Gerry
If that's the red momo you can use this adapter:
http://tytlandsvik.no/momo/
There will be a terminator plugged into the adapter instead of the MS-Pedals
(the upper wire on the picture). As you can se the DC-power and an ordinary
USB cable is plug's into the adapter.
If you want to save a few bucks and modify your wire harness, you'll find
schematics at the bottom of the page.
--
Jone Tytlandsvik
http://tytlandsvik.no
> > I have got a set of BRD pedals which tun on there own USB port, but i
want
> > to remove the Momo ones on my Logitech system as they are in the way..
> daft
> > reason i know.
> > Basicly could i remove the pedal unti but keep the wires there.. maybe i
> > could put all the bits in a box or something..??
> If that's the red momo you can use this adapter:
> http://tytlandsvik.no/momo/
> There will be a terminator plugged into the adapter instead of the
MS-Pedals
> (the upper wire on the picture). As you can se the DC-power and an
ordinary
> USB cable is plug's into the adapter.
> If you want to save a few bucks and modify your wire harness, you'll find
> schematics at the bottom of the page.
> --
> Jone Tytlandsvik
> http://tytlandsvik.no
I did this - I opened up the pedal's box - unplugged the cables from the two
pots - then using the calibration program running in windows - tried to make
sure i got the wires of each pot connected together so they all were showing
zero. Then just taped them all into a little bundle and got rid of the
pedal box
Doug
