Hey:
I got N4 for Christmas and have loved it, howerver I noticed last
night the frame rate did not seem as smooth. Is 30 a good rate? I have
dell 1.6 w/ 64MB video card and 512 RAM.
Thanks
Is 30 fps good enough in NASCAR 4?
A new NASCAR 4 owner asked if 30 fps was acceptable. The claim that the eye cannot see above 30 fps was disputed with references to motion blur, film projection rates and a 30-versus-60 fps article, while others shared their settings and framerates. Tips included turning off anti-aliasing and vsync and running in OpenGL on a GeForce2 MX.
Automated summary.
If it doesn't seem smooth it's probably not consistently 30. I find
consistent fps more important than "peak" fps. Example: GPL runs great for
me since it's consistent 36 fps (36 fps is max for GPL). A few years ago I
would run it in the low 30's "peak" with many dips in the low 20's and
sometimes even into the teens. This affected my driving significantly
because those dips were not just visually distracting they were hazardous.
;0) I would make quick wheel adjustments under slow fps which resulted in
the wrong input for the situation (out of sync steering). More often than
not under slow fps I would lose control in a tight spot.
My rule of thumb is consistently over 30 is mandatory and 40+ is ideal (36+
is available in most other games like F1 2001 & N4).
--
Joe Marques
<[email hidden]> wrote in message
news:[email hidden]...
> Hey:
>
> I got N4 for Christmas and have loved it, howerver I noticed last
> night the frame rate did not seem as smooth. Is 30 a good rate? I have
> dell 1.6 w/ 64MB video card and 512 RAM.
>
> Thanks
Repeated tests have shown that the human eye is incapable of noticing a
difference once the rate rises above 30fps. Getting a high FPS has turned
into a testosterone thing with some simmers.
If you want a steady rate, and you've got a potent PC, try turning vsync
back on.
<[email hidden]> wrote in message
news:[email hidden]...
Quoted text (7 lines)
> Hey: > > I got N4 for Christmas and have loved it, howerver I noticed last > night the frame rate did not seem as smooth. Is 30 a good rate? I have > dell 1.6 w/ 64MB video card and 512 RAM. > > ThanksYou may need to turn of AntiAliasing and Vertical sync in the video
properties. Even with a 1.6 intel should run faster than that depending on
what video card you have.
<[email hidden]> wrote in message
news:[email hidden]...
Quoted text (7 lines)
> Hey: > > I got N4 for Christmas and have loved it, howerver I noticed last > night the frame rate did not seem as smooth. Is 30 a good rate? I have > dell 1.6 w/ 64MB video card and 512 RAM. > > ThanksI must disagree based on what I've read (motion blur) and my own perception
when comparing 30 fps to 60 fps. Humans can perceive the difference between
30 and 60 fps.
Here's an interesting piece on the topic:
http://www.penstarsys.com/editor/30v60/30v60p1.htm
--
Joe Marques
"P.C. Oxford" <[email hidden]> wrote in message
news:Nkz68.12084$[email hidden]...
> Repeated tests have shown that the human eye is incapable of noticing a
> difference once the rate rises above 30fps. Getting a high FPS has turned
> into a testosterone thing with some simmers.
> If you want a steady rate, and you've got a potent PC, try turning vsync
> back on.
>
> <[email hidden]> wrote in message
> news:[email hidden]...
> > Hey:
> >
> > I got N4 for Christmas and have loved it, howerver I noticed last
> > night the frame rate did not seem as smooth. Is 30 a good rate? I have
> > dell 1.6 w/ 64MB video card and 512 RAM.
> >
> > Thanks
>
>
Interesting article. Maybe I'll have to revise what may be common
misperception; for video games, lacking the motion blur phenomenon, 72fps
may be the ideal rate.
In N4 with my system, 850/256/32mb, 40fps is about the best I can do with
1024x768 and full draw ahead. (Sob).
"Joe Marques" <[email hidden]> wrote in message
news:otB68.17793$[email hidden]...
> I must disagree based on what I've read (motion blur) and my ownperception
> when comparing 30 fps to 60 fps. Humans can perceive the differencebetween
> 30 and 60 fps.
>
>
"P.C. Oxford" <[email hidden]> wrote in message
news:Nkz68.12084$[email hidden]...
> Repeated tests have shown that the human eye is incapable of noticing a
> difference once the rate rises above 30fps.
Ive heard that a million times, but N4 looks like crap at 30 fps.
Ive heard that a million times, but N4 looks like ***at 30 fps.
"Mike Grandy" <[email hidden]> wrote in message
news:guA68.14940$[email hidden]...
> You may need to turn of AntiAliasing and Vertical sync in the video
> properties. Even with a 1.6 intel should run faster than that depending on
> what video card you have.
>agreed. I have the same dell 1.6 gig, with only a 32mg card and i get 80 fps
at 1024x768, so the poster has some tweaking to do....
"P.C. Oxford" <[email hidden]> writes:
> Repeated tests have shown that the human eye is incapable of noticing a
> difference once the rate rises above 30fps.
not true. the human eye stops noticing _flickering_ at a moderately
low frame rate limit.
> If you want a steady rate, and you've got a potent PC, try turning vsync
> back on.
good advice, though. :)
--
Gunnar
#31 SUCKS#015 Tupperware MC#002 DoD#0x1B DoDRT#003 DoD:CT#4,8 Kibo�: 2
FJ�SE!
"Joe Marques" <[email hidden]> writes:
I have a comment on that article:
anyone who thinks a movie in a theater is smooth needs to have their
eyes examined.
and they're 48 FPS, not 24.
--
Gunnar
#31 SUCKS#015 Tupperware MC#002 DoD#0x1B DoDRT#003 DoD:CT#4,8 Kibo�: 2
"a poster is a human being or the software equivalent"
Quoted text (7 lines)
> I must disagree based on what I've read (motion blur) and my own perception > when comparing 30 fps to 60 fps. Humans can perceive the difference between > 30 and 60 fps. > > Here's an interesting piece on the topic: > > http://www.penstarsys.com/editor/30v60/30v60p1.htm
"Gunnar Horrigmo" <[email hidden]>
wrote in message
news:[email hidden]
o...
> "Joe Marques" <[email hidden]>writes:
>
> I have a comment on that article:
>
> anyone who thinks a movie in a theateris smooth needs to have their
> eyes examined.
>
> and they're 48 FPS, not 24.
> Gunnar
ahhhmmm,
what planet is the film industry whose
products you've been watching hails
from?
where's this info of 48 or is it in your
head and therefore becomes fact?
just wondering ;-)
rob
On Fri, 01 Feb 2002 20:05:52 GMT, rik zeppelin wrote:
>I have the same dell 1.6 gig, with only a 32mg card and i get 80 fps
>at 1024x768
Yeah, but N4 looks like crap in anything less than 1600x1200 ;-)
No, seriously, it's beyond me why anybody would prefer 1024x768 and 80 fps
over a higher resolution and a more modest frame rate.
Best regards,
Henrik Dissing
"rb" <[email hidden]> writes:
it's in the manuals of all the film projectors I've used. it's
even in the rec.arts.movies.tech FAQ
<URL:http://www.faqs.org/faqs/movies/tech/part1/>
# standard IMAX (tm) , like almost every other format, runs at 24 fps.
# Supposedly this could give a clearer picture with fewer
# `strobing'-type artifacts of the usual double-bladed shutter used
# for 35mm and standard 65mm (Showscan (tm) and IMAX-HD (tm) both use
# projector shutters which show each image only once) and other
# shortcomings of the 24 fps standard, in which the projector normally
# shows each frame twice (using a double-bladed shutter, which makes
# one revolution for each frame), which reduces apparent flicker
# somewhat. Formats using the higher frame rate do not appear to
# flicker anyway, and thus do not need this `fix.'
> just wondering ;-)
and now you know. :)
--
Gunnar
#31 SUCKS#015 Tupperware MC#002 DoD#0x1B DoDRT#003 DoD:CT#4,8 Kibo�: 2
FJ�SE!
Quoted text (24 lines)
> "Gunnar Horrigmo" <[email hidden]> > wrote in message > news:[email hidden] > o... > > "Joe Marques" <[email hidden]> > writes: > > > > > I have a comment on that article: > > > > anyone who thinks a movie in a theater > is smooth needs to have their > > eyes examined. > > > > and they're 48 FPS, not 24. > > ahhhmmm, > > what planet is the film industry whose > products you've been watching hails > from? > > where's this info of 48 or is it in your > head and therefore becomes fact?
>
> it's in the manuals of all the film projectors I've used.it's
> even in the rec.arts.movies.tech FAQ
> <URL:http://www.faqs.org/faqs/movies/tech/part1/>
>
> # standard IMAX (tm) , like almost every other format,runs at 24 fps.
> # Supposedly this could give a clearer picture with fewer
> # `strobing'-type artifacts of the usual double-bladedshutter used
> # for 35mm and standard 65mm (Showscan (tm) and IMAX-HD(tm) both use
> # projector shutters which show each image only once) andother
> # shortcomings of the 24 fps standard, in which theprojector normally
> # shows each frame twice (using a double-bladed shutter,which makes
> # one revolution for each frame), which reduces apparentflicker
> # somewhat. Formats using the higher frame rate do notappear to
> # flicker anyway, and thus do not need this `fix.'
>
>
> > just wondering ;-)
>
> and now you know. :)
sorry to be dense, but i could swear the above info says
imax is like "almost every other format." but i can see
where yr coming from if equipment is now going to start
showing the same frame twice. so it's a 24 fps x 2. so
seeing the same frame twice within the same period
constitutes 48 fps. hmmmmm. still sounds like 24
individual fps.
could be a different language than i'm used to. help me
understand.
but please......be gentle.....
rob
. Formats using the higher frame rate do not appear to
> # flicker anyway, and thus do not need this `fix.'
>
okay okay, there's the line you meant me to read!
now i know which planet. that not industry standard planet.
i know that planet well,,,,, (okay, i've heard of it and
have been accused of being from there). thanx for the info.
rob
"Henrik Dissing"
Because Henrik, there will ALWAYS be those out there who ARE NOT satisfied
by the norm, who must, for various reasons(curiosity, pride, ego,
narcisisim<sp?>) they MUST have bigger screens higher rez's.
Now having said that, this is not a bad thing. Otherwise we'd still all
be putzing around at 640x480 and calling it high rez.
Besides {hehehehe} most of these users have a vid card that is incapable
of using features that make these lower resolutions palatable....[lol]
JOKING FOLKS don't get yer panties in a bunch....
dave henrie
Quoted text (7 lines)
> Yeah, but N4 looks like crap in anything less than 1600x1200 ;-) > > No, seriously, it's beyond me why anybody would prefer 1024x768 and 80 fps > over a higher resolution and a more modest frame rate. > > Best regards, > Henrik DissingIn article <[email hidden]>, Henrik Dissing
<[email hidden]> writes:
If running at 1600x1200 drops the framerate to 40 or 50, do you really gain
anything by using the higher resolution?
Hell, I'm still running 1024x768 in GPL, and that's locked at 36fps... I'll
have to check my fps again in N4 - last time I remember checking it, it was
around 24? Maybe 30...
Eldred
--
Dale Earnhardt, Sr. R.I.P. 1951-2001
Homepage - http://www.umich.edu/~epickett
GPLRank - under construction...
Never argue with an idiot. He brings you down to his level, then beats you
with experience...
Remove SPAM-OFF to reply.
Quoted text (9 lines)
>On Fri, 01 Feb 2002 20:05:52 GMT, rik zeppelin wrote: > >>I have the same dell 1.6 gig, with only a 32mg card and i get 80 fps >>at 1024x768 > >Yeah, but N4 looks like crap in anything less than 1600x1200 ;-) > >No, seriously, it's beyond me why anybody would prefer 1024x768 and 80 fps >over a higher resolution and a more modest frame rate.Hi guys:
Thanks for all the replies.
I am running the OpenGL mode at 1024x768x32, and I do not see where to
adjust the vsync and AntiAliasing settings. Are they in N4 or in my
system video settings. I looked in both places and did not see them.
Also, could someone either give me some options to tweak, or point me
towards a FAQ that would help.
thanks again for all the comments.
On Fri, 01 Feb 2002 20:05:52 GMT, "rik zeppelin"
<[email hidden]> wrote:
Quoted text (11 lines)
> >"Mike Grandy" <[email hidden]> wrote in message >news:guA68.14940$[email hidden]... >> You may need to turn of AntiAliasing and Vertical sync in the video >> properties. Even with a 1.6 intel should run faster than that depending on >> what video card you have. >> >agreed. I have the same dell 1.6 gig, with only a 32mg card and i get 80 fps >at 1024x768, so the poster has some tweaking to do.... > >On Fri, 01 Feb 2002 16:26:21 GMT, "P.C. Oxford"
<[email hidden]> wrote:
>Repeated tests have shown that the human eye is incapable of noticing a
>difference once the rate rises above 30fps.
Won't this myth *EVER* die?!?
"rb" <[email hidden]> writes:
> sorry to be dense, but i could swear the above info says
> imax is like "almost every other format." but i can see
> where yr coming from if equipment is now going to start
> showing the same frame twice. so it's a 24 fps x 2. so
> seeing the same frame twice within the same period
> constitutes 48 fps.
yes. 24 different frames, but 48 "refreshes" if you will.
> hmmmmm. still sounds like 24 individual fps.
> could be a different language than i'm used to. help me
> understand.
hey! that's my excuse! :D
--
Gunnar
#31 SUCKS#015 Tupperware MC#002 DoD#0x1B DoDRT#003 DoD:CT#4,8 Kibo�: 2
gitaren er en sjingke
What video card do you have. With my geforce2 mx400, 850mhz and 128mb
ram i get (when it works) great framerates in practise with everything
in full, and with a few things turned off like mirror to cars only
etc, racing runs ultra smooth also. Either your video card is not up
to it (doubtful with 64mb) or something else is up.
Luke
[email hidden] wrote in message news:<[email hidden]>...
Quoted text (29 lines)
> Hi guys: > > Thanks for all the replies. > > I am running the OpenGL mode at 1024x768x32, and I do not see where to > adjust the vsync and AntiAliasing settings. Are they in N4 or in my > system video settings. I looked in both places and did not see them. > Also, could someone either give me some options to tweak, or point me > towards a FAQ that would help. > > thanks again for all the comments. > > > > > On Fri, 01 Feb 2002 20:05:52 GMT, "rik zeppelin" > <[email hidden]> wrote: > > > > >"Mike Grandy" <[email hidden]> wrote in message > >news:guA68.14940$[email hidden]... > >> You may need to turn of AntiAliasing and Vertical sync in the video > >> properties. Even with a 1.6 intel should run faster than that depending on > >> what video card you have. > >> > >agreed. I have the same dell 1.6 gig, with only a 32mg card and i get 80 fps > >at 1024x768, so the poster has some tweaking to do.... > > > >On 02 Feb 2002 05:21:17 GMT, EldredP wrote:
>If running at 1600x1200 drops the framerate to 40 or 50, do you really gain
>anything by using the higher resolution?
Oh yes, oh yes, oh yes. I'd let it drop below 30 before even considering
going to a lower resolution. But, chacun a son gout :-)
Best regards,
Henrik Dissing
Gunnar Horrigmo <[email hidden]> wrote in
news:[email hidden]:
Not really any different to playing a game at 30fps on a monitor that is
running a 60hz resolution then. ie still noticeably jerky compared to a
60fps update.
for animation, I have used software that will take a (for example) 24fps
animation, and generate transition frames between each actual frame and
then run the lot at 48fps for smoother playback with motion blurring.
Your projector system doesn't do that though, it just repeats each frame.
cheers
John
Quoted text (11 lines)
> "rb" <[email hidden]> writes: > >> sorry to be dense, but i could swear the above info says >> imax is like "almost every other format." but i can see >> where yr coming from if equipment is now going to start >> showing the same frame twice. so it's a 24 fps x 2. so >> seeing the same frame twice within the same period constitutes 48 fps. >> > > yes. 24 different frames, but 48 "refreshes" if you will. >In article <[email hidden]>, Henrik Dissing
<[email hidden]> writes:
"Each has his own taste?" Ok, I guess so.
I ran some tests last night...damn, can't find the paper I wrote it on...hang
on
<rifles through all the crap on the desk>
<looks on floor>
Ah! Here it is...(some filing system, huh?<g>)
Athlon 1.2G, V5(32MB) win98se
Track: Atlanta, 20 opponents, single race practice
800x600x16 37 fps
1024x768x16 24 fps
1280x960x16 20 fps
I could drive ok with 37 fps, 24 fps was difficult, and 20 fps gave me a
headache...
I didn't even TRY the 32-bit color, based on how slow 16-bit was. Car detail
was medium, world detail slider was set in the middle, drawing distance
50%ahead, 25% mirrors, mirror objects medium, trackside: some. All effects on
except specular highlights(grayed out).
That was in D3D mode. I just tried OpenGL - at 800x600x16, just sitting in the
pits was 19 fps...
What fps are people with a similar system getting?
Eldred
--
Dale Earnhardt, Sr. R.I.P. 1951-2001
Homepage - http://www.umich.edu/~epickett
GPLRank - under construction...
Never argue with an idiot. He brings you down to his level, then beats you
with experience...
Remove SPAM-OFF to reply.
Quoted text (7 lines)
>On 02 Feb 2002 05:21:17 GMT, EldredP wrote: > >>If running at 1600x1200 drops the framerate to 40 or 50, do you really gain >>anything by using the higher resolution? > >Oh yes, oh yes, oh yes. I'd let it drop below 30 before even considering >going to a lower resolution. But, chacun a son gout :-)
"EldredP" <[email hidden]> wrote in message
news:[email hidden]...
> In article <[email hidden]>, Henrik Dissing
> <[email hidden]> writes:
>
> >On 02 Feb 2002 05:21:17 GMT, EldredP wrote:
> >
> >>If running at 1600x1200 drops the framerate to 40 or 50, do you reallygain
on...hang
detail
> was medium, world detail slider was set in the middle, drawing distance
> 50%ahead, 25% mirrors, mirror objects medium, trackside: some. Alleffects on
> except specular highlights(grayed out).
> That was in D3D mode. I just tried OpenGL - at 800x600x16, just sittingin the
> pits was 19 fps...
>
> What fps are people with a similar system getting?
>
> Eldred
I'm running an Athlon XP1600 ( 1.4 ghz), EPoX 8KHA+ mb, and GeForce 3 Ti200
vid card.
1280x960x32 = average around 60-65 fps ( online) 45-55 fps offline with full
field. 70+ in testing. Open GL.
Car details high - world detail in middle, drawn ahead around 70%, mirror
objects medium, trackside some.
Don Burnette
Quoted text (7 lines)
> >>anything by using the higher resolution? > > > >Oh yes, oh yes, oh yes. I'd let it drop below 30 before even considering > >going to a lower resolution. But, chacun a son gout :-) > > "Each has his own taste?" Ok, I guess so. > I ran some tests last night...damn, can't find the paper I wrote itQuoted text (13 lines)
> on > <rifles through all the crap on the desk> > <looks on floor> > Ah! Here it is...(some filing system, huh?<g>) > > Athlon 1.2G, V5(32MB) win98se > Track: Atlanta, 20 opponents, single race practice > 800x600x16 37 fps > 1024x768x16 24 fps > 1280x960x16 20 fps > I could drive ok with 37 fps, 24 fps was difficult, and 20 fps gave me a > headache... > I didn't even TRY the 32-bit color, based on how slow 16-bit was. CarVSync and anti-aliasing are usually in the display properties or some control panel especially for
your video card, you didn't say what it was so more specific help is impossible.
--
Biz
"Don't touch that please, your primitive intellect wouldn't understand
alloys and compositions and,......things with molecular structures,....and
the....." - Ash
<[email hidden]> wrote in message news:[email hidden]...
> Hi guys:
>
> Thanks for all the replies.
>
> I am running the OpenGL mode at 1024x768x32, and I do not see where to
> adjust the vsync and AntiAliasing settings. Are they in N4 or in my
> system video settings. I looked in both places and did not see them.
> Also, could someone either give me some options to tweak, or point me
> towards a FAQ that would help.
>
> thanks again for all the comments.
>
>
>
>
> On Fri, 01 Feb 2002 20:05:52 GMT, "rik zeppelin"
> <[email hidden]> wrote:
>
> >
> >"Mike Grandy" <[email hidden]> wrote in message
> >news:guA68.14940$[email hidden]...
> >> You may need to turn of AntiAliasing and Vertical sync in the video
> >> properties. Even with a 1.6 intel should run faster than that depending on
> >> what video card you have.
> >>
> >agreed. I have the same dell 1.6 gig, with only a 32mg card and i get 80 fps
> >at 1024x768, so the poster has some tweaking to do....
> >
> >
>
EldredP wrote:
Not a similar system really, but here goes.
PIII 850@910/GeForce2 GTS 32MB/384MB PC133/WinXP
1024x768x16 in OpenGL
Car Detail-Hi
World Detail- 2/3 (between the "v" & "e")
Draw distance-55 ahead
20 mirror
Opp drawn-20 ahead
3 mirror
Mirror obj-med
Trackside obj-all
All other effects on but Specular Highlight
I also run 2xFSAA. Online DegaTona races I avg around 45-50fps. Could
be better I suppose, but I'm an eyecandy junkie & don't like to turn it
down too low. :-)
--
Fester
"Is it that we need a nobrainer Linux desktop OS for people with no
brains or should people do a little more reading and smarten up?"
from alt.linux.mandrake NG
Quoted text (16 lines)
> > Athlon 1.2G, V5(32MB) win98se > Track: Atlanta, 20 opponents, single race practice > 800x600x16 37 fps > 1024x768x16 24 fps > 1280x960x16 20 fps > I could drive ok with 37 fps, 24 fps was difficult, and 20 fps gave me a > headache... > I didn't even TRY the 32-bit color, based on how slow 16-bit was. Car detail > was medium, world detail slider was set in the middle, drawing distance > 50%ahead, 25% mirrors, mirror objects medium, trackside: some. All effects on > except specular highlights(grayed out). > That was in D3D mode. I just tried OpenGL - at 800x600x16, just sitting in the > pits was 19 fps... > > What fps are people with a similar system getting?
"Uncle Fester"
> I also run 2xFSAA. Online DegaTona races I avg around 45-50fps. Could
> be better I suppose, but I'm an eyecandy junkie & don't like to turn it
> down too low. :-) At least with my limited time with N4, I got about 10fps better
framerate online than offline. But each track was different, some always
got better framerates than other tracks.
dave henrie
My video card is 64 MB Nvidia GeForce 2 MX with TV Out.
I have found the anti aliasing control. My options are: Let the
application control anti alaising mode (Selected) OR
Off
2x
4x
On Sat, 02 Feb 2002 22:33:00 GMT, "Biz" <[email hidden]>
wrote:
Quoted text (44 lines)
>VSync and anti-aliasing are usually in the display properties or some control panel especially for >your video card, you didn't say what it was so more specific help is impossible. > >-- >Biz > >"Don't touch that please, your primitive intellect wouldn't understand >alloys and compositions and,......things with molecular structures,....and >the....." - Ash > > ><[email hidden]> wrote in message news:[email hidden]... >> Hi guys: >> >> Thanks for all the replies. >> >> I am running the OpenGL mode at 1024x768x32, and I do not see where to >> adjust the vsync and AntiAliasing settings. Are they in N4 or in my >> system video settings. I looked in both places and did not see them. >> Also, could someone either give me some options to tweak, or point me >> towards a FAQ that would help. >> >> thanks again for all the comments. >> >> >> >> >> On Fri, 01 Feb 2002 20:05:52 GMT, "rik zeppelin" >> <[email hidden]> wrote: >> >> > >> >"Mike Grandy" <[email hidden]> wrote in message >> >news:guA68.14940$[email hidden]... >> >> You may need to turn of AntiAliasing and Vertical sync in the video >> >> properties. Even with a 1.6 intel should run faster than that depending on >> >> what video card you have. >> >> >> >agreed. I have the same dell 1.6 gig, with only a 32mg card and i get 80 fps >> >at 1024x768, so the poster has some tweaking to do.... >> > >> > >> > >So turn it off, and check fps again. On the OPenGL tab, you can turn off vsync as well. Since its
GF2 MX card, N4 will run best in OpenGL.
<[email hidden]> wrote in message news:[email hidden]...
for
Quoted text (16 lines)
> My video card is 64 MB Nvidia GeForce 2 MX with TV Out. > > I have found the anti aliasing control. My options are: Let the > application control anti alaising mode (Selected) OR > Off > 2x > 4x > > > > > > On Sat, 02 Feb 2002 22:33:00 GMT, "Biz" <[email hidden]> > wrote: > > >VSync and anti-aliasing are usually in the display properties or some control panel especiallyQuoted text (44 lines)
> >your video card, you didn't say what it was so more specific help is impossible. > > > >-- > >Biz > > > >"Don't touch that please, your primitive intellect wouldn't understand > >alloys and compositions and,......things with molecular structures,....and > >the....." - Ash > > > > > ><[email hidden]> wrote in message news:[email hidden]... > >> Hi guys: > >> > >> Thanks for all the replies. > >> > >> I am running the OpenGL mode at 1024x768x32, and I do not see where to > >> adjust the vsync and AntiAliasing settings. Are they in N4 or in my > >> system video settings. I looked in both places and did not see them. > >> Also, could someone either give me some options to tweak, or point me > >> towards a FAQ that would help. > >> > >> thanks again for all the comments. > >> > >> > >> > >> > >> On Fri, 01 Feb 2002 20:05:52 GMT, "rik zeppelin" > >> <[email hidden]> wrote: > >> > >> > > >> >"Mike Grandy" <[email hidden]> wrote in message > >> >news:guA68.14940$[email hidden]... > >> >> You may need to turn of AntiAliasing and Vertical sync in the video > >> >> properties. Even with a 1.6 intel should run faster than that depending on > >> >> what video card you have. > >> >> > >> >agreed. I have the same dell 1.6 gig, with only a 32mg card and i get 80 fps > >> >at 1024x768, so the poster has some tweaking to do.... > >> > > >> > > >> > > > > >In article <[email hidden]>, Uncle Fester <[email hidden]>
writes:
>I also run 2xFSAA. Online DegaTona races I avg around 45-50fps. Could
>be better I suppose, but I'm an eyecandy junkie & don't like to turn it
>down too low. :-)
Hmm... You're getting better framerates with a slower machine. Damn...
Eldred
--
Dale Earnhardt, Sr. R.I.P. 1951-2001
Homepage - http://www.umich.edu/~epickett
GPLRank - under construction...
Never argue with an idiot. He brings you down to his level, then beats you
with experience...
Remove SPAM-OFF to reply.
Quoted text (7 lines)
> A few years ago I >would run it in the low 30's "peak" with many dips in the low 20's and >sometimes even into the teens. This affected my driving significantly >because those dips were not just visually distracting they were hazardous. >;0) I would make quick wheel adjustments under slow fps which resulted in >the wrong input for the situation (out of sync steering). More often than >not under slow fps I would lose control in a tight spot.>>Repeated tests have shown that the human eye is incapable of noticing a
>>difference once the rate rises above 30fps.
>
>Won't this myth *EVER* die?!?
Hehe.. To me, that's kinda like saying watching the race on TV yesterday
looked like crap 'cause it was only running 30fps... I don't get it either!
lol Oh well...
Todd Wasson
---
Performance Simulations
Drag Racing and Top Speed Prediction
Software
http://PerformanceSimulations.Com
My little car sim screenshots:
http://performancesimulations.com/scnshot4.htm
[email hidden] (J. Todd Wasson) writes:
30 fps would be good enough if the games had proper motion blur, like
cinematic film and tv has.
--
Olav K. Malmin
remove .spam when replying
Quoted text (8 lines)
> >>Repeated tests have shown that the human eye is incapable of noticing a > >>difference once the rate rises above 30fps. > > > >Won't this myth *EVER* die?!? > > Hehe.. To me, that's kinda like saying watching the race on TV yesterday > looked like crap 'cause it was only running 30fps... I don't get it either! > lol Oh well...On 06 Feb 2002 14:48:08 +0100, [email hidden] (Olav K.
Malmin) wrote:
Yup, CG graphics on our graphics cards are the equivalent of shooting
film with infinitely short shutter time. If you would do that on TV or
film it would look "strobed", and was used as an effect in Gladiator.
Which looked kinda cool, but not very real.
If 24/25/30fps is "enough" is debatable, really, even with stellar
motion-blur. In fast pans everything becomes a blurred mess. Some
IMAX-formats for instance use 60fps. The best would probably be
infinite framerate instead. :)
Besides, if someone thinks that the can't see a difference between 30
and 60fps on the computer, it just tells me that the person in
question has a crap system. :-)
Quoted text (11 lines)
>> >>Repeated tests have shown that the human eye is incapable of noticing a >> >>difference once the rate rises above 30fps. >> > >> >Won't this myth *EVER* die?!? >> >> Hehe.. To me, that's kinda like saying watching the race on TV yesterday >> looked like crap 'cause it was only running 30fps... I don't get it either! >> lol Oh well... > >30 fps would be good enough if the games had proper motion blur, like >cinematic film and tv has.On 06 Feb 2002 13:45:44 GMT, [email hidden] (J. Todd Wasson) wrote:
Try this: Set your monitor to like 120Hz refresh rate. Wave your
finger rapidly in front of it. Now do it in front of a lightbulb.
Notice a difference?
Quoted text (8 lines)
>>>Repeated tests have shown that the human eye is incapable of noticing a >>>difference once the rate rises above 30fps. >> >>Won't this myth *EVER* die?!? > > Hehe.. To me, that's kinda like saying watching the race on TV yesterday >looked like crap 'cause it was only running 30fps... I don't get it either! >lol Oh well...>Try this: Set your monitor to like 120Hz refresh rate. Wave your
>finger rapidly in front of it. Now do it in front of a lightbulb.
>Notice a difference?
>
Can't do it on my laptop... :-(
Todd Wasson
---
Performance Simulations
Drag Racing and Top Speed Prediction
Software
http://PerformanceSimulations.Com
My little car sim screenshots:
http://performancesimulations.com/scnshot4.htm
Quoted text (15 lines)
>Yup, CG graphics on our graphics cards are the equivalent of shooting >film with infinitely short shutter time. If you would do that on TV or >film it would look "strobed", and was used as an effect in Gladiator. >Which looked kinda cool, but not very real. > >If 24/25/30fps is "enough" is debatable, really, even with stellar >motion-blur. In fast pans everything becomes a blurred mess. Some >IMAX-formats for instance use 60fps. The best would probably be >infinite framerate instead. :) > >Besides, if someone thinks that the can't see a difference between 30 >and 60fps on the computer, it just tells me that the person in >question has a crap system. :-) > >Quoted text (8 lines)
>> Hehe.. To me, that's kinda like saying watching the race on TV yesterday >> looked like crap 'cause it was only running 30fps... I don't get it >either! >> lol Oh well... > >30 fps would be good enough if the games had proper motion blur, like >cinematic film and tv has. >In article <[email hidden]>, na_biker
<[email hidden]> writes:
>Yup, CG graphics on our graphics cards are the equivalent of shooting
>film with infinitely short shutter time. If you would do that on TV or
>film it would look "strobed", and was used as an effect in Gladiator.
>Which looked kinda cool, but not very real.
That must be the same way they did the battle scenes in Saving Private Ryan and
LOTR... Yep, it's a cool effect.
Eldred
--
Dale Earnhardt, Sr. R.I.P. 1951-2001
Homepage - http://www.umich.edu/~epickett
GPLRank - under construction...
Never argue with an idiot. He brings you down to his level, then beats you
with experience...
Remove SPAM-OFF to reply.
Actually the way they did the scenes In SPR was not changing speeds but
chaging the angle of the shutter on the camera.
Chris G.
"EldredP" <[email hidden]> wrote in message
news:[email hidden]...
Ryan and
you
> with experience...
> Remove SPAM-OFF to reply.
Quoted text (9 lines)
> In article <[email hidden]>, na_biker > <[email hidden]> writes: > > >Yup, CG graphics on our graphics cards are the equivalent of shooting > >film with infinitely short shutter time. If you would do that on TV or > >film it would look "strobed", and was used as an effect in Gladiator. > >Which looked kinda cool, but not very real. > > That must be the same way they did the battle scenes in Saving PrivateQuoted text (9 lines)
> LOTR... Yep, it's a cool effect. > > Eldred > -- > Dale Earnhardt, Sr. R.I.P. 1951-2001 > Homepage - http://www.umich.edu/~epickett > GPLRank - under construction... > > Never argue with an idiot. He brings you down to his level, then beatsIn article <%XW88.19372$[email hidden]>, "cgenn27"
<[email hidden]> writes:
>Actually the way they did the scenes In SPR was not changing speeds but
>chaging the angle of the shutter on the camera.
>
Changing the angle? Do you mean it opens and closes on a diagonal instead of
straight up and down, or something? If it's still using the same speed and
'duration', then how would the angle of the shutter make a difference?
Eldred
--
Dale Earnhardt, Sr. R.I.P. 1951-2001
Homepage - http://www.umich.edu/~epickett
GPLRank - under construction...
Never argue with an idiot. He brings you down to his level, then beats you
with experience...
Remove SPAM-OFF to reply.
Eldred,
I'm not sure how it works (will look into it), but by changing the angle
(opening or closing on a diagonal) it changes the entrance of light into the
camera. Sorry I don't have a better answer but I'll try and find one.
Chris G.
"EldredP" <[email hidden]> wrote in message
news:[email hidden]...
of
> straight up and down, or something? If it's still using the same speedand
you
> with experience...
> Remove SPAM-OFF to reply.
Quoted text (8 lines)
> In article <%XW88.19372$[email hidden]>, "cgenn27" > <[email hidden]> writes: > > >Actually the way they did the scenes In SPR was not changing speeds but > >chaging the angle of the shutter on the camera. > > > > Changing the angle? Do you mean it opens and closes on a diagonal insteadQuoted text (9 lines)
> 'duration', then how would the angle of the shutter make a difference? > > Eldred > -- > Dale Earnhardt, Sr. R.I.P. 1951-2001 > Homepage - http://www.umich.edu/~epickett > GPLRank - under construction... > > Never argue with an idiot. He brings you down to his level, then beatsIn article <Enc98.31549$[email hidden]>, "cgenn27"
<[email hidden]> writes:
Chris -
Don't bother looking for it just on MY account...<G> It was a cool effect,
though.
Eldred
--
Dale Earnhardt, Sr. R.I.P. 1951-2001
Homepage - http://www.umich.edu/~epickett
GPLRank - under construction...
Never argue with an idiot. He brings you down to his level, then beats you
with experience...
Remove SPAM-OFF to reply.


































