Race Sim Central
Rec.Autos.Simulators Archive

N2K3 Crashes to desktop

8 posts by 4 people · 03 May 2003 01:47 UTC - 04 May 2003 00:35 UTC

John Gog 03 May 2003 01:47 UTC#69252
I've seen a few other reports of this, but I haven't seen any kind of solution, so here's my little saga. The system: AMD Athalon 1.533 GHz 768 MB RAM ATI-powered 9500 card, Catalyst 3.2 drivers I recently upgraded my machine to the above configuration. N2K3 was running fine until then. Now it will occasionally crash in the middle of a race, dropping back to the desktop. The only thing I've noticed is that it seems more likely to do this if I make a lot of adjustments in the garage (going back and forth from a practice session to get the setup right). I've upgraded the power supply and added a fan. Temperatures are fine, so I don't think this is a hardware issue of that nature. Any suggestions?
[email hidden] (John Gog) wrote in news:[email hidden]:
Quoted text (22 lines)> I've seen a few other reports of this, but I haven't seen any kind of > solution, so here's my little saga. > > The system: > > AMD Athalon 1.533 GHz > 768 MB RAM > ATI-powered 9500 card, Catalyst 3.2 drivers > > I recently upgraded my machine to the above configuration. N2K3 was > running fine until then. Now it will occasionally crash in the middle > of a race, dropping back to the desktop. The only thing I've noticed is > that it seems more likely to do this if I make a lot of adjustments in > the garage (going back and forth from a practice session to get the > setup right). > > I've upgraded the power supply and added a fan. Temperatures are fine, > so I don't think this is a hardware issue of that nature. > > Any suggestions? > >
What OS are you using? ARe you overclocking your vid card or the FSB(front side bus?) And are you using D3d or Ogl and what version of Direct X do you have installed? dave henrie
Mine does the same thing Didnt do it with my PIII, upgraded to a Athlon 2500 XP 512cache, 512 DDR400 RAM and now it does it. Nforce2 chips, OS WIN 98, DX 9a Everything has latest drivers. Tried turning down DX sound acceleration, no joy. Not overclocking anything. - Paul
same here see all my previous post about it, "Paul D. Yuknis" <[email hidden]> wrote in message news:7ANsa.452937$OV.438851@rwcrnsc54...
Quoted text (18 lines)> Mine does the same thing > > Didnt do it with my PIII, upgraded to a Athlon > 2500 XP 512cache, 512 DDR400 RAM > > and now it does it. > > Nforce2 chips, OS WIN 98, DX 9a > > Everything has latest drivers. > > Tried turning down DX sound acceleration, no joy. > > Not overclocking anything. > > - Paul > >
On May 03 2003, Dave Henrie <[email hidden]> wrote: > What OS are you using? Wups, forgot the obvious...Windows 2000 SP3 > ARe you overclocking your vid card or the > FSB(front side bus?) Nope and nope. > And are you using D3d or Ogl and what version of Direct X do you have > installed? Using D3D, DirectX 9.0a.
John Gog 03 May 2003 21:03 UTC#530814
Wups, forgot the obvious...Windows 2000 SP3 Nope and nope. Using D3D, DirectX 9.0a.
On May 03 2003, "Paul D. Yuknis" <[email hidden]> wrote:
Quoted text (14 lines)> Mine does the same thing > > Didnt do it with my PIII, upgraded to a Athlon > 2500 XP 512cache, 512 DDR400 RAM > > and now it does it. > > Nforce2 chips, OS WIN 98, DX 9a > > Everything has latest drivers. > > Tried turning down DX sound acceleration, no joy. > > Not overclocking anything.
Yeah, I've seen a number of posts on it, too. Usually it's laid out to overheating or something on that order. I did, in fact, have some power issues which caused reboots of the entire system, which is why I upgraded the power supply and added a fan. The only thing I haven't done is completely reinstall N2K3, which I'll probably end up doing.
[email hidden] (John Gog) wrote in news:[email hidden]:
Quoted text (15 lines)> On May 03 2003, Dave Henrie <[email hidden]> wrote: > >> What OS are you using? > Wups, forgot the obvious...Windows 2000 SP3 > >> ARe you overclocking your vid card or the >> FSB(front side bus?) > > Nope and nope. > >> And are you using D3d or Ogl and what version of Direct X do you have >> installed? > Using D3D, DirectX 9.0a. > >
I had a thought....dingdingding!!! while working today. Many of the people with problems claimed they formatted their hard drive. But what does a windows-based format do? AFAIK it only wipes the table of contents. To really clear out the files you'd need to run a low-level format, which usually can only be done with a dos boot disk(feel free anyone to correct me) I would assume only Fdisk or using a Hard drive Utility in dos would truly wipe a drive clean. Could lost files on a harddrive still cause driver conflicts? See, I had a thought, I didn't have an answer. dave henrie

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy