Race Sim Central
Rec.Autos.Simulators Archive

Anyone using CTFJ3 controller utility? If so, please help

4 posts by 2 people · 17 Mar 2000 - 18 Mar 2000 15:39 UTC

Hi. For the past year or so I've been using the CTFJ3 controller centering utility, available from "The Stickworks" http://www.stickworks.com primarily for my joystick setup for flight sims, and decided to try it this week with racing sims. Specifically, I'm trying to use it to decrease brake lockup in GPL, without resorting to the "squashball under the brake pedal" solution that some people use. I have a TSW with the rollers on the pedal base, and there's really no easy way I can see to put something like a squashball under the brake pedal to help decrease braking lockup. So, I've been experimenting with the CTFJ3 utility because you can use it to decrease the range of a joystick's axis. In this case, with the split axis for brake and throttle on the TSW, I've been trying to decrease the axis range on the brake (the Y axis) to about 75 - 80% of its maximum range. The problem is that this works sometimes with GPL and not others, even with the same car and setup used on the same track. When I can get this to work, the brakes get almost to lockup when the pedal's fully depressed which is just what I want. But other times, the utility seems to have no effect. So, is anyone else using this (otherwise great) utility with racing sims, especially GPL? Also, if so, should you calibrate your wheel and pedals in the GPL "Options" screen on top of doing so from within CTFJ3? TIA for any help, and for putting up with my typical verbose posting style. :) Cheers, ============================ Dave Mack (remove "nospamfor_" for correspondence)
The only problem or confusion that sometimes happens is if you recalibrate inside GPL (or another title) with CTFJ running. You have to turn it off, calibrate "normally", then turn it on and go back into the game. If you calibrate with CTFJ already on (slicing off the depressed end of your pedal travel), it may seem like there is no difference from normal, because full depression of the pedal will still be full braking (albeit a bit lower resolution). I couldn't drive in GPL with my Saitek R4 FFB unless I used CTFJ--the Saitek's pedal travel and resolution on the brake pedal are so little/low that it is unsuitable for GPL. CTFJ made it tolerable. The king of brake pedals has to be my current Ferrari wheel--the resolution on the brake pedal is the same as the steering wheel!! My lap times have decreased in GPL for no other reason than I can actually brake accurately for the first time!! It makes a huge difference. Marc.
Quoted text (40 lines)> Hi. For the past year or so I've been using the CTFJ3 controller > centering utility, available from "The Stickworks" > http://www.stickworks.com > primarily for my joystick setup for flight sims, and decided to try it > this week with racing sims. > Specifically, I'm trying to use it to decrease brake lockup in GPL, > without resorting to the "squashball under the brake pedal" solution > that some people use. I have a TSW with the rollers on the pedal > base, and there's really no easy way I can see to put something like a > squashball under the brake pedal to help decrease braking lockup. > So, I've been experimenting with the CTFJ3 utility because you can use > it to decrease the range of a joystick's axis. In this case, with the > split axis for brake and throttle on the TSW, I've been trying to > decrease the axis range on the brake (the Y axis) to about 75 - 80% of > its maximum range. > The problem is that this works sometimes with GPL and not others, even > with the same car and setup used on the same track. When I can get > this to work, the brakes get almost to lockup when the pedal's fully > depressed which is just what I want. But other times, the utility > seems to have no effect. > So, is anyone else using this (otherwise great) utility with racing > sims, especially GPL? > Also, if so, should you calibrate your wheel and pedals in the GPL > "Options" screen on top of doing so from within CTFJ3? > TIA for any help, and for putting up with my typical verbose posting > style. :) > Cheers, > ============================ > Dave Mack > (remove "nospamfor_" for correspondence)
On Fri, 17 Mar 2000 21:59:54 GMT, "Marc Collins"
Quoted text (7 lines)>The only problem or confusion that sometimes happens is if you recalibrate >inside GPL (or another title) with CTFJ running. You have to turn it off, >calibrate "normally", then turn it on and go back into the game. If you >calibrate with CTFJ already on (slicing off the depressed end of your pedal >travel), it may seem like there is no difference from normal, because full >depression of the pedal will still be full braking (albeit a bit lower >resolution).
OK, thanks, that makes sense. But, I'm still a bit confused about using CTFJ and calibrating *outside* of GPL. More specifically, I'm unsure about the sequence of calibrating, changing range values, and "centering axes". Let's say you're experimenting with different range limits on the brake axis, so you've set the Y-axis range to something like 80. Here's the sequence I've been using, which I'm not sure is correct: 1) Launch CTFJ 2) Click the CTFJ "calibrate" button which launches the Control Panel calibration utility. 3) Calibrate the wheel & pedals 4) Click "OK", leave the calibration utility and go back into CTFJ. 5) Change the Y-axis (brake axis) range to 80. 6) Click the "calibrate" button again which launches the Control Panel calibration utility. 7) Calibrate the wheel & pedals again 8) Click "OK", leave the calibration utility and go back into CTFJ. 9) Click the CTFJ "center axes" button to center the X-axis (steering axis) 10) Click the CTFJ "Done" button 11) Launch GPL, and don't calibrate in the GPL "Options" screen...just go right to training or racing. This would be easier for me if the .doc file supplied with CTFJ dealt more with the sequence of using the features, instead of just what the features are for. But, it's a free utility and a good one too (has saved my sanity in flight sims, that's for sure), so I guess great documentation is asking for the moon. :) Anyway, if you can straighten me out with this, I'll be in your debt for sure. And if there are others who have plowed through this thread this far, give this utility a try. It doesn't seem to take up any noticeable processor bandwidth, and is really, really cool. TIA again, ============================ Dave Mack (remove "nospamfor_" for correspondence)
Marc Collins 18 Mar 2000 15:39 UTC#286870
I don't know what else I can say...my wheels haven't needed calibrating in Windows, because they were USB or partially digital. If you calibrate in GPL (or any title) with CTFJ already running and configured to do something, you are making a fundamental error in the use of the utility. You have to calibrate with your "normal" no-CTFJ settings and then play with CTFJ to trim or tweak whatever it is you are not happy with. Lopping off the last 10% of the brake axis worked wonders for me in GPL. Marc. "nospamfor_dmack" <[email hidden]> wrote in message news:[email hidden]... > On Fri, 17 Mar 2000 21:59:54 GMT, "Marc Collins" > <[email hidden]> wrote: > > >The only problem or confusion that sometimes happens is if yourecalibrate > >inside GPL (or another title) with CTFJ running. You have to turn itoff, > >calibrate "normally", then turn it on and go back into the game. If you > >calibrate with CTFJ already on (slicing off the depressed end of yourpedal > >travel), it may seem like there is no difference from normal, becausefull
Quoted text (47 lines)> >depression of the pedal will still be full braking (albeit a bit lower > >resolution). > > OK, thanks, that makes sense. But, I'm still a bit confused about > using CTFJ and calibrating *outside* of GPL. More specifically, I'm > unsure about the sequence of calibrating, changing range values, and > "centering axes". > > Let's say you're experimenting with different range limits on the > brake axis, so you've set the Y-axis range to something like 80. > > Here's the sequence I've been using, which I'm not sure is correct: > > 1) Launch CTFJ > 2) Click the CTFJ "calibrate" button which launches the Control Panel > calibration utility. > 3) Calibrate the wheel & pedals > 4) Click "OK", leave the calibration utility and go back into CTFJ. > 5) Change the Y-axis (brake axis) range to 80. > 6) Click the "calibrate" button again which launches the Control Panel > calibration utility. > 7) Calibrate the wheel & pedals again > 8) Click "OK", leave the calibration utility and go back into CTFJ. > 9) Click the CTFJ "center axes" button to center the X-axis (steering > axis) > 10) Click the CTFJ "Done" button > 11) Launch GPL, and don't calibrate in the GPL "Options" screen...just > go right to training or racing. > > > This would be easier for me if the .doc file supplied with CTFJ dealt > more with the sequence of using the features, instead of just what the > features are for. But, it's a free utility and a good one too (has > saved my sanity in flight sims, that's for sure), so I guess great > documentation is asking for the moon. :) > > Anyway, if you can straighten me out with this, I'll be in your debt > for sure. And if there are others who have plowed through this thread > this far, give this utility a try. It doesn't seem to take up any > noticeable processor bandwidth, and is really, really cool. > > TIA again, > ============================ > Dave Mack > [email hidden] > > (remove "nospamfor_" for correspondence)

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy