On the top right of the screen when driving, there are 3 status bars,
labeled L, Q, and S. I'm guessing L = latency, but can anybody tell me what
they mean.
In the races I was in, L was about half-full, and the Q and S bars were just
a single thin flickering line about half way up. Just before I got
disconnected a couple of times, the bars all got mostly full (:
--
Rob
L atency Full red is 1000ms latency
Q uality Full red is 100% packets loss
S kew Red will indicate a timedifference with the server
In all cases you don't want to see red.
Remco
>On the top right of the screen when driving, there are 3 status bars,
>labeled L, Q, and S. I'm guessing L = latency, but can anybody tell me what
>they mean.
>In the races I was in, L was about half-full, and the Q and S bars were just
>a single thin flickering line about half way up. Just before I got
>disconnected a couple of times, the bars all got mostly full (:
>--
>Rob
Q = Quality
S = Synchronisation (clock, between your GPL clock & the server) it can go
above or below midpoint to denote if you are ahead or behind the server I
believe.
Cheers
Steve
Look in " readme12. txt ", in you GPL folder
> On the top right of the screen when driving, there are 3 status bars,
> labeled L, Q, and S. I'm guessing L = latency, but can anybody tell me what
> they mean.
> In the races I was in, L was about half-full, and the Q and S bars were just
> a single thin flickering line about half way up. Just before I got
> disconnected a couple of times, the bars all got mostly full (:
> --
> Rob
