rec.autos.simulators

From my expreiences with GLQuake, I added those 3Dfx settings to the
GNS3Dfx.bat file as well

SET FX_GLIDE_SWAPINTERVAL=0
SET FX_GLIDE_NO_SPLASH=1
SET SST_FASTMEM=1
SET SST_FASTPCIRD=1
SET SST_SWAP_EN_WAIT_ON_VSYNC=0
SET SST_VIDEO_24BPP=1
REM ---------------------------
SET N2FXAA=2
SET N2FXFOG=0.50
SET N2FXFOGCOLOR=0xa8a8a8
SET N2FXLOAD=0x400000
GNS3DFX.EXE -3DFX

--
-Jeff

"Who needs tech support when you can fix it yourself!!"

NOTICE TO BULK E-MAILERS:
Pursuant to US Code, Title 47, Chapter 5, Subchapter II, p.227, any and
all nonsolicited
commercial E-mail sent to binary.net is subject to a download and
archival fee in the
amount of Five-Hundred Dollars U.S. E-Mailing denotes acceptance of
these terms.

You don't need the above line unless you have the refresh set on the
3DFX card higher than 75hz. I see no line in your config for refresh
rate so that means it's going to default to 60hz. Following is the
line you need to set the refresh rate.

SET SST_SCREENREFRESH=75

--
Nos
send all flames to:

http://www.cris.com/~nosfer/index.html
ICQ:#8844008                

If you read the subject line of my posting, I have a Pure3D.  And in
case you didn't know, the Pure3D's refresh rate, gamma setting, and
clock speed are set via its Win95 drivers, not with SET statements like
the Monster3D.  So fear not, I do know what I am doing.

No, I didn't know that. Sorry for my mistake, but if one doesn't have
a Pure3D then how can you expect them to know that. I wasn't
criticizing your abilities, just trying to help. There is no need for
your insulting tone.
--
Nos
send all flames to:

http://www.cris.com/~nosfer/index.html
ICQ:#8844008                

--
-Jeff

"Who needs tech support when you can fix it yourself!!"

NOTICE TO BULK E-MAILERS:
Pursuant to US Code, Title 47, Chapter 5, Subchapter II, p.227, any and all
nonsolicited
commercial E-mail sent to binary.net is subject to a download and archival
fee in the
amount of Five-Hundred Dollars U.S. E-Mailing denotes acceptance of these
terms.