Jesse aka OutlawJr on Ten
Just a shot in the dark, but can't you use the generic modem drivers
as supplied with Win 9x?
Remco
If the commands are not in your modem's literature, you may find it through
online support or on a tech hotline for your modem's maker.
>Just a shot in the dark, but can't you use the generic modem drivers
>as supplied with Win 9x?
>Remco
>>I was hoping someone could tell me how to set my v.90 modem to run at
19,200
>>with a command in the extra settings field. I have a Phoebe pci fax/data
>>modem with v.90 and can't set it any lower than 28,800. I have tried to
use
>>the commands that are on the manual but can't get it to work properly.
When
>>I used my old generic modem(isa) I had it set to 19,200 and seldomly had
>>problems on Ten. With my new modem ,I'm lucky to get an ok(blue flag)
>>connection. Any help would be greatly appreciated, Thanks
V.90 modems have S-Registers that control the minimum and maximum
connect rates. You will have to look in the manual for right S-Reg's
and set them.
If they are not in the manual, check their web site. Sometimes
manufacturers put the really geeky stuff on their web sites instead of
putting it in the manuals, where folks can get into trouble with the
info :)
-Larry
