pedals) in GPL without cutting any wires? Anybody know how to set this up?
Many thanks for any and all responses!
Many thanks for any and all responses!
You can easily remove the wiring harness from the Logitech pedals, the wires
just plug in, and replace the wiring in the CH pedals with it. Make short
extension wires using the same type connectors used on the pots and wiring
harness so you don't have to cut into the LWFF wires. The whole process
takes about 30 minutes.
There is a more detailed explaination on Alison's site. Go to Help,
Controllers, Reader Reports. http://simracing.com/alison/gpl/
don
[|]-(_)-[|]
- Plug the ch pedals in the normal joystick gameport
- the pedals only work if something is attached to it, so attach an
old wheel or any old joystick to the pedals (attach it on the joystick
connector ofcourse)
- in joystick properties make a custom joystick with 4 axes and
calibrate.
- insert the lwff to the usb port
- in joystick properties select it as a second joystick
Hope this helps, it's very simple, the only thing that caused problems
first was the fact that there has to be a joystick connected to the
pedals. I didn't know that first.
Andre
On Sat, 24 Jul 1999 10:02:41 -0400, "Chester Raffoon"
>Many thanks for any and all responses!
Kevin Caldwell
Calgary, Canada
Andre
>Kevin Caldwell
>Calgary, Canada
>> Hope this helps, it's very simple, the only thing that caused problems
>> first was the fact that there has to be a joystick connected to the
>> pedals. I didn't know that first.
>> Andre
The pedals don't work too well in the Window's test or calibrate window, but
I ignore that, and just calibrate in GPL. Works for me, anyway!
Kevin
If you do it, like the other explain in the gameport, you will to use them only
in GPL!!
Bye Coco
> >Many thanks for any and all responses!
> You can easily remove the wiring harness from the Logitech pedals, the wires
> just plug in, and replace the wiring in the CH pedals with it. Make short
> extension wires using the same type connectors used on the pots and wiring
> harness so you don't have to cut into the LWFF wires. The whole process
> takes about 30 minutes.
> There is a more detailed explaination on Alison's site. Go to Help,
> Controllers, Reader Reports. http://simracing.com/alison/gpl/
> don
> [|]-(_)-[|]
>If you do it, like the other explain in the gameport, you will to use them
only
>in GPL!!
>> >Can I use the Logitech FF wheel and CH pedals (instead of the Logitech
>> >pedals) in GPL without cutting any wires? Anybody know how to set this
up?
>> >Many thanks for any and all responses!
>> You can easily remove the wiring harness from the Logitech pedals, the
wires
>> just plug in, and replace the wiring in the CH pedals with it. Make short
>> extension wires using the same type connectors used on the pots and
wiring
>> harness so you don't have to cut into the LWFF wires. The whole process
>> takes about 30 minutes.
>> There is a more detailed explaination on Alison's site. Go to Help,
>> Controllers, Reader Reports. http://simracing.com/alison/gpl/
>> don
>> [|]-(_)-[|]