rec.autos.simulators

T2 and GP2

@sca

T2 and GP2

by @sca » Mon, 07 Oct 1996 04:00:00

Hi,

I have a problem with my T2 and gp2.
Normaly you accelarate with the right pedal and brake with the left
pedal. But in GP2 the control is switched.
Is there a solution to this problem?

TIA

Oscar Tasseron
Holland

Jimik

T2 and GP2

by Jimik » Mon, 07 Oct 1996 04:00:00

Try reversing the order that you calibrate, accel/brake or brake/accel.
I had the same problem.
Good Luck

> Hi,

> I have a problem with my T2 and gp2.
> Normaly you accelarate with the right pedal and brake with the left
> pedal. But in GP2 the control is switched.
> Is there a solution to this problem?

> TIA

> Oscar Tasseron
> Holland


Tim Ha

T2 and GP2

by Tim Ha » Tue, 08 Oct 1996 04:00:00


>Hi,

>I have a problem with my T2 and gp2.
>Normaly you accelarate with the right pedal and brake with the left
>pedal. But in GP2 the control is switched.
>Is there a solution to this problem?

>TIA

>Oscar Tasseron
>Holland


Go to Control Method, then Advanced Menu, and then check the box that
says 'Control Driven Calibration'.  It will then prompt you to steer,
accelerate, brake, etc. and you'll be set.

Tim

Rene van Lobbereg

T2 and GP2

by Rene van Lobbereg » Wed, 09 Oct 1996 04:00:00


> Hi,

> I have a problem with my T2 and gp2.
> Normaly you accelarate with the right pedal and brake with the left
> pedal. But in GP2 the control is switched.
> Is there a solution to this problem?

> TIA

> Oscar Tasseron
> Holland


It might be your looking at where the red dot goes while calibrating.
When GP2 askes for full left, use the left pedal (brake), the red dot
will then go to the right.
When GP2 askes for full right, step on the throttle (right) and the dot
will go left.

--
*****************************
*  Dreammaster rules again  *

* When Dream And Day Unite  *
*****************************
Windows.....brings you yesterdays speed today.
       .....the choice of a brainwashed generation.

Andrew Rober

T2 and GP2

by Andrew Rober » Wed, 09 Oct 1996 04:00:00


>Hi,
>I have a problem with my T2 and gp2.
>Normaly you accelarate with the right pedal and brake with the left
>pedal. But in GP2 the control is switched.
>Is there a solution to this problem?

yup there is.  When asked to calibrate the pedals just push the pedals
in a different order.  EG. instead of pushing brake right, push it for
the left axis.  Get it???  It worked for me anyway.

<<<<<<<<<<Visit My GP2 Page>>>>>>>>>>
<<<<Setups, Hotlaps, utils etc...>>>>
<http://www.nethosting.com/~andyrobe>
<<<<<<<<<<<<<Do it now!!>>>>>>>>>>>>>


1. GP2 GP2 GP2 GP2 GP2 GP2 GP2 GP2 GP2 GP2 GP2 GP2 GP2

2. Gearing Up T2 For Gp2

3. Updating T2 for GP2

4. GP2: T2 buttons

5. T2 setup in GP2

6. T2 Calibration in GP2, Help!!

7. T2 in GP2

8. T2 in GP2, one joy port only?

9. T2 steering wheel for gp2

rec.autos.simulators is a usenet newsgroup formed in December, 1993. As this group was always unmoderated there may be some spam or off topic articles included. Some links do point back to racesimcentral.net as we could not validate the original address. Please report any pages that you believe warrant deletion from this archive (include the link in your email). RaceSimCentral.net is in no way responsible and does not endorse any of the content herein.