rec.autos.simulators

by **Marc Andrew Chapma** » Sat, 14 Sep 1996 04:00:00

I use an internal fax modem designated as com4 on my pc. However when i
am in the modem play screen I am only given a choice of com2 with no way
to select com4. Pease help!!!

by **Rene van Lobbereg** » Sun, 15 Sep 1996 04:00:00

> I use an internal fax modem designated as com4 on my pc. However when i
> am in the modem play screen I am only given a choice of com2 with no way
> to select com4. Pease help!!!

On the CD there's a util called COMSETUP.EXE . It's in the directory
\UTILS\COMSETUP.
Before starting GP2, start the util with :
D:\UTILS\COMSETUP\COMSETUP 03E8 02E8
This will set the COM-ports to the normal default adresses.
After this, start GP2 as usual.
When using a mouse on COM1 you will find COM2 and COM4 available.
Without a mousedriver loaded also COM1 and COM3 become available.
On some I/O-cards/modems also the interrupt numbers can be changed.
As far as I know GP2 only uses IRQ3/4 (i.e. IRQ4 for COM1/3 and
IRQ 3 for COM2/4) and this can't be changed.

The COMSETUP-command is neccesary every time before starting GP2 because
GP2 does not remember the changes after a computer-reboot.
The file COMSETUP.EXE can be copied to ANY directory on your harddisk if
you wish to (i.e. your GP2-dir) and then be launched from there.
If you're using DOS-multiconfig like I do, you can add the line to your
autoexec.bat just before the GP2-command.
--
*************************
Dreammaster rules again

*************************
Windows.....brings you yesterday's speed today.

by **waps..** » Sun, 15 Sep 1996 04:00:00

> I use an internal fax modem designated as com4 on my pc. However when i
> am in the modem play screen I am only given a choice of com2 with no way
> to select com4. Pease help!!!

You need to disable the port (com1/3 or comm 2/4)where your modem is
located in your BIOS setup. That should do it, it fixed my problem.

by **John Nielse** » Mon, 16 Sep 1996 04:00:00

> I use an internal fax modem designated as com4 on my pc. However when i
> am in the modem play screen I am only given a choice of com2 with no way
> to select com4. Pease help!!!

Hi there.

I have an internal modem too.

In my gp2 setup, I use this command:

comsetup.exe 2ef 2e8

The comsetup file is on your gp2-cdrom.

My internal modem uses com4 too and the 2e8 is the hex-adress of my PC's

comport 4.

If you use win95, you can see the hex-adress in Start-settings-system.

Good luck.

Let me know if it works for you too... :-)

Regards

Nielsen

http://home1.inet.tele.dk/jnielsen/

rec.autos.simulators

gp2 modem play

gp2 modem play

gp2 modem play

gp2 modem play

gp2 modem play