Downloading my copy as I type this:
http://www.wingmanteam.com/3_60_release/beta/beta.htm
Keith.
Downloading my copy as I type this:
http://www.wingmanteam.com/3_60_release/beta/beta.htm
Keith.
Thanks for the info Keith
Downloading now :-)
Regards
"keith" <[email hidden]> wrote in message
news:[email hidden]...
> Downloading my copy as I type this:
>
> http://www.wingmanteam.com/3_60_release/beta/beta.htm
>
> Keith.
In article <D8SR4.14073$[email hidden]>,
"Vintook" <[email hidden]> wrote:
> After initial install of the drivers and following the installroutine word
> for word (with regards to when to plug in the wheel) I have noproblems,
Oops. Guess I didn't read the install instructions closely enough. You
mean you should plug it in at a certain time?
No problems with spikes in the forces?
Both I and a friend have these problems.
/Martin
Sent via Deja.com http://www.deja.com/
Before you buy.
hmmm.... the installer just crashes on me and i haven't gotten to try it. :(
"SaddleTramp" <[email hidden]> wrote in message
news:oVGR4.14494$[email hidden]...
Quoted text (17 lines)
> Thanks for the info Keith > Downloading now :-) > > Regards > > > "keith" <[email hidden]> wrote in message > news:[email hidden]... > > Downloading my copy as I type this: > > > > http://www.wingmanteam.com/3_60_release/beta/beta.htm > > > > Keith. > > > >In article <[email hidden]>,
keith <[email hidden]> wrote:
> Downloading my copy as I type this:
>
> http://www.wingmanteam.com/3_60_release/beta/beta.htm
I've been betatesting this for a couple of days. And I've found a
couple of problems.
1. Can't get it to run with split axis.
2. A major problem. The wheel turns very hard to the left when I turn
ever so slightly to the left. Making driving impossible. Try small
corrections on the Monza straight and you'll probably see what I mean.
The no.2 problem above really makes further testing impossible.
Everyone who downloads these drivers should try to help Logitech
getting these driver to work with GPL by reporting all problems to:
[email hidden]
Even if you encounter the same problems as I do please report them too
so that Logitech understands it is a common problem.
Cheers,
/Martin
Sent via Deja.com http://www.deja.com/
Before you buy.
After initial install of the drivers and following the install routine word
for word (with regards to when to plug in the wheel) I have no problems,
split axis or single axis works great. If I reboot though it puts it in
single axis and if I select split axis the pedals go dead and the only way
to get the wheel to work properly again is to uninstall and reinstall the
drivers. As long as I don't reboot after I install them everything works
great! Guess this puppy stays running till Logi sorts all this out! Heheh.
Vintook
"Martin Granberg" <[email hidden]> wrote in message
news:8f8d9r$9cc$[email hidden]...
Quoted text (32 lines)
> In article <[email hidden]>, > keith <[email hidden]> wrote: > > Downloading my copy as I type this: > > > > http://www.wingmanteam.com/3_60_release/beta/beta.htm > > I've been betatesting this for a couple of days. And I've found a > couple of problems. > > 1. Can't get it to run with split axis. > > 2. A major problem. The wheel turns very hard to the left when I turn > ever so slightly to the left. Making driving impossible. Try small > corrections on the Monza straight and you'll probably see what I mean. > > The no.2 problem above really makes further testing impossible. > > Everyone who downloads these drivers should try to help Logitech > getting these driver to work with GPL by reporting all problems to: > > [email hidden] > > Even if you encounter the same problems as I do please report them too > so that Logitech understands it is a common problem. > > Cheers, > > /Martin > > > Sent via Deja.com http://www.deja.com/ > Before you buy.Does this trick still work with the new drivers?
Borut
P.S. Just double-click the files, restart and try again!
Martin Granberg wrote in message <8f8d9r$9cc$[email hidden]>...
begin 666 CombinedPedals.reg
M__Y7`&D`;@!D`&\`=P!S`" `4@!E`&<`:0!S`'0`<@!Y`" `10!D`&D`= !O
M`'(`( !6`&4`<@!S`&D`;P!N`" `-0`N`# `, `-``H`#0`*`%L`2 !+`$4`
M60!?`$P`3P!#`$$`3 !?`$T`00!#`$@`20!.`$4`7 !3`%D`4P!4`$4`30!<
M`$,`=0!R`'(`90!N`'0`0P!O`&X`= !R`&\`; !3`&4`= !<`%,`90!R`'8`
M:0!C`&4`<P!<`$P`=P!5`',`8@!(`&D`9 !<`% `80!R`&$`;0!E`'0`90!R
M`',`70`-``H`(@!4`&@`<@!E`&4`00!X`&4`<P!7`&@`90!E`&P`(@`]`&0`
B=P!O`'(`9 `Z`# `, `P`# `, `P`# `, `-``H`#0`*````
`
end
begin 666 SeparatePedals.reg
M__Y7`&D`;@!D`&\`=P!S`" `4@!E`&<`:0!S`'0`<@!Y`" `10!D`&D`= !O
M`'(`( !6`&4`<@!S`&D`;P!N`" `-0`N`# `, `-``H`#0`*`%L`2 !+`$4`
M60!?`$P`3P!#`$$`3 !?`$T`00!#`$@`20!.`$4`7 !3`%D`4P!4`$4`30!<
M`$,`=0!R`'(`90!N`'0`0P!O`&X`= !R`&\`; !3`&4`= !<`%,`90!R`'8`
M:0!C`&4`<P!<`$P`=P!5`',`8@!(`&D`9 !<`% `80!R`&$`;0!E`'0`90!R
M`',`70`-``H`(@!4`&@`<@!E`&4`00!X`&4`<P!7`&@`90!E`&P`(@`]`&0`
B=P!O`'(`9 `Z`# `, `P`# `, `P`# `,0`-``H`#0`*````
`
end
Quoted text (32 lines)
>In article <[email hidden]>, > keith <[email hidden]> wrote: >> Downloading my copy as I type this: >> >> http://www.wingmanteam.com/3_60_release/beta/beta.htm > >I've been betatesting this for a couple of days. And I've found a >couple of problems. > >1. Can't get it to run with split axis. > >2. A major problem. The wheel turns very hard to the left when I turn >ever so slightly to the left. Making driving impossible. Try small >corrections on the Monza straight and you'll probably see what I mean. > >The no.2 problem above really makes further testing impossible. > >Everyone who downloads these drivers should try to help Logitech >getting these driver to work with GPL by reporting all problems to: > >[email hidden] > >Even if you encounter the same problems as I do please report them too >so that Logitech understands it is a common problem. > >Cheers, > >/Martin > > >Sent via Deja.com http://www.deja.com/ >Before you buy.On Tue, 09 May 2000 07:04:32 GMT, Martin Granberg <[email hidden]> wrote:
So far, no problems for me. I am running split axis with GPL, which is the only
game I use. The force feedback was initially far too strong, so I went into
core.ini and changed the force setting. It is now:
max_steering_torque = 500.000000
Overall, the LWFF feels a lot like it did with force enabled in Windows 98. I
haven't rebooted the PC yet, so I don't know if the settings will mess up like
someone else reported. With Windows 2000, I don't expect to be rebooting any
time soon. My up time is a couple of months already. Had a power cut yesterday,
and the Hibernate function worked perfectly.
Keith.
Asus P3V4X
P-III 600
256M SDRAM
SB Live Value
LWFF
voodoo3 3000 AGP


































