rec.autos.simulators

Make sure you've renamed your core.ini.sample to core.ini as well, or GPL
won't read it.

I also have GF2 Pro and this is the settings I have in my core.ini-

[ Int Profile Values ]
value3 = Direct3D7:D3DDevice:0                  ; do not change
value4 = Direct3D7:TossHighestMip:0             ; do not change
value5 = Direct3D7:DoubleMirrorResWidth:1       ; do not change
value6 = Direct3D7:DoubleMirrorResHeight:1      ; do not change
value7 = Direct3D7:DirectMirrorRendering:1      ; do not change
value8 = Direct3D7:DisableZBuffer:0             ; do not change
value9 = Direct3D7:AlphaThreshold:240           ; do not change
value10 = Direct3D7:TransparentMipsDrawOrder:0  ; do not change
value11 = Direct3D7:TrilinearFiltering:1        ; do not change
value12 = Direct3D7:AnisotropicFiltering:0      ; do not change
value13 = Direct3D7:LODBias:-50                 ; do not change

[ Direct3D7 ]
D3DDevice = 0
TossHighestMip = 0
DoubleMirrorResWidth = 1
DoubleMirrorResHeight = 1
DirectMirrorRendering = 1
DisableZBuffer = 0
AlphaThreshold = 1
TransparentMipsDrawOrder = 1
TrilinearFiltering = 1
AnisotropicFiltering = 8
LODBias = -50

Also, you may want to turn the detail slider bar in GPL to somewhere between
50% and 75%, depending on whether you run with 3d wheels or not (which are a
big drain).  That all depends on how many AI cars you race against, I like
to have >30 fps for race starts vs a full field.

--

Darrin Stevens
www.Stevens-Racing.com
www.TeamECR.com
www.SimRaceCar.com
www.Thomas-SuperWheel.com

Dave

Dave C.