thanks.
These should work fine with your Diamond card...
-- Sjon
> thanks.
Good Luck
David C
> Good Luck
> David C
> Thanks to everyone who replied... but still no luck. These reference drivers
> have problems with my card. Bad problems. I only get 2 resolutions, 640x480
> (up to 32bit color) and 800x600 (up to 16 color). Totaly unacceptable when I'm
> on a 17" and I don't use it just for this game. Any idea? I've reinstalled
> DX7a... still nothing. please help.
> > Goto www.3dfxgamers.com , goto the drivers section and download the latest
> > "reference drivers" for the Voodoo Banshee. They'll work on your card, don't
> > worry.
> > Good Luck
> > David C
I have similar Banshee problems. I'm really not sure what caused it, but at a
certain point in time, even some formerly working D3D titles starting crapping
out (example: X-Wing Alliance). Might have been when I "upgraded" to DX7.
I tried everything including DXuninstall and eventually a new HD with a new
Win95 boot. But then I still had probs with DX6. Same as you, games would
lock up after a few seconds up to a minute or so. Since then, I bought a
V3-3000 and all is well. So, I don't know what to tell you except I share
your pain. Oh, I also tried every driver imaginable, including the latest ref
drivers.
>thanks.
I had this happen to me too a coupla versions back with the reference drivers.
If I recall correctly it was because the monitor wasn't specified correctly.
Try correcting this and see if it helps.
HH
>> Goto www.3dfxgamers.com , goto the drivers section and download the latest
>> "reference drivers" for the Voodoo Banshee. They'll work on your card,
don't
>> worry.
>> Good Luck
>> David C
DjFIL
> I had this happen to me too a coupla versions back with the reference drivers.
> If I recall correctly it was because the monitor wasn't specified correctly.
> Try correcting this and see if it helps.
> HH
> >Thanks to everyone who replied... but still no luck. These reference drivers
> >have problems with my card. Bad problems. I only get 2 resolutions, 640x480
> >(up to 32bit color) and 800x600 (up to 16 color). Totaly unacceptable when
> I'm
> >on a 17" and I don't use it just for this game. Any idea? I've reinstalled
> >DX7a... still nothing. please help.
> >> Goto www.3dfxgamers.com , goto the drivers section and download the latest
> >> "reference drivers" for the Voodoo Banshee. They'll work on your card,
> don't
> >> worry.
> >> Good Luck
> >> David C
really does work BTW, i had thought for ages that 'plug and play
monitor' should work - and that there was somthing wrong with my
system (using creative blaster TNT), when i eventually got round to
finding a daytek monitor.inf all my problems melted away... (well at
least i got the right resolutions available...)
remember it might not be under drivers on the web page because
strictly its not a driver!
good luck
col.
>DjFIL
>> I had this happen to me too a coupla versions back with the reference drivers.
>> If I recall correctly it was because the monitor wasn't specified correctly.
>> Try correcting this and see if it helps.
>> HH
>> >Thanks to everyone who replied... but still no luck. These reference drivers
>> >have problems with my card. Bad problems. I only get 2 resolutions, 640x480
>> >(up to 32bit color) and 800x600 (up to 16 color). Totaly unacceptable when
>> I'm
>> >on a 17" and I don't use it just for this game. Any idea? I've reinstalled
>> >DX7a... still nothing. please help.
>> >> Goto www.3dfxgamers.com , goto the drivers section and download the latest
>> >> "reference drivers" for the Voodoo Banshee. They'll work on your card,
>> don't
>> >> worry.
>> >> Good Luck
>> >> David C
