Can anyone give me any suggestions on settings for joystick driving in
Gp2 without steering help? i.e. max lock degrees, reduce w/car speed and
sensitivity settings etc... I'm a gumby, I know, but I've been using
steering help up til now and, having found it's limits have switched
over. My main problem is desensitizing the steering input. Can anyone
give me examples of the settings they use?
of the following:
Aotr> Can anyone give me any suggestions on settings for joystick driving in
Aotr> Gp2 without steering help? i.e. max lock degrees, reduce w/car speed and
Aotr> sensitivity settings etc...
Aotr> Can anyone
Aotr> give me examples of the settings they use?
You should have a look at
"http://www.powerup.com.au/~philmak/GP2MAN/control.htm#A5c Steering Summary"
This is a very good guide to set up your controls. In fact the whole site
is great for everybody who wants to get into GP2.
Cheers
B
--
Bernd Kuemmerlen
--------------------------------------------------------------------------
| http://www.rzuser.uni-heidelberg.de/~bkuemmer/ |
--------------------------------------------------------------------------
Are you using a Joystick or Steering Wheel/pedal controller? The best
way to desensitize the steering is to set it up in the Controller Config
so that the faster you are moving, the more steering input is required
to turn the same distance. Basically, this is speed sensitive steering.
Make sure that on the tight corners, you can still power through the
corners with some steering input left to spare, otherwise, if you go
through the corner too quickly (or if the speed sensitive steering input
is too high a figure) then you will be at maximum lock with the wheel,
but the corner will be too tight to negotiate.
Also, turn opposite lock help ON, as this helps you to catch the back
end of the car if it begins to fishtail.
> > Can anyone give me any suggestions on settings for joystick driving
> in
> > Gp2 without steering help? i.e. max lock degrees, reduce w/car speed
> and
> > sensitivity settings etc... I'm a gumby, I know, but I've been using
> > steering help up til now and, having found it's limits have switched
> > over. My main problem is desensitizing the steering input. Can
> anyone
> > give me examples of the settings they use?
> Are you using a Joystick or Steering Wheel/pedal controller? The best
> way to desensitize the steering is to set it up in the Controller
> Config
> so that the faster you are moving, the more steering input is required
> to turn the same distance. Basically, this is speed sensitive
> steering.
> Make sure that on the tight corners, you can still power through the
> corners with some steering input left to spare, otherwise, if you go
> through the corner too quickly (or if the speed sensitive steering
> input
> is too high a figure) then you will be at maximum lock with the wheel,
> but the corner will be too tight to negotiate.
> Also, turn opposite lock help ON, as this helps you to catch
> the back
> end of the car if it begins to fishtail.
> > Can anyone give me any suggestions on settings for joystick driving in
> > Gp2 without steering help? i.e. max lock degrees, reduce w/car speed and
> > sensitivity settings etc... I'm a gumby, I know, but I've been using
> > steering help up til now and, having found it's limits have switched
> > over. My main problem is desensitizing the steering input. Can anyone
> > give me examples of the settings they use?
> Also, turn opposite lock help ON, as this helps you to catch the back
> end of the car if it begins to fishtail.
Clark
