Because I must have some sort of ***ic tendencies, given the problems
I had with drivers for this wheel already, I tried installing the new 25.14
drivers...figuring there may have been some improvement between version 1
and 25. :)
Installed perfectly. Detected wheel perfectly. Shows as "OK" in Control
Panel when wheel is on. No traces of old wheel in there.
As soon as I hit Properties to go set-up the wheel (split axis, e.g.), the
following message appears: "Error: Contact with the device has been lost.
Please ensure that the power and communications cables are attached."
Turn off wheel and it disappears from the CP. Turn wheel back on and it
reappears. Try Properties again and get the same message.
Uninstall TM 25.14. Run the reg. cleaning utility from the original disk.
Re-install 25.14. Same thing.
Before I just go back to 1.23, the only version of drivers that has ever
worked properly on this computer for this wheel, do you have any
suggestions?
Thanks,
Marc
> Some of the thrustmaster sites seem to have a glitch which makes it
> impossible to select the correct wheel in order to get the right drivers.
> Use the Italian site. http://www.racesimcentral.net/
> Click on "drivers" under "Supporto" in the top middle of the page.
> Then choose "volanti" and "go".
> Then "Force feedback racing wheel".
> You'll see the 25.14 drivers for XP. Split axis works perfectly for N2002,
> F12002, and LFS.
> David G Fisher
> > I don't see those on the Guillemot site. They seem to have 2.3.3 with a
> > file name that suggests a version 2.3.6e. Where do you get the
> 2.5.14.0's?
> > Split axis works for sure?
> > Thanks,
> > Marc
> > > 2.5.14.0 drivers work perfect for me with XP in N2002 and F12002.
Don't
> > now
> > > about GPL thoguh.
> > > David G Fisher
> > > > Any problems with this combo? I think it's the only device I own
that
> > > might
> > > > have a problem with XP.
> > > > I use the 1.23 drivers in 98SE. Could not use the newer updated
> > > > drivers--totally screwed the FFB and other problems. I don't use a
> > > > profiler, so I am only interested in proper FFB and split axis
pedals.
> > > > Looks like the only driver available for XP is the "new" one that
> didn't
> > > > work worth a ***in GPL or any other sim. I use.
> > > > Thanks for any advice.
> > > > Marc
> > > > --
***************************************************************************
*
> > > > Marc Collins
> > > > Your mouse has moved. Windows must be restarted for the change
> > > > to take effect. Reboot now?
