Slot
Yes, the pedals will loosen up. Unfortunately, to 'naturally' do so
took a few weeks on my end. Or the equivalent of 1 lap around the
'ring' for me in GPL <VBG> ;)
You can also try using a very small amount of non-spray lithium grease
if you have access to some.
I don't have access to my core.ini or anything at the moment, but I am
using the setting of 100 for the FF effect and I have my Force RS set
with "40" in the 'spring' setup and the 'always use' box checked.
Just my personal preference.
Good luck.
Scott
PA-Scott
Powersims.com
--
Scott B. Husted
ICQ# 4395450
Raymond
ACT LABS
On Wed, 22 Dec 1999 22:33:32 -0700, "Song Uk Jang"
Cheers,
Shumi
http://www.rs2league.com
> Raymond
> ACT LABS
> On Wed, 22 Dec 1999 22:33:32 -0700, "Song Uk Jang"
> >Hi guys
> >I just purchased a actlabs' force rs and recived it today.
> >despite many of your opinon on the pedals they are very sticky and
> >impossible for me to use them for GPL
> >Will they losen up? if so how long would it take?
> >also please post your core.ini setting and gain setting
> Raymond
> ACT LABS
Cheers,
Shumi
http://www.racesimcentral.net/
> Cheers,
> Shumi
> http://www.racesimcentral.net/
> > Hello,
> > I was going to answer this one, but it looks like the other fellas
> > have done a good enough job. They should work in tech support here.
> > :)
> > My pedals werer fine, but I have heard of people using a bit of white
> > grease to great success.
> > Raymond
> > ACT LABS
> > On Wed, 22 Dec 1999 22:33:32 -0700, "Song Uk Jang"
> > >Hi guys
> > >I just purchased a actlabs' force rs and recived it today.
> > >despite many of your opinon on the pedals they are very sticky and
> > >impossible for me to use them for GPL
> > >Will they losen up? if so how long would it take?
> > >also please post your core.ini setting and gain setting
> > Raymond
> > ACT LABS
