Today the red button on my BRD sim pro stopped working - I took off the
wheel and stupidly disconnected the five wires on the circuit board (this
board
https://shop.interactiveracing.com/e-commerce/viewproduct.asp?Product... )
Yes I'm an idiot!
If anyone could tell me the combination and/or has any ideas why the button
would suddenly stop working, I'd greatly appreciate it. I ask the newsgroup
as it's the weekend and I can't wait until Monday to phone BRD!
Ian
I still need to know the combination...
Ian
https://shop.interactiveracing.com/e-commerce/viewproduct.asp?Product... )
looking at it with the frontside away from us, (so you can see the 2 small
microswitches that the paddles operate), top line left to right is as
follows: brown, white, red, notused.
bottom line is: yellow, black, green, not used.
hope that helps!
pez
> I still need to know the combination...
> Ian
> > Hi folks,
> > Today the red button on my BRD sim pro stopped working - I took off the
> > wheel and stupidly disconnected the five wires on the circuit board
(this
> > board
Ian
> looking at it with the frontside away from us, (so you can see the 2 small
> microswitches that the paddles operate), top line left to right is as
> follows: brown, white, red, notused.
> bottom line is: yellow, black, green, not used.
> hope that helps!
> pez
> > well I know one thing now, the button stopped working because one of the
> > wires simply snapped inside the wheel.
> > I still need to know the combination...
> > Ian
> > > Hi folks,
> > > Today the red button on my BRD sim pro stopped working - I took off
the
> > > wheel and stupidly disconnected the five wires on the circuit board
> (this
> > > board
Heyy Ian
As you connect the wires it's yellow, red, black, brown and green from
left to right (ehh, looking from the back side of the wheel). Just put
in a new pot in the wheel a week ago and I also got nice instructions
from BRD along with the pot... so there ya go, hope you get it
working!
- Greger
I had the same problem with wires. I spoke to BRD and it appears that there
are ump*** different wiring schemes depending on when it was made. I'm
afraid you'll have to wait to talk to BRD ;-((
Lee
> Ian
> > erm, ive got 6 wires on mine.
> > looking at it with the frontside away from us, (so you can see the 2
small
> > microswitches that the paddles operate), top line left to right is as
> > follows: brown, white, red, notused.
> > bottom line is: yellow, black, green, not used.
> > hope that helps!
> > pez
> > > well I know one thing now, the button stopped working because one of
the
> > > wires simply snapped inside the wheel.
> > > I still need to know the combination...
> > > Ian
> > > > Hi folks,
> > > > Today the red button on my BRD sim pro stopped working - I took off
> the
> > > > wheel and stupidly disconnected the five wires on the circuit board
> > (this
> > > > board
Ian
> I had the same problem with wires. I spoke to BRD and it appears that
there
> are ump*** different wiring schemes depending on when it was made. I'm
> afraid you'll have to wait to talk to BRD ;-((
> Lee
> > gosh Pez thanks so much for helping out, it seems ours is different as I
> > have a straight line of 5 pins, red green yellow brown black. I'll fix
> the
> > wire
> > that snapped and try to get hold of BRD on Monday, thanks again.
> > Ian
> > > erm, ive got 6 wires on mine.
> > > looking at it with the frontside away from us, (so you can see the 2
> small
> > > microswitches that the paddles operate), top line left to right is as
> > > follows: brown, white, red, notused.
> > > bottom line is: yellow, black, green, not used.
> > > hope that helps!
> > > pez
> > > > well I know one thing now, the button stopped working because one of
> the
> > > > wires simply snapped inside the wheel.
> > > > I still need to know the combination...
> > > > Ian
> > > > > Hi folks,
> > > > > Today the red button on my BRD sim pro stopped working - I took
off
> > the
> > > > > wheel and stupidly disconnected the five wires on the circuit
board
> > > (this
> > > > > board
> >Hi folks,
> >Today the red button on my BRD sim pro stopped working - I took off the
> >wheel and stupidly disconnected the five wires on the circuit board (this
> >board
>https://shop.interactiveracing.com/e-commerce/viewproduct.asp?Product...
)
> Heyy Ian
> As you connect the wires it's yellow, red, black, brown and green from
> left to right (ehh, looking from the back side of the wheel). Just put
> in a new pot in the wheel a week ago and I also got nice instructions
> from BRD along with the pot... so there ya go, hope you get it
> working!
> - Greger
Whatever you do, don't cut the Red One. I saw this in a
movie...you cut the Red One and BOOM!
dave henrie
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.422 / Virus Database: 237 - Release Date: 11/20/02
