR 3.
> > >I see that it is the Y-Axis Down and the Gas is Y-Axis Up....
> > >But N3 will only reconize the Gas pedal..
> > >Anyone have any suggestions???
> > >Thanks,
> > >TAZ
Anways, to be able to properly use your controller in N3, you have paint a
big "24" on your side doors &...:-)
Seriously, though, it sounds like you have the pedals set on "split axis"
via whatever software act-labs gives you to set up your wheel. This gives an
x-axis & y-axis, N3 won't recognize this. You need to set your pedals to a
combined axis setting. I don't know how to do this with your wheel (being an
MS wheel user, myself)
Randy
>In NASCAR 3, everything works except the brake. The brake pedal works in
>the wheel setup in the control panel, but won't in NASCAR 3.
>I see that it is the Y-Axis Down and the Gas is Y-Axis Up....
>But N3 will only reconize the Gas pedal..
>Anyone have any suggestions???
>Thanks,
>TAZ
Nascar 3 does recognize separate gas and brake axis's. You have to
calibrate both joysticks inside of nascar. Once you do this, you can
then set the controls.
