Bought SCGT about 3 hours ago. I've applied the latest patch - 1551, and the
advanced options. Split axis don't work. I remember trying the demo 'fix'
fro split axis but that never worked. I'm using a TM F1 (Nascar Pro in US?)
and and sick of having to switch when I go between that and GPL. As many
suggestions as you can provide would be a great help.
TIA
Mark
Reading, UK
Sent via Deja.com http://www.racesimcentral.net/
Share what you know. Learn what you don't.
SCGT does NOT recognize split axis with an ECCI, and until it does, these
people who put put out the software are full of it, if they say it does.
They should take lessons from Papy and get it right and get multiplayer
right. Everyone else has a better muliplayer than these guys.
jd
> When you start up the SCGT, press your pedals on.
> then SCGT will recognize your 3rd axis.
> I don't know when is the detection point,
> but I pressed both pedals on from click the start button to initial menu,
> then SCGT recognized my 3rd axis.
> It's some annoying method, but it works!
> And also it doesn't need dual axis patch.
> Is there anyone who know the better method?
> eddie
> > Before you say search on Deja, I just did and can't find anything that
works.
> > Bought SCGT about 3 hours ago. I've applied the latest patch - 1551,
and the
> > advanced options. Split axis don't work. I remember trying the demo
'fix'
> > fro split axis but that never worked. I'm using a TM F1 (Nascar Pro in
US?)
> > and and sick of having to switch when I go between that and GPL. As
many
> > suggestions as you can provide would be a great help.
> > TIA
> > Mark
> > Reading, UK
> > Sent via Deja.com http://www.deja.com/
> > Share what you know. Learn what you don't.
When you start up the SCGT, press your pedals on.
then SCGT will recognize your 3rd axis.
I don't know when is the detection point,
but I pressed both pedals on from click the start button to initial menu,
then SCGT recognized my 3rd axis.
It's some annoying method, but it works!
And also it doesn't need dual axis patch.
Is there anyone who know the better method?
eddie
> Bought SCGT about 3 hours ago. I've applied the latest patch - 1551, and the
> advanced options. Split axis don't work. I remember trying the demo 'fix'
> fro split axis but that never worked. I'm using a TM F1 (Nascar Pro in US?)
> and and sick of having to switch when I go between that and GPL. As many
> suggestions as you can provide would be a great help.
> TIA
> Mark
> Reading, UK
> Sent via Deja.com http://www.deja.com/
> Share what you know. Learn what you don't.
Well, whaddaya know, it works!! Actually, I must only press the brake pedal
- if I press both on startup my accellerator isn't recognised!!!
It may not be an ideal solution, but it's a hell of a lot better than groping
on the floor to flick a switch then setting it up in TM Pro Panel. And then
forgetting to set it back when I head into GPL...
Cheers
Mark
Reading, UK
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.
Well Papyrus has it so right that I can't play N1999 multiplayer with my MSFF
wheel. How about they take lessons from someone else?
daxe
>SCGT does NOT recognize split axis with an ECCI, and until it does, these
>people who put put out the software are full of it, if they say it does.
>They should take lessons from Papy and get it right and get multiplayer
>right. Everyone else has a better muliplayer than these guys.
>jd
>> When you start up the SCGT, press your pedals on.
>> then SCGT will recognize your 3rd axis.
>> I don't know when is the detection point,
>> but I pressed both pedals on from click the start button to initial menu,
>> then SCGT recognized my 3rd axis.
>> It's some annoying method, but it works!
>> And also it doesn't need dual axis patch.
>> Is there anyone who know the better method?
>> eddie
>> > Before you say search on Deja, I just did and can't find anything that
>works.
>> > Bought SCGT about 3 hours ago. I've applied the latest patch - 1551,
>and the
>> > advanced options. Split axis don't work. I remember trying the demo
>'fix'
>> > fro split axis but that never worked. I'm using a TM F1 (Nascar Pro in
>US?)
>> > and and sick of having to switch when I go between that and GPL. As
>many
>> > suggestions as you can provide would be a great help.
>> > TIA
>> > Mark
>> > Reading, UK
>> > Sent via Deja.com http://www.deja.com/
>> > Share what you know. Learn what you don't.
Your the first, ive heard from.......You can go to GPL and run it split
axis, no redo the calibrate and then go to SCGT, load and go, no
recalibrate?.....Like you should be able to do BTW,
What do you mean my setup.....whats to setup?
jd
> >Well,
> >SCGT does NOT recognize split axis with an ECCI, and until it does, these
> >people who put put out the software are full of it, if they say it does.
> >They should take lessons from Papy and get it right and get multiplayer
> >right. Everyone else has a better muliplayer than these guys.
> >jd
> >> When you start up the SCGT, press your pedals on.
> >> then SCGT will recognize your 3rd axis.
> >> I don't know when is the detection point,
> >> but I pressed both pedals on from click the start button to initial
menu,
> >> then SCGT recognized my 3rd axis.
> >> It's some annoying method, but it works!
> >> And also it doesn't need dual axis patch.
> >> Is there anyone who know the better method?
> >> eddie
> >> > Before you say search on Deja, I just did and can't find anything
that
> >works.
> >> > Bought SCGT about 3 hours ago. I've applied the latest patch - 1551,
> >and the
> >> > advanced options. Split axis don't work. I remember trying the demo
> >'fix'
> >> > fro split axis but that never worked. I'm using a TM F1 (Nascar Pro
in
> >US?)
> >> > and and sick of having to switch when I go between that and GPL. As
> >many
> >> > suggestions as you can provide would be a great help.
> >> > TIA
> >> > Mark
> >> > Reading, UK
> >> > Sent via Deja.com http://www.deja.com/
> >> > Share what you know. Learn what you don't.
I have an ACM card, not the PDPI. Don't c why that would make a diff, but
who knows.
jd
> >Well,
> >SCGT does NOT recognize split axis with an ECCI, and until it does, these
> >people who put put out the software are full of it, if they say it does.
> >They should take lessons from Papy and get it right and get multiplayer
> >right. Everyone else has a better muliplayer than these guys.
> >jd
> >> When you start up the SCGT, press your pedals on.
> >> then SCGT will recognize your 3rd axis.
> >> I don't know when is the detection point,
> >> but I pressed both pedals on from click the start button to initial
menu,
> >> then SCGT recognized my 3rd axis.
> >> It's some annoying method, but it works!
> >> And also it doesn't need dual axis patch.
> >> Is there anyone who know the better method?
> >> eddie
> >> > Before you say search on Deja, I just did and can't find anything
that
> >works.
> >> > Bought SCGT about 3 hours ago. I've applied the latest patch - 1551,
> >and the
> >> > advanced options. Split axis don't work. I remember trying the demo
> >'fix'
> >> > fro split axis but that never worked. I'm using a TM F1 (Nascar Pro
in
> >US?)
> >> > and and sick of having to switch when I go between that and GPL. As
> >many
> >> > suggestions as you can provide would be a great help.
> >> > TIA
> >> > Mark
> >> > Reading, UK
> >> > Sent via Deja.com http://www.deja.com/
> >> > Share what you know. Learn what you don't.
