Momo and Act labs Pedals N2003

I got tired of using the Momo pedals and after waiting 9 months for ActLabs to send me replacement springs I finally got the Performance pedals working again. Well, kind of. They work in GPL, F12002, hell just about everything but N2003. I know they should work but they don't. Using two different machines, one with XP Pro and the ohter Win98. Odd thing is in the control panel where it list the Momo in the number 2 slot, nothing in the number 1 slot. But if you try to move the Momo there you get a slot occupied message. Anyhow, anybody go throught the same thing? Greg

Greg, This may be insulting your intelligence, and if so, I apologize, but I have a Momo with a set of BRD Speed 7 pedals, and I didn't think they were recognized in N2003 either. Then when I was in the sim's calibration screen I noticed a forward arrow at the bottom of the screen. Low and behold, I could calibrate my pedals on axis 4 & 5, I believe it is. HTH, Bob "Gavel" <[email hidden]> wrote in message news:[email hidden]... > I got tired of using the Momo pedals and after waiting 9 months forActLabs > to send me replacement springs I finally got the Performance pedalsworking

Quoted text (10 lines)

> again. Well, kind of. They work in GPL, F12002, hell just about everything > but N2003. I know they should work but they don't. > Using two different machines, one with XP Pro and the ohter Win98. > Odd thing is in the control panel where it list the Momo in the number 2 > slot, nothing in the number 1 slot. But if you try to move the Momo there > you get a slot occupied message. > Anyhow, anybody go throught the same thing? > Greg > >

Oh, one more thing, in your Logitech Profiler, click on Global Profiler Settings. Under General Behavior, make sure that "Switch selected device to ID 1" is checked. "Bob G" <[email hidden]> wrote in message news:b77Ka.6206$[email hidden]... > Greg, > > This may be insulting your intelligence, and if so, I apologize, but Ihave > a Momo with a set of BRD Speed 7 pedals, and I didn't think they were > recognized in N2003 either. Then when I was in the sim's calibrationscreen

Quoted text (12 lines)

> I noticed a forward arrow at the bottom of the screen. Low and behold, I > could calibrate my pedals on axis 4 & 5, I believe it is. > > HTH, > Bob > "Gavel" <[email hidden]> wrote in message > news:[email hidden]... > > I got tired of using the Momo pedals and after waiting 9 months for > ActLabs > > to send me replacement springs I finally got the Performance pedals > working > > again. Well, kind of. They work in GPL, F12002, hell just about

everything > > but N2003. I know they should work but they don't. > > Using two different machines, one with XP Pro and the ohter Win98. > > Odd thing is in the control panel where it list the Momo in the number2 > > slot, nothing in the number 1 slot. But if you try to move the Momothere

Quoted text (7 lines)

> > you get a slot occupied message. > > Anyhow, anybody go throught the same thing? > > Greg > > > > > >

Does the Perf pedals show up in windows control panel ID2 as "Act Labs pefromance pedals"? If so then be sure to use the forward arrow at the bottom of the N2003 calib screen after you calibrate your wheel axis. Next page so to speak. Mitch "Gavel" <[email hidden]> wrote in message news:[email hidden]... > I got tired of using the Momo pedals and after waiting 9 months forActLabs > to send me replacement springs I finally got the Performance pedalsworking

Quoted text (10 lines)

> again. Well, kind of. They work in GPL, F12002, hell just about everything > but N2003. I know they should work but they don't. > Using two different machines, one with XP Pro and the ohter Win98. > Odd thing is in the control panel where it list the Momo in the number 2 > slot, nothing in the number 1 slot. But if you try to move the Momo there > you get a slot occupied message. > Anyhow, anybody go throught the same thing? > Greg > >

Thanks Bob. Still can't get it to work.:( "Bob G" <[email hidden]> wrote in message news:Hc7Ka.6209$[email hidden]... > Oh, one more thing, in your Logitech Profiler, click on Global Profiler > Settings. Under General Behavior, make sure that "Switch selected deviceto

Quoted text (13 lines)

> ID 1" is checked. > > > "Bob G" <[email hidden]> wrote in message > news:b77Ka.6206$[email hidden]... > > Greg, > > > > This may be insulting your intelligence, and if so, I apologize, but I > have > > a Momo with a set of BRD Speed 7 pedals, and I didn't think they were > > recognized in N2003 either. Then when I was in the sim's calibration > screen > > I noticed a forward arrow at the bottom of the screen. Low and behold,

I

Quoted text (15 lines)

> > could calibrate my pedals on axis 4 & 5, I believe it is. > > > > HTH, > > Bob > > "Gavel" <[email hidden]> wrote in message > > news:[email hidden]... > > > I got tired of using the Momo pedals and after waiting 9 months for > > ActLabs > > > to send me replacement springs I finally got the Performance pedals > > working > > > again. Well, kind of. They work in GPL, F12002, hell just about > everything > > > but N2003. I know they should work but they don't. > > > Using two different machines, one with XP Pro and the ohter Win98. > > > Odd thing is in the control panel where it list the Momo in the

number

Quoted text (12 lines)

> 2 > > > slot, nothing in the number 1 slot. But if you try to move the Momo > there > > > you get a slot occupied message. > > > Anyhow, anybody go throught the same thing? > > > Greg > > > > > > > > > > > >

The Perf pedals don't show up at all. There's not a selection for them in the "add a device" either. Makes me think that they have to be installed seperately. I have a Force RS wheel but I like the Momo wheel better. Greg "Mitch_A" <[email hidden]> wrote in message news:2r7Ka.3429$[email hidden]... > Does the Perf pedals show up in windows control panel ID2 as "Act Labs > pefromance pedals"? If so then be sure to use the forward arrow at the > bottom of the N2003 calib screen after you calibrate your wheel axis.Next

Quoted text (12 lines)

> page so to speak. > > Mitch > > > "Gavel" <[email hidden]> wrote in message > news:[email hidden]... > > I got tired of using the Momo pedals and after waiting 9 months for > ActLabs > > to send me replacement springs I finally got the Performance pedals > working > > again. Well, kind of. They work in GPL, F12002, hell just about

everything > > but N2003. I know they should work but they don't. > > Using two different machines, one with XP Pro and the ohter Win98. > > Odd thing is in the control panel where it list the Momo in the number2 > > slot, nothing in the number 1 slot. But if you try to move the Momothere

Quoted text (7 lines)

> > you get a slot occupied message. > > Anyhow, anybody go throught the same thing? > > Greg > > > > > >

If this is a Win98 install then disregard nearly everything Ive said and UPGRADE your OS... IIRC the pedals show up as an HID device in 98. I dont remember. If not then... If the pedals dont show up in control panel/game controller then thats the first clue its something pedal specific. Did you possibly damage a wire when replacing the springs? I have the Momo and Perf pedals and they do work together. You do need your Momo pedals attached to your wheel (not insulting your intel btw G) and your perf pedals plugged into a seperate USB port. One other note, I had some problems on a USB hub, but it was pretty cheesy hub. Try direct to ports. Mitch "Gavel" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (26 lines)

> The Perf pedals don't show up at all. There's not a selection for them in > the "add a device" either. Makes me think that they have to be installed > seperately. I have a Force RS wheel but I like the Momo wheel better. > Greg > "Mitch_A" <[email hidden]> wrote in message > news:2r7Ka.3429$[email hidden]... > > Does the Perf pedals show up in windows control panel ID2 as "Act Labs > > pefromance pedals"? If so then be sure to use the forward arrow at the > > bottom of the N2003 calib screen after you calibrate your wheel axis. > Next > > page so to speak. > > > > Mitch > > > > > > "Gavel" <[email hidden]> wrote in message > > news:[email hidden]... > > > I got tired of using the Momo pedals and after waiting 9 months for > > ActLabs > > > to send me replacement springs I finally got the Performance pedals > > working > > > again. Well, kind of. They work in GPL, F12002, hell just about > everything > > > but N2003. I know they should work but they don't. > > > Using two different machines, one with XP Pro and the ohter Win98. > > > Odd thing is in the control panel where it list the Momo in the

number

Quoted text (12 lines)

> 2 > > > slot, nothing in the number 1 slot. But if you try to move the Momo > there > > > you get a slot occupied message. > > > Anyhow, anybody go throught the same thing? > > > Greg > > > > > > > > > > > >

They work in everything but N2003 without showing up in the control panel applet. I have another drive with XP Pro on it and it's the same thing, I'll keep trying stuff. Thanks for the ideas. Greg "Mitch_A" <[email hidden]> wrote in message news:OYaKa.1068$[email hidden]... > If this is a Win98 install then disregard nearly everything Ive said and > UPGRADE your OS... IIRC the pedals show up as an HID device in 98. Idont

Quoted text (9 lines)

> remember. > > If not then... > > If the pedals dont show up in control panel/game controller then thats the > first clue its something pedal specific. Did you possibly damage a wire > when replacing the springs? > > I have the Momo and Perf pedals and they do work together. You do need

your > Momo pedals attached to your wheel (not insulting your intel btw G) andyour

Quoted text (10 lines)

> perf pedals plugged into a seperate USB port. One other note, I had some > problems on a USB hub, but it was pretty cheesy hub. Try direct to ports. > > Mitch > > > > "Gavel" <[email hidden]> wrote in message > news:[email hidden]... > > The Perf pedals don't show up at all. There's not a selection for them

in

Quoted text (7 lines)

> > the "add a device" either. Makes me think that they have to be installed > > seperately. I have a Force RS wheel but I like the Momo wheel better. > > Greg > > "Mitch_A" <[email hidden]> wrote in message > > news:2r7Ka.3429$[email hidden]... > > > Does the Perf pedals show up in windows control panel ID2 as "Act Labs > > > pefromance pedals"? If so then be sure to use the forward arrow at

the

Quoted text (33 lines)

> > > bottom of the N2003 calib screen after you calibrate your wheel axis. > > Next > > > page so to speak. > > > > > > Mitch > > > > > > > > > "Gavel" <[email hidden]> wrote in message > > > news:[email hidden]... > > > > I got tired of using the Momo pedals and after waiting 9 months for > > > ActLabs > > > > to send me replacement springs I finally got the Performance pedals > > > working > > > > again. Well, kind of. They work in GPL, F12002, hell just about > > everything > > > > but N2003. I know they should work but they don't. > > > > Using two different machines, one with XP Pro and the ohter Win98. > > > > Odd thing is in the control panel where it list the Momo in the > number > > 2 > > > > slot, nothing in the number 1 slot. But if you try to move the Momo > > there > > > > you get a slot occupied message. > > > > Anyhow, anybody go throught the same thing? > > > > Greg > > > > > > > > > > > > > > > > > > > >

"Gavel" <[email hidden]> wrote in news:[email hidden]:

Quoted text (7 lines)

> They work in everything but N2003 without showing up in the control > panel > applet. I have another drive with XP Pro on it and it's the same > thing, I'll keep trying stuff. Thanks for the ideas. > Greg >

Are you looking for the second page of controller axis' in nr2k3? Should be an arrow icon near the bottom of the configure screen. dave henrie

That's the thing, there's no arrow in N2003. There is in GPL though. Greg "Dave Henrie" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (14 lines)

> "Gavel" <[email hidden]> wrote in > news:[email hidden]: > > > They work in everything but N2003 without showing up in the control > > panel > > applet. I have another drive with XP Pro on it and it's the same > > thing, I'll keep trying stuff. Thanks for the ideas. > > Greg > > > > > Are you looking for the second page of controller axis' in nr2k3? > Should be an arrow icon near the bottom of the configure screen. > dave henrie