Race Sim Central
Rec.Autos.Simulators Archive

Rally Championship - New patch prevents engine failure?

4 posts by 3 people · 10 Jan 2000 - 11 Jan 2000

rrevved 10 Jan 2000#513472
>When >it first gear, it moves, shifts into second, back to one, back to two, back >to one, back to two, and continues this for AGES before proceeding into >third and so on. Anybody else experiencing this? Try using manual shift instead of automatic shift. -- * rrev at mindspring dot com * [link lost in import] * [link lost in import]
The Phoeni 11 Jan 2000#513678
x:no archive: yes In one of my first races (I don't remember if it was in Time Trial or Single Race) in Rally Championship, I had a great time totally wrecking my car, to the point that I had even damaged the cooling system, engine and just a few feet from the end of the course the engine blew. Of course, I don't usually drive like this. :-) I patched the product and have been doing my very best to reproduce the same major damage effects, again and again, on even the hottest of the courses, but with no luck. I'm able to crack, smash and break every item of the outer body work, from the windows, to the bonnet and bumpers, but the engine hasn't been touched. I've race some of the longest tracks backwards and forwards trying to crash as much as possible yet STILL nothing! Even keeping the engine in first gear at the highest rev for 6 minutes did nothing! Am I missing something here? Is there something else I need to be doing to increase the damage to the car? My current ral.cfg looks as follows: patchstickygrass=50 patchgravity=100 patchdamages=1000 patchbrakegrip=50 patchaccelgrip=100 patchslidegrip=100 patchgriptarmac=100 patchgripgravel=100 patchgripmud=100 patchgripsnow=100 patchgripgrass=100 patchmaxdrawdistance=4 framecounter=1 fizpatch=1 Also, when racing in Arcade mode, the cars seem to have a problem accelerating. Not sure if this is to do with the patch or not though. When it first gear, it moves, shifts into second, back to one, back to two, back to one, back to two, and continues this for AGES before proceeding into third and so on. Anybody else experiencing this? I've tweaked the 'patchaccelgrip' to see if that would make any different. It didn't. Also, don't you find it annoying that when the car hits something like a tree, hay barrel or small rock it suddenly STOPS! It doesn't spin, or crash. It just stops dead. There was something else I wanted to mention, but can't remember right now. I'll post back later if I remember. Best regards, The Phoenix
The Phoeni 11 Jan 2000#513679
x:no archive: yes I shouldn't have to. Automatic shifting should work just as well as manual shifting. It doesn't. But when I do use manual shifting it works fine. I'd still like to sort out the problems with the automatic transmission. Best regards, The Phoenix
(unknown) 11 Jan 2000#513680
Quoted text (48 lines)> x:no archive: yes > In one of my first races (I don't remember if it was in Time Trial or > Single > Race) in Rally Championship, I had a great time totally wrecking my > car, to > the point that I had even damaged the cooling system, engine and just > a few > feet from the end of the course the engine blew. Of course, I don't > usually > drive like this. :-) > I patched the product and have been doing my very best to reproduce > the same > major damage effects, again and again, on even the hottest of the > courses, > but with no luck. > I'm able to crack, smash and break every item of the outer body work, > from > the windows, to the bonnet and bumpers, but the engine hasn't been > touched. > I've race some of the longest tracks backwards and forwards trying to > crash > as much as possible yet STILL nothing! Even keeping the engine in > first gear > at the highest rev for 6 minutes did nothing! > Am I missing something here? Is there something else I need to be > doing to > increase the damage to the car? > My current ral.cfg looks as follows: > patchstickygrass=50 > patchgravity=100 > patchdamages=1000 > patchbrakegrip=50 > patchaccelgrip=100 > patchslidegrip=100 > patchgriptarmac=100 > patchgripgravel=100 > patchgripmud=100 > patchgripsnow=100 > patchgripgrass=100 > patchmaxdrawdistance=4 > framecounter=1 > fizpatch=1
ISTR in the readme file with the patch, it saying something about the parameters for the ral.cfg file are between 0 and 200? I see you have damages set to 1000, maybe it should be in the 0 to 200 range? Try reading the readme/help file for more info on this.... 8-) *Peter* - http://www.cix.co.uk/~peterpc/home.html

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy