Cz,
http://www.racesimcentral.net/
...but seem gone now. Basically, you have to negotiate the Registry until
you find a string of hex numbers that pertain to the pot values (like 0000
0000 8B repeated as many times as you've got axes), and then edit the last
two digits until you get full deflection on a calibration util like TM's
ProPanel. Then you change all the others to match (assuming all the pots
have the same resistance). You might find a reprint of this article
somewhere under controllers or PDPI.
--Steve
> Czech :) I like that.
> Please don't leave me*** like that. Details man ! Details!
> On Thu, 22 Mar 2001 02:52:39 GMT, "Stephen Smith"
> >Czech,
> >You've gotta edit the Registry to get full calibration from a non-U pot.
It
> >can be done...but make sure you back up the original.
> >--Steve
> >> Ok, I followed the instructions from the web page as directed to
> >> rewire my CH pedals to work with my Logitech wheel. Now when I
> >> calibrate the pedals, the indicator only moves to half of the allowed
> >> travel. The instructions did not indicate as to whether or not to use
> >> the pots from the CH pedals, or the Logitech so, I tried both. No
> >> difference was seen between the two. It calibrates smooth, but only
> >> to half scale. I have checked the deadzone with dxtweak and
> >> everything is at zero. This setup is useable but, I think it should
> >> be better. Any ideas?
