rec.autos.simulators

GP2 Anyone setup CH Pro Pedals Yet?

Bahn

GP2 Anyone setup CH Pro Pedals Yet?

by Bahn » Wed, 24 Jul 1996 04:00:00

Whatta F*%#ing great sim! The driving model is best yet!

But my damn pro pedals don't work! I've tried about every way to configure
them, but  nothing seems to work. Any other Pro Pedal users out there figure
this out? I'd really like to know :)

Sean Ormon

GP2 Anyone setup CH Pro Pedals Yet?

by Sean Ormon » Thu, 25 Jul 1996 04:00:00


> ...
> But my damn pro pedals don't work!

Well, I should've known better than to post without reading the
FM...page 15, in particular!  In short, you need to check the "Control
Driven Calibration" option prior to calibrating...works perfectly!  
Please ignore my earlier post.

Sean

Sean Ormon

GP2 Anyone setup CH Pro Pedals Yet?

by Sean Ormon » Thu, 25 Jul 1996 04:00:00


> ...
> But my damn pro pedals don't work!

I've been having the same problem and I hate to say it, but I don't see
any easy solutions...  As complex as the control setup is, you'd think
they would have covered all possible configurations!  So, do I shelf it
and wait for a patch, reinstall my T1 pedals (I seriously hated those
things), or waste a call to tech support?  Decisions, decisions...  If
anyone comes up with a solution please pass it along.

Sean

Logichip Unit Tru

GP2 Anyone setup CH Pro Pedals Yet?

by Logichip Unit Tru » Fri, 26 Jul 1996 04:00:00



>> ...
>> But my damn pro pedals don't work!

>I've been having the same problem and I hate to say it, but I don't see
>any easy solutions...  As complex as the control setup is, you'd think
>they would have covered all possible configurations!  So, do I shelf it
>and wait for a patch, reinstall my T1 pedals (I seriously hated those
>things), or waste a call to tech support?  Decisions, decisions...  If
>anyone comes up with a solution please pass it along.

>Sean

After some frustration, I managed to set up my CH Pro pedals just fine.
From memory, I think you have to select the "control driven calibration"
button on the advanced control methods screen and it then lets you calibrate
it for throttle and brake. (I'm assuming that's your problem).

Andrew

Spectrum HoloByte/MicroProse suppo

GP2 Anyone setup CH Pro Pedals Yet?

by Spectrum HoloByte/MicroProse suppo » Sat, 27 Jul 1996 04:00:00


>Whatta F*%#ing great sim! The driving model is best yet!
>But my damn pro pedals don't work! I've tried about every way to configure
>them, but  nothing seems to work. Any other Pro Pedal users out there figure
>this out? I'd really like to know :)

Make sure you select "Control Driven Calibration" and they should
work. If you are still experiencing problems, let me know.

Best,
Gabriel/Spectrum HoloByte & MicroProse support
Official GP2 page http://www.microprose.com/gp2/

Grin

GP2 Anyone setup CH Pro Pedals Yet?

by Grin » Sat, 27 Jul 1996 04:00:00


>Whatta F*%#ing great sim! The driving model is best yet!
>But my damn pro pedals don't work! I've tried about every way to configure
>them, but  nothing seems to work. Any other Pro Pedal users out there figure
>this out? I'd really like to know :)

I had quite a miserable time getting mine to work but eventually I got
it. Here's what I think I did.  I choose "control driven calibration"
then I set my Accelaeration to be "joystick B vert." and brake to
"joystick B horz.".  Then I calibrated and after about the 4th time
that I tried to calibrate, it woked.  I have saved the file so if you
need it I can e-mail you my setup I think.

hope this helps

Mike Lewis


James_Kingdo

GP2 Anyone setup CH Pro Pedals Yet?

by James_Kingdo » Sat, 27 Jul 1996 04:00:00




> >> ...
> >> But my damn pro pedals don't work!

> >I've been having the same problem and I hate to say it, but I don't see
> >any easy solutions...  As complex as the control setup is, you'd think
> >they would have covered all possible configurations!  So, do I shelf it
> >and wait for a patch, reinstall my T1 pedals (I seriously hated those
> >things), or waste a call to tech support?  Decisions, decisions...  If
> >anyone comes up with a solution please pass it along.

> >Sean

> After some frustration, I managed to set up my CH Pro pedals just fine.
> From memory, I think you have to select the "control driven calibration"
> button on the advanced control methods screen and it then lets you calibrate
> it for throttle and brake. (I'm assuming that's your problem).

> Andrew

Hmm, I didn't use that option. The only problem I had was that I had
to calibrate left/right the oposite way around to normal. Since l/r
is entirely arbitrary on the left pedal anyhow, it makes no odds.

What other problems are you (erm, the original poster(s)) having?

Regards,
James.


1. GP2 controller setups for CH Products virtual pilot and pro pedals ?

2. normal CH pedals far better than CH Pro pedals?

3. CH Pedals or CH Pro Pedals

4. GP2 and CH Pro Pedals?

5. Ubisoft F1 and CH Virtual Pilot (Pro) and CH Pedals

6. New Pedals for GPL - CH or CH PRO with pivot ?

7. CH or CH Pro Pedals?

8. Thrustmaster T1 or CH Virtual Pilot Pro + Pro Pedals, Which is Best ?

9. Virtual Karts problems with CH vpilot pro/pro pedals

rec.autos.simulators is a usenet newsgroup formed in December, 1993. As this group was always unmoderated there may be some spam or off topic articles included. Some links do point back to racesimcentral.net as we could not validate the original address. Please report any pages that you believe warrant deletion from this archive (include the link in your email). RaceSimCentral.net is in no way responsible and does not endorse any of the content herein.