rec.autos.simulators

by **G.M.** » Sat, 05 Aug 2000 04:00:00

Hi to all,
I am an Italian Gpl fan.
I need to know the settings you use with
Guillemot Ferrari Wheel because i am no able to
configure them properly.
Here are my values:
Core.ini
Force feedbak damping: 2.0
Force feedback latency: 0.099
Max steering torque: 375.0
Controlo panel:
Overall device gain:74
Spring gain :14
Damper gain: 71
Default spring 0
Any help wolud be appreciated.
Ciao.
Giorgio

by **Marc Collin** » Sun, 06 Aug 2000 04:00:00

If you do a net news search, this topic has been covered many times and
there are varying views on what works best. To start, we need to know if
you are using USB or serial port and how fast is your CPU?

Marc.

> Hi to all,
> I am an Italian Gpl fan.
> I need to know the settings you use with
> Guillemot Ferrari Wheel because i am no able to
> configure them properly.
> Here are my values:
> Core.ini
> Force feedbak damping: 2.0
> Force feedback latency: 0.099
> Max steering torque: 375.0
> Controlo panel:
> Overall device gain:74
> Spring gain :14
> Damper gain: 71
> Default spring 0
> Any help wolud be appreciated.
> Ciao.
> Giorgio

by **G.M.** » Sun, 06 Aug 2000 04:00:00

> If you do a net news search, this topic has been covered many times and
> there are varying views on what works best. To start, we need to know if
> you are using USB or serial port and how fast is your CPU?

> Marc.

Hi Marc,
my wheel is usb connected and the cpu
is a intel 700 oc to 784.
There is not a hardware problem (i suppose).
With Gp3 the wheel is working fine.
Thanks.

by **Mats Lofkvis** » Sun, 06 Aug 2000 04:00:00

> Hi to all,
> I am an Italian Gpl fan.
> I need to know the settings you use with
> Guillemot Ferrari Wheel because i am no able to
> configure them properly.

My setup is something like:
core.ini
damping 70-100 (higher value makes weak forces stronger)
latency 0.025 (could be zero I suppose, don't notice any difference)
torque 150-250 (lower value makes forces stronger)

control panel
overall 100
spring 0 <---- IMPORTANT!! bugs show up without this one
damper 0-10 (higher values add to damping, not really needed
since the Ferrari wheel have quite a lot of it anyway)
default spring isn't used in GPL as far as I know

_
Mats Lofkvist

GPLRank +3.69

by **Marko Aaltone** » Tue, 08 Aug 2000 04:00:00

Force feedbak damping: 0.0
Force feedback latency: 0.025
Max steering torque: 200.0

Control panel:
Overall device gain:100
Spring gain :0
Damper gain: 0
Default spring 0

by **Marc Collin** » Tue, 08 Aug 2000 04:00:00

I must say that despite using and promoting similar settings to Mats, your
approach yields a very nice feeling wheel. Mats and I have tried to figure
out how to get rid of the gravel in the steering box feel and you have
managed to do that, Marko. As far as I can tell so far, the feedback itself
is as good or better than with GPL damping setting set in the 100 range.

Thanks!

Marc.

rec.autos.simulators

Guillemot Ferrari setup for GPL...

Guillemot Ferrari setup for GPL...

Guillemot Ferrari setup for GPL...

Guillemot Ferrari setup for GPL...

Guillemot Ferrari setup for GPL...

Guillemot Ferrari setup for GPL...

Guillemot Ferrari setup for GPL...