Doesn't that tweak then apply to all controllers? I'm concerned that I
might mess up some of my flight sims by doing that.
x-no-archive: yes
I'll repost this _again_ shall I? Doesen't anyone ever check the
archives?
=-=-=-=-=-=-
I have an MSFF gameport version, but I'm sure this will work for any
other controllers with the same problem.
I have set the pedals to split axes, but then F1 2001 has a huge
deadzone on the pedals - the wheel is fine. The pedals don't do anything
until they are 50% depressed.
Well, I say deadzone, but actually it's not. I used the deadzone tweaker
and it made no difference. Anyway, if it was a deadzone problem, why is
the wheel OK?
I ran DXTweak, and found that the pedals sit at a value of 63, and this
reduces to 0 as they are pressed.
After a bit of fiddling, I adjusted the centre value to be 62, and the
pedals now work perfectly over their entire range.
So, the rule seems to be: set the center value for each pedal to be one
value away from the value you get when the pedals are not pressed. I.e.
if the range is 0 -> 100, set the centre at 1, if it's 63 -> 0, set the
centre to 62.
=-=-=-=-=-=-
R.
message
> > On Fri, 1 Mar 2002 15:09:51 -0000, "Ashley McConnell"
> > >Hi Folks,
> > >I have just got an older ActLabs wheel via ebay. I cant seem to
get it
> to
> > >work properly with F1 2001. The wheel works ok, with pretty good
FF.
> The
> > >accelerator works fine, with a fairly variable range. But the
brakes,
> eeek!
> > >I press the brake and I get hardly anything at all then about half
way
> down
> > >the travel I get FULL brakes. Anyone know whats going on? I have
tried
> > >several different sensitivity settings and nothing seems to work.
As
> > >always, it works perfectly in GPL (although I am not used to it at
all
> yet).
> > >Thanks for the help
> > >Ash
> > I have the same problem Ash and no matter what I tried, I couldn't
get
> > rid of the major deadzone. People with different wheels have this
> > problem (I with my Momo, DGF with his Guillemot, you with the ACT)
so
> > I think we can state by now that it's a B-U-G in F1 2001.
> > The only solution is to set your pedals to single axis which sucks
:-/
> > Andre
> Bah, it worked pretty well with my MSFF, I may try to put both on and
> attempt that, Its a pity :(. I see there is a job at ISI going,
perhaps
> i'll apply and fix it myself :)
> Ash
