There�s only one problem which i cannot solve:
My ECCI is on permanent split axis.So the brake is configured as "rudder
Control" on a seperate axis.
No problem with all Papy sims,but a problem with nearly all other sims.Why?
When the brake is released,the red bar in Windows calibration Test screen is
full.It�s going down when the brake is pressed.A lot of sims recognize the
seperate axis,but the don�t differ between a + / - .So what happens is,that
these sims see my break pressed while its released and the other way round.
So,what i need to do is to reverse the values of my brake pot.I didn�t find
a software solution til now.
One day i just switched the cables on the pot,but that did not help.
Are there any other ECCI / TSW users around who have discovered the same
problem?
With my CDS4000 I'm having exactly the same problem when using separate axes
for gas and brake. Gladly, I can switch to single axis, which doesn't give
me any problems.
Haven't found a solution for the split axis problem yet, but then again: I
haven't mailed ECCI about it. I suggest you do just that, I'm perfectly sure
they'll be able to solve it. They solve every problem, after all.
---
Joeri J. Cox
European Racing League - Taming The NASCAR Tracks Since April 2000
http://erl.racesimcentral.com
ERL is proudly sponsored by BallRacing Developments, Ltd.
http://www.interactiveracing.com
"Schuhhaus Wollenschein" <[email hidden]> schreef in bericht
news:ar5ape$2c5$05$[email hidden]...
> There�s only one problem which i cannot solve:
>
> My ECCI is on permanent split axis.So the brake is configured as "rudder
> Control" on a seperate axis.
>
> No problem with all Papy sims,but a problem with nearly all othersims.Why?
>
> When the brake is released,the red bar in Windows calibration Test screenis
> full.It�s going down when the brake is pressed.A lot of sims recognize the
> seperate axis,but the don�t differ between a + / - .So what happensis,that
> these sims see my break pressed while its released and the other wayround.
>
> So,what i need to do is to reverse the values of my brake pot.I didn�tfind
Quoted text (10 lines)
> a software solution til now. > > One day i just switched the cables on the pot,but that did not help. > > Are there any other ECCI / TSW users around who have discovered the same > problem? > > > >Hi Joeri,
I have mailed John about this problem,but he couldn�t help me.He suggested
to install the CDS to CDS4000 wiring upgrade.
Michael
"Joeri Cox" <[email hidden]> schrieb im Newsbeitrag
news:ar5rpa$k93$[email hidden]...
> With my CDS4000 I'm having exactly the same problem when using separateaxes
> for gas and brake. Gladly, I can switch to single axis, which doesn't give
> me any problems.
>
> Haven't found a solution for the split axis problem yet, but then again: I
> haven't mailed ECCI about it. I suggest you do just that, I'm perfectlysure
screen
> is
> > full.It�s going down when the brake is pressed.A lot of sims recognizethe
Quoted text (21 lines)
> they'll be able to solve it. They solve every problem, after all. > --- > Joeri J. Cox > > European Racing League - Taming The NASCAR Tracks Since April 2000 > http://erl.racesimcentral.com > > ERL is proudly sponsored by BallRacing Developments, Ltd. > http://www.interactiveracing.com > > "Schuhhaus Wollenschein" <[email hidden]> schreef in bericht > news:ar5ape$2c5$05$[email hidden]... > > There�s only one problem which i cannot solve: > > > > My ECCI is on permanent split axis.So the brake is configured as "rudder > > Control" on a seperate axis. > > > > No problem with all Papy sims,but a problem with nearly all other > sims.Why? > > > > When the brake is released,the red bar in Windows calibration TestQuoted text (19 lines)
> > seperate axis,but the don�t differ between a + / - .So what happens > is,that > > these sims see my break pressed while its released and the other way > round. > > > > So,what i need to do is to reverse the values of my brake pot.I didn�t > find > > a software solution til now. > > > > One day i just switched the cables on the pot,but that did not help. > > > > Are there any other ECCI / TSW users around who have discovered the same > > problem? > > > > > > > > > >Hmm that's weird, since I have the same problem with my CDS4000, so in dual
axis mode I guess your problem would not be solved with the upgrade.
---
Joeri J. Cox
European Racing League - Taming The NASCAR Tracks Since April 2000
http://erl.racesimcentral.com
ERL is proudly sponsored by BallRacing Developments, Ltd.
http://www.interactiveracing.com
"Michael Wollenschein" <[email hidden]> schreef in bericht
news:ar7lfk$agi$04$[email hidden]...
give
> > me any problems.
> >
> > Haven't found a solution for the split axis problem yet, but then again:I
"rudder
same
Quoted text (12 lines)
> Hi Joeri, > > I have mailed John about this problem,but he couldn�t help me.He suggested > to install the CDS to CDS4000 wiring upgrade. > > Michael > > "Joeri Cox" <[email hidden]> schrieb im Newsbeitrag > news:ar5rpa$k93$[email hidden]... > > With my CDS4000 I'm having exactly the same problem when using separate > axes > > for gas and brake. Gladly, I can switch to single axis, which doesn'tQuoted text (17 lines)
> > haven't mailed ECCI about it. I suggest you do just that, I'm perfectly > sure > > they'll be able to solve it. They solve every problem, after all. > > --- > > Joeri J. Cox > > > > European Racing League - Taming The NASCAR Tracks Since April 2000 > > http://erl.racesimcentral.com > > > > ERL is proudly sponsored by BallRacing Developments, Ltd. > > http://www.interactiveracing.com > > > > "Schuhhaus Wollenschein" <[email hidden]> schreef in bericht > > news:ar5ape$2c5$05$[email hidden]... > > > There�s only one problem which i cannot solve: > > > > > > My ECCI is on permanent split axis.So the brake is configured asQuoted text (22 lines)
> > > Control" on a seperate axis. > > > > > > No problem with all Papy sims,but a problem with nearly all other > > sims.Why? > > > > > > When the brake is released,the red bar in Windows calibration Test > screen > > is > > > full.It�s going down when the brake is pressed.A lot of sims recognize > the > > > seperate axis,but the don�t differ between a + / - .So what happens > > is,that > > > these sims see my break pressed while its released and the other way > > round. > > > > > > So,what i need to do is to reverse the values of my brake pot.I didn�t > > find > > > a software solution til now. > > > > > > One day i just switched the cables on the pot,but that did not help. > > > > > > Are there any other ECCI / TSW users around who have discovered theQuoted text (9 lines)
> > > problem? > > > > > > > > > > > > > > > > > >Hmm I just saw that in a mail you wrote me on July 9, this year, you told
that you'd just ordered this upgrade from John? Cancelled the order? :-)
---
Joeri J. Cox
European Racing League - Taming The NASCAR Tracks Since April 2000
http://erl.racesimcentral.com
ERL is proudly sponsored by BallRacing Developments, Ltd.
http://www.interactiveracing.com
"Michael Wollenschein" <[email hidden]> schreef in bericht
news:ar7lfk$agi$04$[email hidden]...
give
> > me any problems.
> >
> > Haven't found a solution for the split axis problem yet, but then again:I
"rudder
same
Quoted text (12 lines)
> Hi Joeri, > > I have mailed John about this problem,but he couldn�t help me.He suggested > to install the CDS to CDS4000 wiring upgrade. > > Michael > > "Joeri Cox" <[email hidden]> schrieb im Newsbeitrag > news:ar5rpa$k93$[email hidden]... > > With my CDS4000 I'm having exactly the same problem when using separate > axes > > for gas and brake. Gladly, I can switch to single axis, which doesn'tQuoted text (17 lines)
> > haven't mailed ECCI about it. I suggest you do just that, I'm perfectly > sure > > they'll be able to solve it. They solve every problem, after all. > > --- > > Joeri J. Cox > > > > European Racing League - Taming The NASCAR Tracks Since April 2000 > > http://erl.racesimcentral.com > > > > ERL is proudly sponsored by BallRacing Developments, Ltd. > > http://www.interactiveracing.com > > > > "Schuhhaus Wollenschein" <[email hidden]> schreef in bericht > > news:ar5ape$2c5$05$[email hidden]... > > > There�s only one problem which i cannot solve: > > > > > > My ECCI is on permanent split axis.So the brake is configured asQuoted text (22 lines)
> > > Control" on a seperate axis. > > > > > > No problem with all Papy sims,but a problem with nearly all other > > sims.Why? > > > > > > When the brake is released,the red bar in Windows calibration Test > screen > > is > > > full.It�s going down when the brake is pressed.A lot of sims recognize > the > > > seperate axis,but the don�t differ between a + / - .So what happens > > is,that > > > these sims see my break pressed while its released and the other way > > round. > > > > > > So,what i need to do is to reverse the values of my brake pot.I didn�t > > find > > > a software solution til now. > > > > > > One day i just switched the cables on the pot,but that did not help. > > > > > > Are there any other ECCI / TSW users around who have discovered theQuoted text (9 lines)
> > > problem? > > > > > > > > > > > > > > > > > >Hi Joeri,
yep ... cancelled the order as I was about to buy a MOMO as "2nd wheel" ..
;)
John�s suggestion was to upgrade and to use linked asis then for these sims.
Michael
"Joeri Cox" <[email hidden]> schrieb im Newsbeitrag
news:ar8jj3$6jj$[email hidden]...
suggested
separate
> > axes
> > > for gas and brake. Gladly, I can switch to single axis, which doesn't
> give
> > > me any problems.
> > >
> > > Haven't found a solution for the split axis problem yet, but thenagain:
> I
> > > haven't mailed ECCI about it. I suggest you do just that, I'mperfectly
recognize
didn�t
Quoted text (16 lines)
> Hmm I just saw that in a mail you wrote me on July 9, this year, you told > that you'd just ordered this upgrade from John? Cancelled the order? :-) > --- > Joeri J. Cox > > European Racing League - Taming The NASCAR Tracks Since April 2000 > http://erl.racesimcentral.com > > ERL is proudly sponsored by BallRacing Developments, Ltd. > http://www.interactiveracing.com > > "Michael Wollenschein" <[email hidden]> schreef in bericht > news:ar7lfk$agi$04$[email hidden]... > > Hi Joeri, > > > > I have mailed John about this problem,but he couldn�t help me.HeQuoted text (7 lines)
> > to install the CDS to CDS4000 wiring upgrade. > > > > Michael > > > > "Joeri Cox" <[email hidden]> schrieb im Newsbeitrag > > news:ar5rpa$k93$[email hidden]... > > > With my CDS4000 I'm having exactly the same problem when usingQuoted text (26 lines)
> > sure > > > they'll be able to solve it. They solve every problem, after all. > > > --- > > > Joeri J. Cox > > > > > > European Racing League - Taming The NASCAR Tracks Since April 2000 > > > http://erl.racesimcentral.com > > > > > > ERL is proudly sponsored by BallRacing Developments, Ltd. > > > http://www.interactiveracing.com > > > > > > "Schuhhaus Wollenschein" <[email hidden]> schreef in bericht > > > news:ar5ape$2c5$05$[email hidden]... > > > > There�s only one problem which i cannot solve: > > > > > > > > My ECCI is on permanent split axis.So the brake is configured as > "rudder > > > > Control" on a seperate axis. > > > > > > > > No problem with all Papy sims,but a problem with nearly all other > > > sims.Why? > > > > > > > > When the brake is released,the red bar in Windows calibration Test > > screen > > > is > > > > full.It�s going down when the brake is pressed.A lot of simsQuoted text (7 lines)
> > the > > > > seperate axis,but the don�t differ between a + / - .So what happens > > > is,that > > > > these sims see my break pressed while its released and the other way > > > round. > > > > > > > > So,what i need to do is to reverse the values of my brake pot.IQuoted text (18 lines)
> > > find > > > > a software solution til now. > > > > > > > > One day i just switched the cables on the pot,but that did not help. > > > > > > > > Are there any other ECCI / TSW users around who have discovered the > same > > > > problem? > > > > > > > > > > > > > > > > > > > > > > > > > > > >
Schuhhaus Wollenschein <[email hidden]> wrote in message
news:ar5ape$2c5$05$[email hidden]...
> There�s only one problem which i cannot solve:
>
> My ECCI is on permanent split axis.So the brake is configured as "rudder
> Control" on a seperate axis.
>
> No problem with all Papy sims,but a problem with nearly all othersims.Why?
>
> When the brake is released,the red bar in Windows calibration Test screenis
> full.It�s going down when the brake is pressed.A lot of sims recognize the
> seperate axis,but the don�t differ between a + / - .So what happensis,that
> these sims see my break pressed while its released and the other wayround.
>
> So,what i need to do is to reverse the values of my brake pot.I didn�tfind
I'm not a ECCI / TSW user, but I've done my share of pot wiring.
On your brake pot are there three terminals, of which only two are in use?
When you switched the cables, do you reconnect to the exact same two
terminals?
If you answered yes to both questions, you probably need to connect to the
currently unused terminal with one of the wires.
You will have a 50/50 chance of that getting the right wire. If you pick
the wrong wire to change what should happen is a consistant pedal reading no
matter how far the pedal is pressed.


































