Kendt
Thanks for the response Kendt.
The Config.ini file is set to Archive only. If I change resolution to
anything other than 800*600 in 3Dconfig, hit OK, close it, and then go
back into it without even running the game it will have reverted back to
800*600, Changes to the refresh rate will also not stick, it reverts back
to 56Hz, but a change to FSAA or Use Vertical Sync does stick.
Do you know what line in the Config.ini file (below) refers to the
resolution? Is it VIDEOMODE=25 ? Also, I'm using version 1.4 yet the last
line says version 1.0, is this the norm? Don
//[[gMa1.000f(c)2004 SBDT]] [[ ]]
[COMPONENTS]
SEASONDIR=GAMEDATA\
SOUNDDIR=GAMEDATA\SOUNDS\
VEHICLESOUND=GAMEDATA\SOUNDS\
OPTIONSANIM=UIDATA\MOVIES\
OPTIONSFLAGS=UIDATA\ICONS\
OPTIONSSOUNDS=UIDATA\UISOUNDS\
OPTIONSDIR=UIDATA\
REPLAYDIR=REPLAYDATA\
MOVIEDIR=MOVIEFILES\
TRACKSDIR=LOCATIONS\
PITSDIR=SCRIPTS\
VEHICLESDIR=TEAMS\
DRIVERSDIR=TALENT\
LOGDIR=USERDATA\LOG\
SAVEDIR=USERDATA\
MUSICDIR=MUSIC\
CAMERAEDITORRESOURCEDIR=DEVFILES\CAMED\
GRIDSIZE=50
CPURATING=4
SYSTEMRAM=768
VIDEORAM=181
OBJDETAIL=3
TEXDETAIL=3
VIDEOGUID=D7B71EE2-0D08-11CF-DB6A-0820A1C2CB35
VIDEODRIVER=0
VIDEOMODE=25
VIDEOREFRESH=5
WINDOWEDMODE=0
RUNBENCHMARKS=0
FSAA=0
VSYNC=0
VBSTRATEGY=0
[INSTALL]
INSTALLFROM=
INSTALLTO=
[VERSION]
VERSION=-1.000000
> Everything you describe is completely normal.
> Each time you open the "configurator" it fills in the DEFAULT
> 800x600x16 - this display is not relative to what is set in-game.
> If you started the actual sim... you would find that your settings are
> properly set there.
> Just run the config once - set your preferences and then go into the
> sim.
> Cheers
> ==--==
>>> Any chance your GTR config file is read-only? Does it change after
>>> you run 3Dconfig and then get forced back when you run the game?
>>> Kendt
>> Thanks for the response Kendt.
>> The Config.ini file is set to Archive only. If I change resolution to
>> anything other than 800*600 in 3Dconfig, hit OK, close it, and then
>> go back into it without even running the game it will have reverted
>> back to 800*600, Changes to the refresh rate will also not stick, it
>> reverts back to 56Hz, but a change to FSAA or Use Vertical Sync does
>> stick.
>> Do you know what line in the Config.ini file (below) refers to the
>> resolution? Is it VIDEOMODE=25 ? Also, I'm using version 1.4 yet the
>> last line says version 1.0, is this the norm? Don
Everything you describe is completely normal.
Each time you open the "configurator" it fills in the DEFAULT 800x600x16
- this display is not relative to what is set in-game.
If you started the actual sim... you would find that your settings are
properly set there.
Just run the config once - set your preferences and then go into the sim.
Cheers
==--==
>> Any chance your GTR config file is read-only? Does it change after you
>> run 3Dconfig and then get forced back when you run the game?
>> Kendt
> Thanks for the response Kendt.
> The Config.ini file is set to Archive only. If I change resolution to
> anything other than 800*600 in 3Dconfig, hit OK, close it, and then go
> back into it without even running the game it will have reverted back to
> 800*600, Changes to the refresh rate will also not stick, it reverts back
> to 56Hz, but a change to FSAA or Use Vertical Sync does stick.
> Do you know what line in the Config.ini file (below) refers to the
> resolution? Is it VIDEOMODE=25 ? Also, I'm using version 1.4 yet the last
> line says version 1.0, is this the norm? Don
> //[[gMa1.000f(c)2004 SBDT]] [[ ]]
> [COMPONENTS]
> SEASONDIR=GAMEDATA\
> SOUNDDIR=GAMEDATA\SOUNDS\
> VEHICLESOUND=GAMEDATA\SOUNDS\
> OPTIONSANIM=UIDATA\MOVIES\
> OPTIONSFLAGS=UIDATA\ICONS\
> OPTIONSSOUNDS=UIDATA\UISOUNDS\
> OPTIONSDIR=UIDATA\
> REPLAYDIR=REPLAYDATA\
> MOVIEDIR=MOVIEFILES\
> TRACKSDIR=LOCATIONS\
> PITSDIR=SCRIPTS\
> VEHICLESDIR=TEAMS\
> DRIVERSDIR=TALENT\
> LOGDIR=USERDATA\LOG\
> SAVEDIR=USERDATA\
> MUSICDIR=MUSIC\
> CAMERAEDITORRESOURCEDIR=DEVFILES\CAMED\
> GRIDSIZE=50
> CPURATING=4
> SYSTEMRAM=768
> VIDEORAM=181
> OBJDETAIL=3
> TEXDETAIL=3
> VIDEOGUID=D7B71EE2-0D08-11CF-DB6A-0820A1C2CB35
> VIDEODRIVER=0
> VIDEOMODE=25
> VIDEOREFRESH=5
> WINDOWEDMODE=0
> RUNBENCHMARKS=0
> FSAA=0
> VSYNC=0
> VBSTRATEGY=0
> [INSTALL]
> INSTALLFROM=
> INSTALLTO=
> [VERSION]
> VERSION=-1.000000
--
Richard "ZZ" Busch
[URL=http://gtr.gplrank.info/viewLaptimesbyUserId?user_id=14884]GTRank[/URL]
Member:
Screamers Racing League
oAo
AoA
MARA GTR
GT Rank +34.560
NGT Rank +37.765
GT Rank Monster +1163.777
GPL Rank + 14.768
MoGPL Rank + 308.654
N2003 Rank -18.8060
----------------
Remember racecar is racecar spelled backward
-----------------
<a
href="http://www.spreadfirefox.com/?q=affiliates&id=0&t=1">Get
Firefox!</a>
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
LOL Don - funnny!
Hope you enjoy GTR as much as I do..... once you get the bugs (real and
imagined) worked out. ;)
Cheers
Mike
==--==
>> I almost hate to be the one that tells you this.....
>> Everything you describe is completely normal.
>> Each time you open the "configurator" it fills in the DEFAULT
>> 800x600x16 - this display is not relative to what is set in-game.
>> If you started the actual sim... you would find that your settings are
>> properly set there.
>> Just run the config once - set your preferences and then go into the
>> sim.
>> Cheers
>> ==--==
>>>> Any chance your GTR config file is read-only? Does it change after
>>>> you run 3Dconfig and then get forced back when you run the game?
>>>> Kendt
>>> Thanks for the response Kendt.
>>> The Config.ini file is set to Archive only. If I change resolution to
>>> anything other than 800*600 in 3Dconfig, hit OK, close it, and then
>>> go back into it without even running the game it will have reverted
>>> back to 800*600, Changes to the refresh rate will also not stick, it
>>> reverts back to 56Hz, but a change to FSAA or Use Vertical Sync does
>>> stick.
>>> Do you know what line in the Config.ini file (below) refers to the
>>> resolution? Is it VIDEOMODE=25 ? Also, I'm using version 1.4 yet the
>>> last line says version 1.0, is this the norm? Don