rec.autos.simulators

(must relax now)

Regards,

Mark

--
Olav Malmin
remove .spam when replying

--
The first ever pinball ezboard !!
http://pub7.ezboard.com/bpinball

SYS80 : BLK HOLE - HNTD HSE - SPRIT - VOLCNO - PNK PNTHER - DEVLS DARE - RYL
FLSH DLX - SPDERMAN - CHRLIE'S NGELS - TX SCTOR - MRS GOW - RBO WARS
BALLY : XENN - EGHT BLL - EGHT BLL CHMP - PACMN - SPKEASY 4 - STRKES N
SPRES -  SPCE INVDERS - FTRE SPA - LADY LCK - PRAGON
WILLIAMS : BLCKOUT - CNTACT - ADDMS FAMLY

Pedal unit or wheel ??

Heres how to take the pedal unit apart :
http://www.lugnutsracing.com/pedals.html

I tried this squashball mod once but found it a bit too hard.
When I had assembled the pedalunit again the throttle made a strange spoiing
sound every time I stepped on it.
Turned out the spring had to be rotated a bit.

I did look inside the wheel once, to see why it was working.....8-)

You start with the 6 Unbraco bolts in the center of the wheel.
Then you can lift up the wheel, two small connectors must be removed.
Think the connectors are identical, so take a note of the wire colors.
Then you remove the small shiny philips screws in the button to get of the
red cover.

There is a metal 'gearbox', did not try to take that apart but think that
was held together by some philips screws.

/JS

To be correct here:
 you then remove the Alu-plate with the button to get to the two small
cables you need to remove before lifting of the wheel.

/JS

Regards,

Mark

http://www.wingmanteam.com/discus/messages/4/1281.html?ThursdayMay220...

Cheers!

Regards,

Mark Davison
http://www.markdavison.clara.net/OVAL/
"No more rhymes, now.  I mean it!"
"Anybody wanna peanut?"

Ice D