rec.autos.simulators

by **Bow-T** » Fri, 12 Apr 1996 04:00:00

How do you adjust the spring on the T1 by Trustmaster? I have the T1 and
I need to adjust it real bad. Now if I want to turn just a little bit I
have to turn the wheel two or three times all the way arond.

E-mail me and tell me how to adjust the spring.

by **Eldred Picke** » Sat, 13 Apr 1996 04:00:00

>Subject: T1 springs adjust?
>Date: 11 Apr 1996 23:38:17 GMT
>How do you adjust the spring on the T1 by Trustmaster? I have the T1 and
>I need to adjust it real bad. Now if I want to turn just a little bit I
>have to turn the wheel two or three times all the way arond.
>E-mail me and tell me how to adjust the spring.

I started to suggest that you can set the sensitivity in the specific program,
then I re-read your message. If the wheel turns all the way around, it sounds
like it's broken. There's supposed to be a physical stop when you turn. If
the thing's still under warranty (even if it's not) call t-master and ask them
about it. They're pretty good at supporting their customers....
Hope you get it fixed...
Eldred

I am NOT paranoid. And why are you always watching me?!?
Eldred Pickett

by **Dan Lambrigh** » Sun, 14 Apr 1996 04:00:00

> How do you adjust the spring on the T1 by Trustmaster? I have the T1 and
> I need to adjust it real bad. Now if I want to turn just a little bit I
> have to turn the wheel two or three times all the way arond.

> E-mail me and tell me how to adjust the spring.

Your wheel is not working properly. The wheel cannot turn around more
than about 3/4 of a revolution. I had a similar problem once with my T1.
Seems the bolt holding the wheel to the shaft had backed it's way out. I
would guess you have a similar problem, or something is broken inside.

Open it up, check it out! I you can remove 6 screws, you can work on
your T1.