rec.autos.simulators

F1RS Lockup: WAVX2BVR.DLL

Ron Dodso

F1RS Lockup: WAVX2BVR.DLL

by Ron Dodso » Sun, 28 Jun 1998 04:00:00

Has any else gotten this message (?):

F1VOO caused an invalid page fault in
module WAVX2BVR.DLL at 0157:01d74c84.

Registers:
EAX=00005622 CS=0157 EIP=01d74c84 EFLGS=00210216
EBX=041f4b98 SS=015f ESP=0154fc9c EBP=0154fd08
ECX=000000ff DS=015f ESI=00000000 FS=3b57
EDX=ffffff00 ES=015f EDI=0154fd08 GS=0000
Bytes at CS:EIP:
8b 2e dc 0d 58 b0 d8 01 df 6c 24 10 de c9 e8 99
Stack dump:
01d93594 01d93580 0154fd08 041f4b98 00005622 00000000 01d769a9 00000000
041f4b98 0154fd08 0154fe74 041f4b98 0154fd50 00000000 01d76bfc 041f4b98

Frustration reigns!!

Ron
Dallas

Badrul Hisha

F1RS Lockup: WAVX2BVR.DLL

by Badrul Hisha » Sun, 28 Jun 1998 04:00:00



yeah I had it for a while ... almost made me want to
send it back for a refund.

until i figured out that the problems were to do with
the new drivers that i'd downloaded for the sound
card (Ensonic AudioPCI).  I had to reinstall the old
ones and bingo ... everything works fine.

Try going to the sound menu and do a sound
test eg flip stereo . If you can only hear sound
coming from only one side of the speaker, then
most likely the trouble is with the sound drivers.

hope that helps. have fun.

-bud

Jeff Morri

F1RS Lockup: WAVX2BVR.DLL

by Jeff Morri » Tue, 30 Jun 1998 04:00:00

Greg, thanks for putting the drivers on your webpage.  I have been looking
for these drivers for a little while.  I couldn't find them on Creative
Lab's site.  Maybe they don't want to give them out freely to people who
have an Ensoniq AudioPCI that is not Soundblaster brand.  Anyways, after
installing them I can now enable A3D in Jedi Knight.  Very cool.

Thanks

Jeff


> Get these drivers. They are for the new SBPCI64 (Ensoniq
> AudioPCI with 1370 chipset). These drivers will now allow
> the Directsound3D patch to work properly. All other drivers
> produced very crappy sound in F1RS, except the origional
> drivers which came with the card. These drivers did not
> have 3D sound support though. These drivers also do
> A3D emulation properly (which I tested with StarFleet
> Acadamy).

> http://www.angelfire.com/co/serkaco1/

> --
> Header address intentionally scrambled to ward off the spamming hordes.



B..

F1RS Lockup: WAVX2BVR.DLL

by B.. » Sun, 23 Aug 1998 04:00:00





>>Has any else gotten this message (?):

>>F1VOO caused an invalid page fault in
>>module WAVX2BVR.DLL at 0157:01d74c84.

>yeah I had it for a while ... almost made me want to
>send it back for a refund.

>until i figured out that the problems were to do with
>the new drivers that i'd downloaded for the sound
>card (Ensonic AudioPCI).  I had to reinstall the old
>ones and bingo ... everything works fine.

>Try going to the sound menu and do a sound
>test eg flip stereo . If you can only hear sound
>coming from only one side of the speaker, then
>most likely the trouble is with the sound drivers.

>hope that helps. have fun.

>-bud

What version are your old drivers? Mine are 4.05.1038 and I am having
the same problems. If your drivers are older could you post them here,
I don't have my old ones? If it's not too much trouble.  TIA bud.
And that's the bottom line.
Why? Cause 'Stone Cold' said so!!!!
Badrul Hisha

F1RS Lockup: WAVX2BVR.DLL

by Badrul Hisha » Sun, 23 Aug 1998 04:00:00



Posted by dxinfo.exe :

 Card name      : ENSONIQ AudioPCI
 Wave Out Device: AudioPCI Wave Out
 PnP or PCI ID  : PCI\VEN_1274&DEV_5000\BUS_00&DEV_13&FUNC_00
 Driver         : eapci95.drv
 Version        : 4.02.00.1033 "4.02.1033"  English Beta Retail
 Date and Size  : 06/30/97 09:49:18   77776 bytes
 Current files  : eapci95.drv(English), eapci.vxd(English,  6-27-1997)

Hope ir helps.

-bud

Greg Cisk

F1RS Lockup: WAVX2BVR.DLL

by Greg Cisk » Mon, 24 Aug 1998 04:00:00

Since I have an Ensoniq AudioPCI, I would say *IT* is
not your problem. Game runs great for me, even with 3D
sound.

--
Header address intentionally scrambled to ward off the spamming hordes.





>>What version are your old drivers? Mine are 4.05.1038 and I am having
>>the same problems. If your drivers are older could you post them here,
>>I don't have my old ones? If it's not too much trouble.  TIA bud.
>>And that's the bottom line.
>>Why? Cause 'Stone Cold' said so!!!!

>Posted by dxinfo.exe :

> Card name      : ENSONIQ AudioPCI
> Wave Out Device: AudioPCI Wave Out
> PnP or PCI ID  : PCI\VEN_1274&DEV_5000\BUS_00&DEV_13&FUNC_00
> Driver         : eapci95.drv
> Version        : 4.02.00.1033 "4.02.1033"  English Beta Retail
> Date and Size  : 06/30/97 09:49:18   77776 bytes
> Current files  : eapci95.drv(English), eapci.vxd(English,  6-27-1997)

>Hope ir helps.

>-bud

Tigge

F1RS Lockup: WAVX2BVR.DLL

by Tigge » Tue, 25 Aug 1998 04:00:00

Edit the snd_cpa.ini file so that the line that had:

default=wavx2

reads

default=wavpw

Try that.

Richard Sco

F1RS Lockup: WAVX2BVR.DLL

by Richard Sco » Fri, 28 Aug 1998 04:00:00

If you're running A3D then you need the sound patch from the Ubisoft
site. I had the same problem and the sound patch fixed it for me.

-Richard




1. F1RS : invalid page fault in module WAVX2BVR.DLL ????

2. F1RS and SST1INIT.dll

3. F1RS--Where to find sst1int.dll

4. F1RS Lockups

5. F1RS Help - lockups on P3 600/TnT2 ultra with 1.09 patch

6. auto transmission lockup question: what would happen if you enabled lockup on WOT acceleration??

7. Lockup vs non-lockup torque converters..

8. What's the difference between lockup and non-lockup tranny's

9. 700R4 - Lockup vs. non-lockup

rec.autos.simulators is a usenet newsgroup formed in December, 1993. As this group was always unmoderated there may be some spam or off topic articles included. Some links do point back to racesimcentral.net as we could not validate the original address. Please report any pages that you believe warrant deletion from this archive (include the link in your email). RaceSimCentral.net is in no way responsible and does not endorse any of the content herein.