rec.autos.simulators

by **Preferred Custome** » Wed, 07 May 1997 04:00:00

I loaded the patch and now my cross weight is all the way to the right, but
says zero. I can't put any cross weight in now, only take it way. Is
there a fix for this?

Sean Higgins

Higgy
--
http://www.racesimcentral.net/~higgy/

by **Michael E. Carve** » Wed, 07 May 1997 04:00:00

: I loaded the patch and now my cross weight is all the way to the right, but
: says zero. I can't put any cross weight in now, only take it way. Is
: there a fix for this?

I recall a related post that said you can pull into the pits and have
your pit crew adjust the cross-weight. Then exit to the garage and save
the setup.

--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=

by **Jim Sokolo** » Wed, 07 May 1997 04:00:00

Did your layout.dat file get patched? (It should have.) If you had a
modified layout.dat, it wouldn't get patched, and could cause the
above problem...

Check to be sure...

---Jim Sokoloff

by **Paul Carillon Jr** » Wed, 07 May 1997 04:00:00

> >I loaded the patch and now my cross weight is all the way to the right, but
> >says zero. I can't put any cross weight in now, only take it way. Is
> >there a fix for this?

> Did your layout.dat file get patched? (It should have.) If you had a
> modified layout.dat, it wouldn't get patched, and could cause the
> above problem...

> Check to be sure...

> ---Jim Sokoloff

Yes Jim is right on this.I recieved a Layout.dat file from a freind who
made some changes to the dash for me and when i patched it i only had
negative cross weight setting adjustments.With my original layout file
which i never deleted or over wrought i had no problems after i patched
it so i iwould say use the original Layout patch it then change what
ever you have changed in it now.

Paul

by **ymenar** » Wed, 07 May 1997 04:00:00

> > >I loaded the patch and now my cross weight is all the way to the right, but
> > >says zero. I can't put any cross weight in now, only take it way. Is
> > >there a fix for this?

> > Did your layout.dat file get patched? (It should have.) If you had a
> > modified layout.dat, it wouldn't get patched, and could cause the
> > above problem...

> > Check to be sure...

> > ---Jim Sokoloff

> Yes Jim is right on this.I recieved a Layout.dat file from a freind who
> made some changes to the dash for me and when i patched it i only had
> negative cross weight setting adjustments.With my original layout file
> which i never deleted or over wrought i had no problems after i patched
> it so i iwould say use the original Layout patch it then change what
> ever you have changed in it now.

> Paul

If you have layout.dat changed just unpack it and take the file that you
want. After go into the N2 CD_ROM and put a new layout.dat in your N2
directory. Now apply the patch and after unpack the updated layout.dat
and reput the files you saved before. So now you have (per exemple)
your modified***pit but with the patched layout.dat It's don't sounds
maybe clear but remember that I speak 99.9% of the time in French.
English is my second language. In Quebec it's a bilingual province
(country!vive le Qubec libre) and I don't practice my English often.
So if I'm not clear just reply to my post. Thanks a lot,

Good race at the Brickyard,

SPEED- Cars, WC, BGN, Trucks, IROC, utilities and more...
SPEED- http://www.racesimcentral.net/~speed

|! Go Rubens Barrichello, Jacques Villeneuve, !|
|! Patrick Carpentier,Jeff Gordon and Greg Moore!!! !|
|! May the force be with you, always!! !|
|! Que la force soit avec toi, jamais!! !|
|! Excuse me for my poor English(I'm French speaking) !|

by **Charlie Heat** » Thu, 08 May 1997 04:00:00

>I loaded the patch and now my cross weight is all the way to the right, but
>says zero. I can't put any cross weight in now, only take it way. Is
>there a fix for this?

>Sean Higgins

>Higgy
>--
>http://www.teleport.com/~higgy/

I've heard from of a couple other people who I believe had modified
LAYOUT.DAT who have experienced this problem. I suspect if you do a clean
install from CD and then apply the patch, it will be resolved.

Charlie Heath / Papyrus

by **Preferred Custome** » Thu, 08 May 1997 04:00:00

People keep telling me about a modified layout.dat I haven't modified any
file for N2. Don't know how first of and second what for? <G>

Sean Higgins

> >I loaded the patch and now my cross weight is all the way to the right,
but
> >says zero. I can't put any cross weight in now, only take it way. Is
> >there a fix for this?

> >Sean Higgins

> >Higgy
> >--
> >http://www.teleport.com/~higgy/

> I've heard from of a couple other people who I believe had modified
> LAYOUT.DAT who have experienced this problem. I suspect if you do a
clean
> install from CD and then apply the patch, it will be resolved.

> Charlie Heath / Papyrus

rec.autos.simulators

N2 patch (cross weight)

N2 patch (cross weight)

N2 patch (cross weight)

N2 patch (cross weight)

N2 patch (cross weight)

N2 patch (cross weight)

N2 patch (cross weight)

N2 patch (cross weight)