rec.autos.simulators

by **David Ciemn** » Fri, 31 May 2002 10:10:01

Hi all..I have a TSW using W98se. How come the generic driver won't work in
N2002? I am sure the direct input is better but wanted to try it. Used to
work in N4.

DC

by **Bob Fellenbau** » Fri, 31 May 2002 10:45:27

If you ever get an answer to this question please let me know. I've been
asking the same thing for 6 mo. now. :)

by **David Ciemn** » Fri, 31 May 2002 11:39:42

Wonder if we should post on at a papy forum?

DC

> If you ever get an answer to this question please let me know. I've been
> asking the same thing for 6 mo. now. :)

> > Hi all..I have a TSW using W98se. How come the generic driver won't work
> in
> > N2002? I am sure the direct input is better but wanted to try it. Used
to
> > work in N4.

> > DC

by **Dave Henri** » Fri, 31 May 2002 13:17:29

"David Ciemny" <

no need you can get the answer right here:

A: Because

dave henrie

by **Tom Osbo** » Fri, 31 May 2002 13:43:28

You should be Bush's spokesperson lol

by **Gord** » Mon, 03 Jun 2002 11:24:33

I am succesfully running generic driver with my TSW2 cup wheel in Win98se. I
am plugged into the gameport of a Turtlr Beach Santa Cruz audio card. In
fact ,I started out running the DXdriver, and then switched over to generic.
Wheel seems a little smoother with generics. BTW did you make sure to pick "
Standard Gameport" under the Win98 joystick properties. Mine has two choices
and Dave at TSW told me to pick "Standard Gameport", and not any other.
Ed

by **Larr** » Mon, 03 Jun 2002 12:02:50

This will only work with pure analog controllers. The Papy driver won't
function with digital devices, unfortunately.

Most of today's wheel's, and all FF that I know of, are digital devices.

-Larry

> I am succesfully running generic driver with my TSW2 cup wheel in Win98se.
I
> am plugged into the gameport of a Turtlr Beach Santa Cruz audio card. In
> fact ,I started out running the DXdriver, and then switched over to
generic.
> Wheel seems a little smoother with generics. BTW did you make sure to pick
"
> Standard Gameport" under the Win98 joystick properties. Mine has two
choices
> and Dave at TSW told me to pick "Standard Gameport", and not any other.
> Ed

> > Hi all..I have a TSW using W98se. How come the generic driver won't work
> in
> > N2002? I am sure the direct input is better but wanted to try it. Used
to
> > work in N4.

> > DC

by **David Ciemn** » Tue, 04 Jun 2002 07:21:30

Hey gordo..I do have my settings set to standard gameport yet I cannot use
the generic. When I go to calibrate everything is blank. Strange like I
said..it works in gpl and N4. Curious on your thoughts...BTw it is plugged
into my Creative live value card.

DC

> I am succesfully running generic driver with my TSW2 cup wheel in Win98se.
I
> am plugged into the gameport of a Turtlr Beach Santa Cruz audio card. In
> fact ,I started out running the DXdriver, and then switched over to
generic.
> Wheel seems a little smoother with generics. BTW did you make sure to pick
"
> Standard Gameport" under the Win98 joystick properties. Mine has two
choices
> and Dave at TSW told me to pick "Standard Gameport", and not any other.
> Ed

> > Hi all..I have a TSW using W98se. How come the generic driver won't work
> in
> > N2002? I am sure the direct input is better but wanted to try it. Used
to
> > work in N4.

> > DC

by **Gord** » Wed, 05 Jun 2002 08:27:56

I forgot to mention, In the settings box, you also have to uncheck the box
"poll with intrupts enabled". Also I have no other controllers listed. I
only have one controller on my list which I added manually. It was chosen as
a "2 axis 4 button race car controller". You must choose "custom" when
adding this controller. Hope it helps. If you still have problems, I suggest
you call TSW tech support. They helped me install and calibrate mine when I
first got it.
Ed

> Hey gordo..I do have my settings set to standard gameport yet I cannot use
> the generic. When I go to calibrate everything is blank. Strange like I
> said..it works in gpl and N4. Curious on your thoughts...BTw it is plugged
> into my Creative live value card.

> DC

> > I am succesfully running generic driver with my TSW2 cup wheel in
Win98se.
> I
> > am plugged into the gameport of a Turtlr Beach Santa Cruz audio card.
In
> > fact ,I started out running the DXdriver, and then switched over to
> generic.
> > Wheel seems a little smoother with generics. BTW did you make sure to
pick
> "
> > Standard Gameport" under the Win98 joystick properties. Mine has two
> choices
> > and Dave at TSW told me to pick "Standard Gameport", and not any other.
> > Ed

> > > Hi all..I have a TSW using W98se. How come the generic driver won't
work
> > in
> > > N2002? I am sure the direct input is better but wanted to try it. Used
> to
> > > work in N4.

> > > DC

by **David Ciemn** » Wed, 05 Jun 2002 08:34:40

roger that..my settings are the same. Just can't get that generic driver to
work :o/

Thanks...

DC

> I forgot to mention, In the settings box, you also have to uncheck the box
> "poll with intrupts enabled". Also I have no other controllers listed. I
> only have one controller on my list which I added manually. It was chosen
as
> a "2 axis 4 button race car controller". You must choose "custom" when
> adding this controller. Hope it helps. If you still have problems, I
suggest
> you call TSW tech support. They helped me install and calibrate mine when
I
> first got it.
> Ed

> > Hey gordo..I do have my settings set to standard gameport yet I cannot
use
> > the generic. When I go to calibrate everything is blank. Strange like I
> > said..it works in gpl and N4. Curious on your thoughts...BTw it is
plugged
> > into my Creative live value card.

> > DC

> > > I am succesfully running generic driver with my TSW2 cup wheel in
> Win98se.
> > I
> > > am plugged into the gameport of a Turtlr Beach Santa Cruz audio card.
> In
> > > fact ,I started out running the DXdriver, and then switched over to
> > generic.
> > > Wheel seems a little smoother with generics. BTW did you make sure to
> pick
> > "
> > > Standard Gameport" under the Win98 joystick properties. Mine has two
> > choices
> > > and Dave at TSW told me to pick "Standard Gameport", and not any
other.
> > > Ed

> > > > Hi all..I have a TSW using W98se. How come the generic driver won't
> work
> > > in
> > > > N2002? I am sure the direct input is better but wanted to try it.
Used
> > to
> > > > work in N4.

> > > > DC

by **Gord** » Wed, 05 Jun 2002 11:15:16

Don't worry too much about it. The only difference I noticed over the Direct
Input setting is the dead area off center is less noticable to me. When I
first got the wheel, I had a pretty bad dead spot off center. I played
around with different linear and steering ratio settings until I got rid of
most of it. But it's still there a little bit. A few years ago I went to
Daytona to watch the finals of the "WON" series championships. The
simulators they used had ECCI wheels and they let the public try out the
sims the day before the race. That ECCI was perfection. That spoiled me for
all other wheels after I tried the ECCI. Even the TSW doesn't match it. Too
bad they don't sell them anymore, as if I could afford one...lol
Ed

> roger that..my settings are the same. Just can't get that generic driver
to
> work :o/

> Thanks...

> DC

> > I forgot to mention, In the settings box, you also have to uncheck the
box
> > "poll with intrupts enabled". Also I have no other controllers listed. I
> > only have one controller on my list which I added manually. It was
chosen
> as
> > a "2 axis 4 button race car controller". You must choose "custom" when
> > adding this controller. Hope it helps. If you still have problems, I
> suggest
> > you call TSW tech support. They helped me install and calibrate mine
when
> I
> > first got it.
> > Ed

> > > Hey gordo..I do have my settings set to standard gameport yet I cannot
> use
> > > the generic. When I go to calibrate everything is blank. Strange like
I
> > > said..it works in gpl and N4. Curious on your thoughts...BTw it is
> plugged
> > > into my Creative live value card.

> > > DC

> > > > I am succesfully running generic driver with my TSW2 cup wheel in
> > Win98se.
> > > I
> > > > am plugged into the gameport of a Turtlr Beach Santa Cruz audio
card.
> > In
> > > > fact ,I started out running the DXdriver, and then switched over to
> > > generic.
> > > > Wheel seems a little smoother with generics. BTW did you make sure
to
> > pick
> > > "
> > > > Standard Gameport" under the Win98 joystick properties. Mine has two
> > > choices
> > > > and Dave at TSW told me to pick "Standard Gameport", and not any
> other.
> > > > Ed

> > > > > Hi all..I have a TSW using W98se. How come the generic driver
won't
> > work
> > > > in
> > > > > N2002? I am sure the direct input is better but wanted to try it.
> Used
> > > to
> > > > > work in N4.

> > > > > DC

by **Goy Larse** » Wed, 05 Jun 2002 17:53:02

> roger that..my settings are the same. Just can't get that generic driver to
> work :o/

Same here David, thx for the effort though Gordo, much appreciated

And for the record, in previous Papy sims I've noticed a difference, not
a huge difference, but it somehow feels smoother with the generic Papy
driver and I kinda felt more comfy with it, oh well, starting to get
used to N2002 now

Beers and cheers
(uncle) Goy

"The Pits" http://www.theuspits.com/

"A man is only as old as the woman he feels"
--Groucho Marx--

by **Larr** » Thu, 06 Jun 2002 04:47:39

If you are using a digital controller, the Papy driver won't function.

-Larry

> > roger that..my settings are the same. Just can't get that generic driver
to
> > work :o/

> Same here David, thx for the effort though Gordo, much appreciated

> And for the record, in previous Papy sims I've noticed a difference, not
> a huge difference, but it somehow feels smoother with the generic Papy
> driver and I kinda felt more comfy with it, oh well, starting to get
> used to N2002 now

> Beers and cheers
> (uncle) Goy

> "The Pits" http://www.theuspits.com/

> "A man is only as old as the woman he feels"
> --Groucho Marx--

by **Goy Larse** » Thu, 06 Jun 2002 05:02:33

> If you are using a digital controller, the Papy driver won't function.

Very analogue, but thx for the reminder :-)

Beers and cheers
(uncle) Goy

http://www.theuspits.com

"A man is only as old as the woman he feels........"
--Groucho Marx--

by **David Ciemn** » Thu, 06 Jun 2002 09:24:14

"A man is only as old as the woman he feels"

LOL!!!!

> > If you are using a digital controller, the Papy driver won't function.

> Very analogue, but thx for the reminder :-)

> Beers and cheers
> (uncle) Goy

> http://www.theuspits.com

> "A man is only as old as the woman he feels........"
> --Groucho Marx--

rec.autos.simulators

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....

generic steerng driver in N2002....