Momo Racing FF wheel and Mobil 1 rally

Hi guys, Did anybody manage to make the game working with the wheel and split axis? Thanks in advance, Igor

Works for me...but I have no idea how I did it. "Igor" <[email hidden]> wrote in message news:Dveba.208541$[email hidden]...

Quoted text (8 lines)

> Hi guys, > > Did anybody manage to make the game working with the wheel and split axis? > > Thanks in advance, > Igor > >

Hi Steve, Please, try to recall. What type of the wheel you see in your controller setup? My only works if I set 2 axis+2 pedals and wheel reports as combined axis. Also, what strength of FF you set? Everything jumps on my table, even if I set the strength to 40%. /Igor "Steve Smith" <[email hidden]> wrote in message news:7Xjba.30186$[email hidden]...

Quoted text (7 lines)

> Works for me...but I have no idea how I did it. > > "Igor" <[email hidden]> wrote in message > news:Dveba.208541$[email hidden]... > > Hi guys, > > > > Did anybody manage to make the game working with the wheel and split

axis?

Quoted text (7 lines)

> > > > Thanks in advance, > > Igor > > > > > >

On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]> wrote:

Quoted text (9 lines)

>Hi Steve, > >Please, try to recall. > >What type of the wheel you see in your controller setup? >My only works if I set 2 axis+2 pedals and wheel reports as combined axis. > >Also, what strength of FF you set? >Everything jumps on my table, even if I set the strength to 40%.

I had a similar problem with my Microsoft Sidewinder wheel. There are codes you can enter in the ral.cfg for specific wheel types that sort out the split axis problems. Unfortunately I don't have them handy. =/ Jason

Any Idea where can I find these codes? "Jason Moyer" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (8 lines)

> On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]> wrote: > > >Hi Steve, > > > >Please, try to recall. > > > >What type of the wheel you see in your controller setup? > >My only works if I set 2 axis+2 pedals and wheel reports as combined

axis.

Quoted text (11 lines)

> > > >Also, what strength of FF you set? > >Everything jumps on my table, even if I set the strength to 40%. > > I had a similar problem with my Microsoft Sidewinder wheel. > > There are codes you can enter in the ral.cfg for specific wheel types > that sort out the split axis problems. Unfortunately I don't have > them handy. =/ > > Jason

This my rally.cfg: -------------------- ;Configuration file for Rally Championship 2000 (c) by Magnetic Fields fizpatch=1; physics switch nofmv=1; do not show the intro avi�s noreplay=0; do not record replays logfile=1; do not create a log file patchbrakegrip=85 patchaccelgrip=125 patchslidegrip=105 patchgriptarmac=100 patchgripgravel=75 patchgripmud=65 patchgripsnow=60 patchgripgrass=50 sparksmode=1; display yellow sparks patchmaxdrawdistance=16; set objects drawing distance ------------------- "Igor" <[email hidden]> wrote in message news:1Voba.28840$[email hidden]...

Quoted text (26 lines)

> Any Idea where can I find these codes? > > "Jason Moyer" <[email hidden]> wrote in message > news:[email hidden]... > > On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]> wrote: > > > > >Hi Steve, > > > > > >Please, try to recall. > > > > > >What type of the wheel you see in your controller setup? > > >My only works if I set 2 axis+2 pedals and wheel reports as combined > axis. > > > > > >Also, what strength of FF you set? > > >Everything jumps on my table, even if I set the strength to 40%. > > > > I had a similar problem with my Microsoft Sidewinder wheel. > > > > There are codes you can enter in the ral.cfg for specific wheel types > > that sort out the split axis problems. Unfortunately I don't have > > them handy. =/ > > > > Jason > >

Thanks. I'll try. But what in this file relates to the wheel? How do you see your wheel in the controller setup? "Steve Smith" <[email hidden]> wrote in message news:dLrba.12017$[email hidden]...

Quoted text (48 lines)

> This my rally.cfg: > -------------------- > ;Configuration file for Rally Championship 2000 (c) by Magnetic Fields > fizpatch=1; physics switch > nofmv=1; do not show the intro avi�s > noreplay=0; do not record replays > logfile=1; do not create a log file > patchbrakegrip=85 > patchaccelgrip=125 > patchslidegrip=105 > patchgriptarmac=100 > patchgripgravel=75 > patchgripmud=65 > patchgripsnow=60 > patchgripgrass=50 > sparksmode=1; display yellow sparks > patchmaxdrawdistance=16; set objects drawing distance > ------------------- > "Igor" <[email hidden]> wrote in message > news:1Voba.28840$[email hidden]... > > Any Idea where can I find these codes? > > > > "Jason Moyer" <[email hidden]> wrote in message > > news:[email hidden]... > > > On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]> wrote: > > > > > > >Hi Steve, > > > > > > > >Please, try to recall. > > > > > > > >What type of the wheel you see in your controller setup? > > > >My only works if I set 2 axis+2 pedals and wheel reports as combined > > axis. > > > > > > > >Also, what strength of FF you set? > > > >Everything jumps on my table, even if I set the strength to 40%. > > > > > > I had a similar problem with my Microsoft Sidewinder wheel. > > > > > > There are codes you can enter in the ral.cfg for specific wheel types > > > that sort out the split axis problems. Unfortunately I don't have > > > them handy. =/ > > > > > > Jason > > > > > >

Actually, this *isn't* my particular rally.cfg, but you can see the possibilities. Plus there are a couple of more lines avail, viz.: dontrunoutoftime=1 noautoneutral=1; don�t engage neutral after crash sensiblesaving=1; save between stages BTW, I don't remember any indication that the controler axes were set/modified here. "Steve Smith" <[email hidden]> wrote in message news:dLrba.12017$[email hidden]...

Quoted text (48 lines)

> This my rally.cfg: > -------------------- > ;Configuration file for Rally Championship 2000 (c) by Magnetic Fields > fizpatch=1; physics switch > nofmv=1; do not show the intro avi�s > noreplay=0; do not record replays > logfile=1; do not create a log file > patchbrakegrip=85 > patchaccelgrip=125 > patchslidegrip=105 > patchgriptarmac=100 > patchgripgravel=75 > patchgripmud=65 > patchgripsnow=60 > patchgripgrass=50 > sparksmode=1; display yellow sparks > patchmaxdrawdistance=16; set objects drawing distance > ------------------- > "Igor" <[email hidden]> wrote in message > news:1Voba.28840$[email hidden]... > > Any Idea where can I find these codes? > > > > "Jason Moyer" <[email hidden]> wrote in message > > news:[email hidden]... > > > On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]> wrote: > > > > > > >Hi Steve, > > > > > > > >Please, try to recall. > > > > > > > >What type of the wheel you see in your controller setup? > > > >My only works if I set 2 axis+2 pedals and wheel reports as combined > > axis. > > > > > > > >Also, what strength of FF you set? > > > >Everything jumps on my table, even if I set the strength to 40%. > > > > > > I had a similar problem with my Microsoft Sidewinder wheel. > > > > > > There are codes you can enter in the ral.cfg for specific wheel types > > > that sort out the split axis problems. Unfortunately I don't have > > > them handy. =/ > > > > > > Jason > > > > > >

HI Jason, I can't find ral.cfg or rally cfg file in the game folders. Where to look? "Jason Moyer" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (8 lines)

> On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]> wrote: > > >Hi Steve, > > > >Please, try to recall. > > > >What type of the wheel you see in your controller setup? > >My only works if I set 2 axis+2 pedals and wheel reports as combined

axis.

Quoted text (11 lines)

> > > >Also, what strength of FF you set? > >Everything jumps on my table, even if I set the strength to 40%. > > I had a similar problem with my Microsoft Sidewinder wheel. > > There are codes you can enter in the ral.cfg for specific wheel types > that sort out the split axis problems. Unfortunately I don't have > them handy. =/ > > Jason

Here what I found: http://home.no.net/rally/pages/config.shtml "Steve Smith" <[email hidden]> wrote in message news:htsba.12031$[email hidden]...

Quoted text (37 lines)

> Actually, this *isn't* my particular rally.cfg, but you can see the > possibilities. Plus there are a couple of more lines avail, viz.: > > dontrunoutoftime=1 > noautoneutral=1; don�t engage neutral after crash > sensiblesaving=1; save between stages > > BTW, I don't remember any indication that the controler axes were > set/modified here. > > "Steve Smith" <[email hidden]> wrote in message > news:dLrba.12017$[email hidden]... > > This my rally.cfg: > > -------------------- > > ;Configuration file for Rally Championship 2000 (c) by Magnetic Fields > > fizpatch=1; physics switch > > nofmv=1; do not show the intro avi�s > > noreplay=0; do not record replays > > logfile=1; do not create a log file > > patchbrakegrip=85 > > patchaccelgrip=125 > > patchslidegrip=105 > > patchgriptarmac=100 > > patchgripgravel=75 > > patchgripmud=65 > > patchgripsnow=60 > > patchgripgrass=50 > > sparksmode=1; display yellow sparks > > patchmaxdrawdistance=16; set objects drawing distance > > ------------------- > > "Igor" <[email hidden]> wrote in message > > news:1Voba.28840$[email hidden]... > > > Any Idea where can I find these codes? > > > > > > "Jason Moyer" <[email hidden]> wrote in message > > > news:[email hidden]... > > > > On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]>

wrote:

Quoted text (7 lines)

> > > > > > > > >Hi Steve, > > > > > > > > > >Please, try to recall. > > > > > > > > > >What type of the wheel you see in your controller setup? > > > > >My only works if I set 2 axis+2 pedals and wheel reports as

combined

Quoted text (8 lines)

> > > axis. > > > > > > > > > >Also, what strength of FF you set? > > > > >Everything jumps on my table, even if I set the strength to 40%. > > > > > > > > I had a similar problem with my Microsoft Sidewinder wheel. > > > > > > > > There are codes you can enter in the ral.cfg for specific wheel

types

Quoted text (10 lines)

> > > > that sort out the split axis problems. Unfortunately I don't have > > > > them handy. =/ > > > > > > > > Jason > > > > > > > > > > > >

Igor, Wow! There's a lot more to ral.cfg than I thought. As to where to find/put it, the last paragraph sez: <<In order to send control commands to RC that you can't set within the game, there's a file called ral.cfg in which you can put these commands. It's located in the var folder under the RC installation root (typically c:\rc\var). If it doesn't exist, you can easily create it yourself. Open Windows Notepad, and write the commands you want on separate lines.>> [N.B. Notice that, by default, RC does *not* install itself under Program Files but in the root directory.] There is a ralwiz.exe floating around somewhere, but you don't need it. Just creating a textfile (like the one I quoted above) oughtta do the trick. --Steve "Igor" <[email hidden]> wrote in message news:eyxba.1411$[email hidden]...

Quoted text (29 lines)

> HI Jason, > > I can't find ral.cfg or rally cfg file in the game folders. > Where to look? > > "Jason Moyer" <[email hidden]> wrote in message > news:[email hidden]... > > On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]> wrote: > > > > >Hi Steve, > > > > > >Please, try to recall. > > > > > >What type of the wheel you see in your controller setup? > > >My only works if I set 2 axis+2 pedals and wheel reports as combined > axis. > > > > > >Also, what strength of FF you set? > > >Everything jumps on my table, even if I set the strength to 40%. > > > > I had a similar problem with my Microsoft Sidewinder wheel. > > > > There are codes you can enter in the ral.cfg for specific wheel types > > that sort out the split axis problems. Unfortunately I don't have > > them handy. =/ > > > > Jason > >

Something strange happens. I didn't have the cfg file at all. So I created the file. The strange thing is that the game does react on some settings like "nofmv" but does not react on any settings related to the wheel setup (like joymode=3, alt2axcode or joycode). What can be wrong? What do you have in your controller axis mode setup in the game? "3 axis+ pedals" or "2 axis + pedals?" I think I put the latest patch 6. Probably I have wrong patch? Where to find the right one? Any help will be very appreciated. /Igor "Steve Smith" <[email hidden]> wrote in message news:Ytyba.5282$[email hidden]... > Igor, > > Wow! There's a lot more to ral.cfg than I thought. As to where tofind/put

Quoted text (13 lines)

> it, the last paragraph sez: > > <<In order to send control commands to RC that you can't set within the > game, there's a file called ral.cfg in which you can put these commands. > It's located in the var folder under the RC installation root (typically > c:\rc\var). If it doesn't exist, you can easily create it yourself. Open > Windows Notepad, and write the commands you want on separate lines.>> > > [N.B. Notice that, by default, RC does *not* install itself under Program > Files but in the root directory.] > > There is a ralwiz.exe floating around somewhere, but you don't need it. > Just creating a textfile (like the one I quoted above) oughtta do the

trick.

Quoted text (36 lines)

> > --Steve > > "Igor" <[email hidden]> wrote in message > news:eyxba.1411$[email hidden]... > > HI Jason, > > > > I can't find ral.cfg or rally cfg file in the game folders. > > Where to look? > > > > "Jason Moyer" <[email hidden]> wrote in message > > news:[email hidden]... > > > On Tue, 11 Mar 2003 09:23:30 -0500, "Igor" <[email hidden]> wrote: > > > > > > >Hi Steve, > > > > > > > >Please, try to recall. > > > > > > > >What type of the wheel you see in your controller setup? > > > >My only works if I set 2 axis+2 pedals and wheel reports as combined > > axis. > > > > > > > >Also, what strength of FF you set? > > > >Everything jumps on my table, even if I set the strength to 40%. > > > > > > I had a similar problem with my Microsoft Sidewinder wheel. > > > > > > There are codes you can enter in the ral.cfg for specific wheel types > > > that sort out the split axis problems. Unfortunately I don't have > > > them handy. =/ > > > > > > Jason > > > > > >