rec.autos.simulators

http://www.racesimcentral.net/

It mentions the following parameter:

alt2axcode=0xJJKKDirect joystick 2-axis configuration
To select the axis choose from the following:
00 = x-axis
01 = y-axis
02 = z-axis
03 = rx-axis
04 = ry-axis
05 = rz-axis
JJ defines the axis to use for steering and KK for brake/acceleration. For
example alt2axcode=0x0001 is the same as the usual default of using the
x-axis for steering and the y axis for brake and accelerate.

In ral.cfg created by Ral Wizard I found the following parameter:
joymode=3; set 3-axis mode
joycode=0x05020000; Logitech Wingman FF (closest to my wheel)

What combination should I use in my ral.cfg file for the wheel?

Report combined axis unchecked in the windows control panel.

Thanks in advance,
    Igor

Here's what I learned from paging thru RC's menu pages:

Set the Steer Sens. slider full left or you won't be able to keep the car on
the road.
It picks up the controller title from Windows.
Turn Act Labs off.
Set FF to 20% (it's too strong at high values).
The axis mode should say 3-axis wheel + pedals.
Set the upper & lower DZs to zero.  (Something like DXTweak should be used
first.)
On my MOMO, RC reports the acc axis as -z, the brake as -rz, left as left
and right as right.
As I remember it, you may have to gently prod the axes to get the
recognition to "stick."

That's what works for moi.

--Steve