Just in case I may want to try this. I have an old pair of CH Pro pedals.
Can I just plug them into my gameport with the wheel in the USB port? Should
the pedal switch be on rudder or pedals?
Slot
I use my standard CH Pedals and an LWFF together with the CH Pedals in my
gameport and the LWFF in a USB slot. The Force RS should work the same.
I set the pedals as controller 1 using the CH Flightsick Pro driver with
rudder pedals enabled. I have to plug a joystick into the pedals to get
them to work. With the pedlas set to Car mode, I get split axis controls
for the pedals. I set the LWFF as controller 2. Works like a dream in GPL
and RC2000.
The only way I could get the pedals to work without a joystick plugged into
them was to using a suggestion from this group to define a custom 2 axis no
button controller which I called CH Pedals. You then add two of these
controllers, one as controller 1 and the other as controller 2. The first
controller is not detected but the second one is. Weird! You then add the
LWFF as controller 3 and away you go.
Hope this helps with the Force RS.
Cheers
Phil
--
http://www.youpies.co.uk
Indeed that works fine Phil, but strangely enough I have more FF when
I put my LWFF on controller 1. I allways had my CH pedals on 1 and the
LWFF on 2. When I changed this, I even had to lower the damping in the
Core.ini file to make the wheel less forcefull!
Some people also noticed this, some didn't, so give it a try, you
never know.
Andre
On Tue, 8 Feb 2000 21:24:19 -0000, "Phil Lee" <[email hidden]>
wrote:
