I thought I'd try one of these adaptors from radio shack on the hope of
eliminating my santacruz, which is in a gameport-less NF7-S v2.0
motherboard, with an old T2 wheel.
Anyway, it does work, all the axes are recognized in XP and GPL and
calibrate, the problem is the response is very ratchety with major
deadzones, and is more or less unusable in the game. Does anyone have tips
on getting this to work properly, or should I give up?
Also, is there any Abit accessory connector that would add a gameport? thx!
rms
I have tried the Radio Shack one as well and it is far too stepped to be
usable.
"Roger Squires" <[email hidden]> wrote in message
news:2LLKa.167$[email hidden]...
tips
> on getting this to work properly, or should I give up?
>
> Also, is there any Abit accessory connector that would add a gameport?thx!
>
> rms
>
>
Quoted text (7 lines)
> I thought I'd try one of these adaptors from radio shack on the hope of > eliminating my santacruz, which is in a gameport-less NF7-S v2.0 > motherboard, with an old T2 wheel. > > Anyway, it does work, all the axes are recognized in XP and GPL and > calibrate, the problem is the response is very ratchety with major > deadzones, and is more or less unusable in the game. Does anyone haveI think I found the perfect solution, just leave the turtlebeach installed
for the gameport, but enable the nf7-s nforce2 sound device also, and use
the nforce2 for sound output.
All that's needed is to choose the nforce2 as the output device in control
panel.
Doing this gave a *dramatic* speedup in GPL! I went from 30fps at the back
of a full-field start with the santacruz (detail sliders all maxed,
1280x1024) to 33fps with nforce2. That is a remarkable improvement from
simply switching soundcards. I haven't ran 3dmark to check sound fps there,
but I imagine they are similarly faster.
The nforce2 sound quality is the same or better in GPL. I also tried the
old game Outlaws, and it appears my beloved Sensaura is not supported by
nforce2. So its doubly good that I now have the option of switching between
the two soundcards.
rms
I got the same bad results from the unit at Radio Shack with my TSW2.
However, I purchased the one from TSW and it's solid and smooth.
Although it is sold by TSW, I assume it would work fine with other
controllers as well as it has 4 different modes.
On Thu, 26 Jun 2003 23:56:46 GMT, "Roger Squires" <[email hidden]>
wrote:
Quoted text (13 lines)
>I thought I'd try one of these adaptors from radio shack on the hope of >eliminating my santacruz, which is in a gameport-less NF7-S v2.0 >motherboard, with an old T2 wheel. > >Anyway, it does work, all the axes are recognized in XP and GPL and >calibrate, the problem is the response is very ratchety with major >deadzones, and is more or less unusable in the game. Does anyone have tips >on getting this to work properly, or should I give up? > >Also, is there any Abit accessory connector that would add a gameport? thx! > >rms >
"Roger Squires" <[email hidden]> wrote in message
news:KiNKa.5305$[email hidden]...
back
> of a full-field start with the santacruz (detail sliders all maxed,
> 1280x1024) to 33fps with nforce2. That is a remarkable improvement from
> simply switching soundcards. I haven't ran 3dmark to check sound fpsthere,
> but I imagine they are similarly faster.
>
> The nforce2 sound quality is the same or better in GPL. I also tried the
> old game Outlaws, and it appears my beloved Sensaura is not supported by
> nforce2. So its doubly good that I now have the option of switchingbetween
> the two soundcards.
>
> rms
>
>
That solution also means that programmable devices are suported, and if the
Nforce2 mic input is crap you have alternative!
Quoted text (8 lines)
> I think I found the perfect solution, just leave the turtlebeach installed > for the gameport, but enable the nf7-s nforce2 sound device also, and use > the nforce2 for sound output. > > All that's needed is to choose the nforce2 as the output device in control > panel. > > Doing this gave a *dramatic* speedup in GPL! I went from 30fps at theFirst of all the Radio Shack unit is junk...second you need pots that
are at least 200-250K...third look at the Rockfire USB gameport. The
website for the rockfire is www.rockfire.com.tw. I bought one
somewhere online,sorry don't remember where I got it but was rock
solid. Steve P
Tim Wortman <[email hidden]> wrote in message news:<[email hidden]>...


































