rec.autos.simulators

TM Pro Digital 2--now what did I do?

Dave Henri

TM Pro Digital 2--now what did I do?

by Dave Henri » Sun, 17 Jun 2001 14:41:51

  I have re-installed windows...and re-installed the TM Thrustmapper
software for the Pro Digital 2 wheel.  It looks like it's running fine.
But....I can't get the sims to recognize the split axis.  The Thrustmapper
shows the split but the control panel *** options only shows a two axis
setup.  AND...the wheel/pedal combo is shown on device #2 and I cannot get
it assigned to device #1.  Even tho windows shows the #1 slot to be empty,
when I try and move the wheel from #2 to #1 I get an error message which
says the #1 space is occupied.
  No other joysticks or wheels are connected at this time.  although I do
have some Logitech drivers on the system, they are not active and the TM
wheel worked fine before I messed with everything.
  I beleive I have the latest TM thrustmapper utility..v1.33 and the small
file that 'supposedly' fixes the autolauncher....
dave henrie
David No

TM Pro Digital 2--now what did I do?

by David No » Mon, 18 Jun 2001 05:51:20

Boot into Safe Mode and see if your previous wheel is still listed in Device
Mgr. I had a similar problem about a year ago (wheel not shown on device
1)and that turned out to be the problem.

DN


Dave Henri

TM Pro Digital 2--now what did I do?

by Dave Henri » Mon, 18 Jun 2001 16:59:02

  I found it after sleeping on the problem...I just had to remove the
usb plug...reboot, and reinstall the usb plug from the wheel. Then
everything got assigned to the proper place and started working.  My ISP
is giving me fits tho...I am going nuts trying to iron out the
bugs...thanks for the help.
dave henrie

> Boot into Safe Mode and see if your previous wheel is still listed in Device
> Mgr. I had a similar problem about a year ago (wheel not shown on device
> 1)and that turned out to be the problem.

> DN



> >   I have re-installed windows...and re-installed the TM Thrustmapper
> > software for the Pro Digital 2 wheel.  It looks like it's running fine.
> > But....I can't get the sims to recognize the split axis.  The Thrustmapper
> > shows the split but the control panel *** options only shows a two axis
> > setup.  AND...the wheel/pedal combo is shown on device #2 and I cannot get
> > it assigned to device #1.  Even tho windows shows the #1 slot to be empty,
> > when I try and move the wheel from #2 to #1 I get an error message which
> > says the #1 space is occupied.
> >   No other joysticks or wheels are connected at this time.  although I do
> > have some Logitech drivers on the system, they are not active and the TM
> > wheel worked fine before I messed with everything.
> >   I beleive I have the latest TM thrustmapper utility..v1.33 and the small
> > file that 'supposedly' fixes the autolauncher....
> > dave henrie


1. nostalga and the days of DOS games nostalgia and the days of DOS games nostalgia and the days of DOS games nostalgia and the days of DOS games

2. Nascar Pro Digital vs Pro Digital 2, Which is better?

3. Differences between Thrustmaster Nascar Pro Digital and Pro Digital 2?

4. Pro Digital vs. Pro Digital 2?

5. I've done this before, and I'm doing it again...

6. '83 GTI A/C conversion -- have you done it/had it done?

7. Dos 7 versus Dos 6.22 for running Sims

8. sierra could have done good if they had done the following

9. Imola: anyone done/doing a pre-chicane version for GTR2002/F12002?

rec.autos.simulators is a usenet newsgroup formed in December, 1993. As this group was always unmoderated there may be some spam or off topic articles included. Some links do point back to racesimcentral.net as we could not validate the original address. Please report any pages that you believe warrant deletion from this archive (include the link in your email). RaceSimCentral.net is in no way responsible and does not endorse any of the content herein.