rec.autos.simulators

by **Doug** » Fri, 03 May 2002 11:08:29

Same here. :( Solid system, everything up to date, no problems w/ anything
else. ERROR
Doug D

by **Haqsa** » Fri, 03 May 2002 11:53:38

Just a wild guess here, but are you running any firewalling software?
Because the first time I ran PRD, my firewall came up and said PRD was
trying to send out a broadcast packet. I had to allow that and then a
response on a different port before it worked properly. I'm using Kerio
Personal Firewall, if you are using something else like Black Ice or
ZoneAlarm it is possible that you are getting a page fault when it tries
to interrupt PRD.

> Same here. :( Solid system, everything up to date, no problems w/
anything
> else. ERROR
> Doug D

> > Folks, whats happening here?! :) Not patting my own back here or
bragging
> > but my system is solid as a rock and have had only 1 title over a
year ago
> > give me headaches on install. When I launch, I get the dreaded
Invalid
> Page
> > Fault - error PRD.EXE.

> > ok fine, I go into setup, get a page fault there too. Like I said,
> > everything (drivers etc) are very much up to date and installed
correctly.
> > For sh*ts and giggles, I un-installed, D/L from (2) different
mirrors and
> > each time, same invalid page fault's.
> > Latest Det drivers, current DX8 yadda, yadda, yadda.... :)

> > Anyone else? Any fixes here?
> > 130mph, 6 speed rocket :)

> > Tony Gaylord

> > --
> > _ _ _ _ _ _ _ _ _ _ _ _ _
> > Tony Gaylord - Vancouver, WA *USA*

> > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
> > http://www.NationalKarting.com
> > http://www.ShifterSafetygear.com
> > http://www.SharkShifter.com
> > http://www.PatsAcres.com
> > http://www.RSwyers.com/ Bro's site
> > http://www.EKartingnews.com
> > http://www.CART.com
> > `.??.`.??.`.??.><((((o>`.??.><((((o>
> > `.??.><((((o>`.??.`.??.><((((o>

by **Doug** » Fri, 03 May 2002 11:56:17

Never mind. Worked after reboot. It really bites. Waste of time.
Doug D

> Just a wild guess here, but are you running any firewalling software?
> Because the first time I ran PRD, my firewall came up and said PRD was
> trying to send out a broadcast packet. I had to allow that and then a
> response on a different port before it worked properly. I'm using Kerio
> Personal Firewall, if you are using something else like Black Ice or
> ZoneAlarm it is possible that you are getting a page fault when it tries
> to interrupt PRD.

> > Same here. :( Solid system, everything up to date, no problems w/
> anything
> > else. ERROR
> > Doug D

> > > Folks, whats happening here?! :) Not patting my own back here or
> bragging
> > > but my system is solid as a rock and have had only 1 title over a
> year ago
> > > give me headaches on install. When I launch, I get the dreaded
> Invalid
> > Page
> > > Fault - error PRD.EXE.

> > > ok fine, I go into setup, get a page fault there too. Like I said,
> > > everything (drivers etc) are very much up to date and installed
> correctly.
> > > For sh*ts and giggles, I un-installed, D/L from (2) different
> mirrors and
> > > each time, same invalid page fault's.
> > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :)

> > > Anyone else? Any fixes here?
> > > 130mph, 6 speed rocket :)

> > > Tony Gaylord

> > > --
> > > _ _ _ _ _ _ _ _ _ _ _ _ _
> > > Tony Gaylord - Vancouver, WA *USA*

> > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
> > > http://www.NationalKarting.com
> > > http://www.ShifterSafetygear.com
> > > http://www.SharkShifter.com
> > > http://www.PatsAcres.com
> > > http://www.RSwyers.com/ Bro's site
> > > http://www.EKartingnews.com
> > > http://www.CART.com
> > > `.??.`.??.`.??.><((((o>`.??.><((((o>
> > > `.??.><((((o>`.??.`.??.><((((o>

by **Tony Gaylor** » Fri, 03 May 2002 12:08:04

Now remember, like its been mentioned, it runs at DEFAULT at an insanely
high resolution. 1200x1600 I think. Back it down to 1024 or (EECCKKK!) 800
and see if its any better. I sure hope to hear that it is.....

TG

--
_ _ _ _ _ _ _ _ _ _ _ _ _
Tony Gaylord - Vancouver, WA *USA*

http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
http://www.NationalKarting.com
http://www.ShifterSafetygear.com
http://www.SharkShifter.com
http://www.PatsAcres.com
http://www.RSwyers.com/ Bro's site
http://www.EKartingnews.com
http://www.CART.com
`.??.`.??.`.??.><((((o>`.??.><((((o>
`.??.><((((o>`.??.`.??.><((((o>

> Never mind. Worked after reboot. It really bites. Waste of time.
> Doug D

> > Just a wild guess here, but are you running any firewalling software?
> > Because the first time I ran PRD, my firewall came up and said PRD was
> > trying to send out a broadcast packet. I had to allow that and then a
> > response on a different port before it worked properly. I'm using Kerio
> > Personal Firewall, if you are using something else like Black Ice or
> > ZoneAlarm it is possible that you are getting a page fault when it tries
> > to interrupt PRD.

> > > Same here. :( Solid system, everything up to date, no problems w/
> > anything
> > > else. ERROR
> > > Doug D

> > > > Folks, whats happening here?! :) Not patting my own back here or
> > bragging
> > > > but my system is solid as a rock and have had only 1 title over a
> > year ago
> > > > give me headaches on install. When I launch, I get the dreaded
> > Invalid
> > > Page
> > > > Fault - error PRD.EXE.

> > > > ok fine, I go into setup, get a page fault there too. Like I said,
> > > > everything (drivers etc) are very much up to date and installed
> > correctly.
> > > > For sh*ts and giggles, I un-installed, D/L from (2) different
> > mirrors and
> > > > each time, same invalid page fault's.
> > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :)

> > > > Anyone else? Any fixes here?
> > > > 130mph, 6 speed rocket :)

> > > > Tony Gaylord

> > > > --
> > > > _ _ _ _ _ _ _ _ _ _ _ _ _
> > > > Tony Gaylord - Vancouver, WA *USA*

> > > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
> > > > http://www.NationalKarting.com
> > > > http://www.ShifterSafetygear.com
> > > > http://www.SharkShifter.com
> > > > http://www.PatsAcres.com
> > > > http://www.RSwyers.com/ Bro's site
> > > > http://www.EKartingnews.com
> > > > http://www.CART.com
> > > > `.??.`.??.`.??.><((((o>`.??.><((((o>
> > > > `.??.><((((o>`.??.`.??.><((((o>

by **Tony Gaylor** » Fri, 03 May 2002 12:10:22

NOPE, just removed everything from the background with exception of WIN98
needed 'Explorer' and Startup.
After clicking the PRD, I get the PRD page fault

*** it.

--
_ _ _ _ _ _ _ _ _ _ _ _ _
Tony Gaylord - Vancouver, WA *USA*

http://www.racesimcentral.net/
http://www.racesimcentral.net/
http://www.racesimcentral.net/
http://www.racesimcentral.net/
http://www.racesimcentral.net/
http://www.racesimcentral.net/'s site
http://www.racesimcentral.net/
http://www.racesimcentral.net/
`.??.`.??.`.??.><((((o>`.??.><((((o>
`.??.><((((o>`.??.`.??.><((((o>

> Never mind. Worked after reboot. It really bites. Waste of time.
> Doug D

> > Just a wild guess here, but are you running any firewalling software?
> > Because the first time I ran PRD, my firewall came up and said PRD was
> > trying to send out a broadcast packet. I had to allow that and then a
> > response on a different port before it worked properly. I'm using Kerio
> > Personal Firewall, if you are using something else like Black Ice or
> > ZoneAlarm it is possible that you are getting a page fault when it tries
> > to interrupt PRD.

> > > Same here. :( Solid system, everything up to date, no problems w/
> > anything
> > > else. ERROR
> > > Doug D

> > > > Folks, whats happening here?! :) Not patting my own back here or
> > bragging
> > > > but my system is solid as a rock and have had only 1 title over a
> > year ago
> > > > give me headaches on install. When I launch, I get the dreaded
> > Invalid
> > > Page
> > > > Fault - error PRD.EXE.

> > > > ok fine, I go into setup, get a page fault there too. Like I said,
> > > > everything (drivers etc) are very much up to date and installed
> > correctly.
> > > > For sh*ts and giggles, I un-installed, D/L from (2) different
> > mirrors and
> > > > each time, same invalid page fault's.
> > > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :)

> > > > Anyone else? Any fixes here?
> > > > 130mph, 6 speed rocket :)

> > > > Tony Gaylord

> > > > --
> > > > _ _ _ _ _ _ _ _ _ _ _ _ _
> > > > Tony Gaylord - Vancouver, WA *USA*

> > > > http://www.racesimcentral.net/
> > > > http://www.racesimcentral.net/
> > > > http://www.racesimcentral.net/
> > > > http://www.racesimcentral.net/
> > > > http://www.racesimcentral.net/
> > > > http://www.racesimcentral.net/'s site
> > > > http://www.racesimcentral.net/
> > > > http://www.racesimcentral.net/
> > > > `.??.`.??.`.??.><((((o>`.??.><((((o>
> > > > `.??.><((((o>`.??.`.??.><((((o>

by **spaz** » Fri, 03 May 2002 18:07:44

Tony, please don't attach binaries in this newsgroup.

Thanks.

by **M. Mai** » Fri, 03 May 2002 20:37:25

and the point behind the 115kb photograph of something not even pertaining
to the subject is what?!

do not attach meaningless BS. I thought perhaps it was a screenshot of the
error, but no, its nothing but a waste.

by **Tony Gaylor** » Sat, 04 May 2002 10:23:19

Ehh, sorry I wasnt aware of that.
Take care,

TG

--
_ _ _ _ _ _ _ _ _ _ _ _ _
Tony Gaylord - Vancouver, WA *USA*

http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
http://www.NationalKarting.com
http://www.ShifterSafetygear.com
http://www.SharkShifter.com
http://www.PatsAcres.com
http://www.RSwyers.com/ Bro's site
http://www.EKartingnews.com
http://www.CART.com
`.??.`.??.`.??.><((((o>`.??.><((((o>
`.??.><((((o>`.??.`.??.><((((o>

> Tony, please don't attach binaries in this newsgroup.

> Thanks.

> >Folks, whats happening here?! :) Not patting my own back here or bragging
> >but my system is solid as a rock and have had only 1 title over a year
ago
> >give me headaches on install. When I launch, I get the dreaded Invalid
Page
> >Fault - error PRD.EXE.

> >ok fine, I go into setup, get a page fault there too. Like I said,
> >everything (drivers etc) are very much up to date and installed
correctly.
> >For sh*ts and giggles, I un-installed, D/L from (2) different mirrors and
> >each time, same invalid page fault's.
> >Latest Det drivers, current DX8 yadda, yadda, yadda.... :)

> >Anyone else? Any fixes here?
> >130mph, 6 speed rocket :)

> >Tony Gaylord

by **Tony Gaylor** » Sat, 04 May 2002 10:27:31

M -
Get a life man, think about it, its just a photo. No crime here, just wasnt
100% sure about posting it. A little 'off' subject if you will, sue me.

Meaningless BS? Its "REAL" racing isnt it? Maybe you should getout behind
that monitor and enjoy some real racing sometime.
And it was just a waste? Like I took a lot of time out of your day? Sorry to
have let you down, I wasnt aware that a screenshot of the error was so
meaning to you. Perhaps I could post that? *grin*

*TG*
--
_ _ _ _ _ _ _ _ _ _ _ _ _
Tony Gaylord - Vancouver, WA *USA*

http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
http://www.NationalKarting.com
http://www.ShifterSafetygear.com
http://www.SharkShifter.com
http://www.PatsAcres.com
http://www.RSwyers.com/ Bro's site
http://www.EKartingnews.com
http://www.CART.com
`.??.`.??.`.??.><((((o>`.??.><((((o>
`.??.><((((o>`.??.`.??.><((((o>

> and the point behind the 115kb photograph of something not even pertaining
> to the subject is what?!

> do not attach meaningless BS. I thought perhaps it was a screenshot of the
> error, but no, its nothing but a waste.

> > Folks, whats happening here?! :) Not patting my own back here or
bragging
> > but my system is solid as a rock and have had only 1 title over a year
ago
> > give me headaches on install. When I launch, I get the dreaded Invalid
> Page
> > Fault - error PRD.EXE.

> > ok fine, I go into setup, get a page fault there too. Like I said,
> > everything (drivers etc) are very much up to date and installed
correctly.
> > For sh*ts and giggles, I un-installed, D/L from (2) different mirrors
and
> > each time, same invalid page fault's.
> > Latest Det drivers, current DX8 yadda, yadda, yadda.... :)

> > Anyone else? Any fixes here?
> > 130mph, 6 speed rocket :)

> > Tony Gaylord

> > --
> > _ _ _ _ _ _ _ _ _ _ _ _ _
> > Tony Gaylord - Vancouver, WA *USA*

> > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
> > http://www.NationalKarting.com
> > http://www.ShifterSafetygear.com
> > http://www.SharkShifter.com
> > http://www.PatsAcres.com
> > http://www.RSwyers.com/ Bro's site
> > http://www.EKartingnews.com
> > http://www.CART.com
> > `.??.`.??.`.??.><((((o>`.??.><((((o>
> > `.??.><((((o>`.??.`.??.><((((o>

by **spaz** » Sat, 04 May 2002 11:26:42

>Get a life man, think about it, its just a photo.

plonk

by **M. Mai** » Sat, 04 May 2002 14:14:55

woooooooooooooooooooooooosh

--
M. Main

www.LordsOfAcid.com / www.ChildrenOfAcid.com
Maturation makes liars of us all.

> M -
> Get a life man, think about it, its just a photo. No crime here, just
wasnt
> 100% sure about posting it. A little 'off' subject if you will, sue me.

> Meaningless BS? Its "REAL" racing isnt it? Maybe you should getout behind
> that monitor and enjoy some real racing sometime.
> And it was just a waste? Like I took a lot of time out of your day? Sorry
to
> have let you down, I wasnt aware that a screenshot of the error was so
> meaning to you. Perhaps I could post that? *grin*

> *TG*
> --
> _ _ _ _ _ _ _ _ _ _ _ _ _
> Tony Gaylord - Vancouver, WA *USA*

> http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
> http://www.NationalKarting.com
> http://www.ShifterSafetygear.com
> http://www.SharkShifter.com
> http://www.PatsAcres.com
> http://www.RSwyers.com/ Bro's site
> http://www.EKartingnews.com
> http://www.CART.com
> `.??.`.??.`.??.><((((o>`.??.><((((o>
> `.??.><((((o>`.??.`.??.><((((o>

> > and the point behind the 115kb photograph of something not even
pertaining
> > to the subject is what?!

> > do not attach meaningless BS. I thought perhaps it was a screenshot of
the
> > error, but no, its nothing but a waste.

> > > Folks, whats happening here?! :) Not patting my own back here or
> bragging
> > > but my system is solid as a rock and have had only 1 title over a year
> ago
> > > give me headaches on install. When I launch, I get the dreaded Invalid
> > Page
> > > Fault - error PRD.EXE.

> > > ok fine, I go into setup, get a page fault there too. Like I said,
> > > everything (drivers etc) are very much up to date and installed
> correctly.
> > > For sh*ts and giggles, I un-installed, D/L from (2) different mirrors
> and
> > > each time, same invalid page fault's.
> > > Latest Det drivers, current DX8 yadda, yadda, yadda.... :)

> > > Anyone else? Any fixes here?
> > > 130mph, 6 speed rocket :)

> > > Tony Gaylord

> > > --
> > > _ _ _ _ _ _ _ _ _ _ _ _ _
> > > Tony Gaylord - Vancouver, WA *USA*

> > > http://y42.photos.yahoo.com/teampaultracy - Personal/Karting Pics
> > > http://www.NationalKarting.com
> > > http://www.ShifterSafetygear.com
> > > http://www.SharkShifter.com
> > > http://www.PatsAcres.com
> > > http://www.RSwyers.com/ Bro's site
> > > http://www.EKartingnews.com
> > > http://www.CART.com
> > > `.??.`.??.`.??.><((((o>`.??.><((((o>
> > > `.??.><((((o>`.??.`.??.><((((o>

by **M. Mai** » Sat, 04 May 2002 14:16:49

you're right, it's REAL racing, im sorry, you may want to go to
www.dictionary.com and look up the word "simulators" because, this newsgroup
pertains to SIMULATION, not REAL. you're photo, in you're post was a waste
of our time. It was pointless. Sure, we're glad you sit on a soapbox, we're
glad you race, but 115k pictures are not needed in a post to show us.