Okay, I just got GPL going with the patch. I'm averaging 36 fps at 1280 x
1024. The graphics actually look quite good at this resolution. I especially
like the French track (Rouen ?), but I haven't tried them all. I couldn't
get either trainer car to stay on the track, but the default GP car was
okay. Well, except that they handle nothing like the real cars, which were
actually quite nimble and had decent traction. I probably shouldn't have
said that on this ng, but at 30 mph GPL cars slide like they're on ice and
take 100 feet to stop. I had the opportunity to drive a Lotus in 1977 (?) at
Louden NH when I was racing enduro karts. It was only a couple laps (no,
they weren't racing them, someone just brought it there) and I wasn't taking
any chances, but the car was quite sure footed. The game replicates the
initial take off and high speed shallow curves well, but the rest is off
quite a bit. That being said, I loved the game anyway and plan to race it
quite a bit. From my experience, SCGT has the most realistic handling, but
probably one of the easiest to replicate because of the type of car.
Anyway, my original point was going to be about the Ferrari wheel and GPL.
The wheel is great with the game! It takes some playing with the force
settings if you want to make it feel authentic, but the results are worth
it. Adjusting the FF latency in the game takes a little while because its
trail and error (each wheel will be different), but the default values in
core.ini do work okay too. For those with the Ferrari wheel, my control
panel Gain Settings setup is (and it could change):
Overall device gain 100
Spring gain 100
Damper gain 0 to 5
Default spring Off
If you've got a setup that you think really rocks, let me know. I'd like to
try it.
Slot
I use the same settings that you do for the control panel--100/100/0/off.
The GPL settings I have settled on (at least for now) are damping 0, latency
0, torque 255.
At least GPL allows for direct control of the FFB levels...and you can get
some decent feedback with this wheel. The basic drivers for the Ferrari
wheel are pathetically weak and games like N3 and NL, which worked very well
on my Saitek R4 FFB, are close to dead with the Ferrari. Any idea if/when
Guillemot will fix this (hopefully like Logitech did with their wheel which
suffered exactly the same problem and was cured by new drivers)??
Marc.
Have you set the FORCE SCALE and FORCE DAMPING in the N3.ini and the NL.ini
files when using FF in N3 and NL? It made quite a difference.
James Larson
Omaha, Nebraska, USA
Yes I had them set with my prior wheel and have played around with them with
the Ferrari wheel--and maxing out the forces and regardless of where the
damping is set results in pathetically weak feedback. Do you have the
Ferrari wheel or are you just making a general comment?
Marc.
Marc, I have the Ferrari wheel and the Logitech Wingman Formula Force wheel
(and the Act Labs force feedback wheel with the shifter is back ordered and
will arrive in a few weeks--I guess I'm sort of obsessive about wheels!)
I felt the Ferrari wheel and Logitech wheel were different when it came to N3
and NL, but not that the Logitech was stronger and the Ferrari weaker. I can't
say I prefer one to the other when it comes to N3 or NL.
I think the Ferrari has greater subtlety on RC2000, by far.
I have the Ferrari wheel with one clamp and the round knob.
James Larson
Omaha, Nebraska, USA
Thanks for the great info. Here are two simple tests to do in N3 or NL:
1) Drive from the apron on to the banking at a track with fairly high
banking....what do you feel through the wheel?
2) Drive on flat track (perhaps around an apron) and purposely make the back
end of the car step out...what do you feel?
With my R4 FFB, I felt what seemed to be fairly appropriate forces through
the wheel signifying both of these events. With the Ferrari....virtually
nothing.
I didn't have the R4 on long enough using RC2000, but I believe a similar
phenomenon is happening there...hit a wall or fly over a jump and you feel
great forces with the Ferrari. But I can't seem to feel any torque steer
with the wheels slipping and biting for traction on gravel that I am sure
was there with the R4.
Any comments on particular forces or feedback done well with any of your
wheels?? You should be a mine of information for all of us less obsessive
wheel users :)
Thanks,
Marc.
Could you comment on the positioning resolution on both these wheels?
I'm in the market for a FF wheel, but would hate to end up with
imprecise steering. I've read good things about both wheels, and the
Ferrari looks like the best deal, especially if they get the drivers
sorted. Have you looked at both wheels with DXTweak?
Any other differences, like frame-rate impact? How about the pedals on
the Ferrari (I've read plenty on the Logitech pedals ;)!).
The Act Labs sounds like it's not what I want, with what I've heard
about notchiness in the wheel.
FWIW, this would be an upgrade from a TM Nascar Pro.
Thanks for any info!
Kendt
Sent via Deja.com http://www.deja.com/
Before you buy.
The Ferrari wheel has 1024 "notches" in the steering...the same as the
Saitek. It's pedals are much higher resolution than the Saitek. There is a
huge difference in pedal controllability in a title like GPL. What's
interesting is that even though the steering should be the same, and all
other settings I am using are the same, the Ferrari is not as smooth,
especially at centre. The optical system in the Saitek seems to be able to
permit one notch at a time turning (try the GPL calibration screen) while
the Ferrari cannot come close. It may be that the belts still need to be
broken in more--at this point I don't know, but there are enough scary
things about the Ferrari that I would not buy one until I had some answers.
Mine will be returned unless Guillemot can guarantee me these issues will be
addressed a.s.a.p.
Hopefully James can tell us about the Logitech.
Marc.
Quoted text (42 lines)
> Could you comment on the positioning resolution on both these wheels? > I'm in the market for a FF wheel, but would hate to end up with > imprecise steering. I've read good things about both wheels, and the > Ferrari looks like the best deal, especially if they get the drivers > sorted. Have you looked at both wheels with DXTweak? > Any other differences, like frame-rate impact? How about the pedals on > the Ferrari (I've read plenty on the Logitech pedals ;)!). > The Act Labs sounds like it's not what I want, with what I've heard > about notchiness in the wheel. > FWIW, this would be an upgrade from a TM Nascar Pro. > Thanks for any info! > Kendt > > Marc, I have the Ferrari wheel and the Logitech Wingman Formula > Force wheel > > (and the Act Labs force feedback wheel with the shifter is back > ordered and > > will arrive in a few weeks--I guess I'm sort of obsessive about > wheels!) > > I felt the Ferrari wheel and Logitech wheel were different when it > came to N3 > > and NL, but not that the Logitech was stronger and the Ferrari > weaker. I can't > > say I prefer one to the other when it comes to N3 or NL. > > I think the Ferrari has greater subtlety on RC2000, by far. > > I have the Ferrari wheel with one clamp and the round knob. > > >Do you have the > > >Ferrari wheel or are you just making a general comment? > > James Larson > > Omaha, Nebraska, USA > Sent via Deja.com http://www.deja.com/ > Before you buy.I also have the Ferrari wheel and the FF effects in RC2000 are very strong..
not only when hitting a wall or anything but when I go into a left/right one
type corner full speed I can feel the front wheels starting to loose their
grip and the wheel turn light...
I think your Ferrari wheel had something wrong inside. Mine works great and
has some strong and very smooth FF effects, not only in RC2000 but also in
GPL, RS2, N3 and other games. Overall I am very happy with the wheel, only
the brake pedal feels a bit sensitive to me but I think that's just
something I have to get used to...
--
Regards,
_________________________________________
Sjon Stigter
_________________________________________
I'm your dream, make you real
I'm your eyes when you must steal
I'm your pain when you can't feel
Sad but true
_________________________________________
As I said, it's not the amount of force for some titles like RC2000--it's
the specific nature of the forces or lack thereof. Do you find the forces
in N3 as strong as in RC2000? They are vastly different on my system. Does
your Ferrari wheel have one***clamp or two on the bottom?
Thanks,
Marc.
> > I didn't have the R4 on long enough using RC2000, but I believe a similar
> > phenomenon is happening there...hit a wall or fly over a jump and you feel
> > great forces with the Ferrari. But I can't seem to feel any torque steer
> > with the wheels slipping and biting for traction on gravel that I am sure
> > was there with the R4.
> I also have the Ferrari wheel and the FF effects in RC2000 are very strong..
> not only when hitting a wall or anything but when I go into a left/right one
> type corner full speed I can feel the front wheels starting to loose their
> grip and the wheel turn light...
> I think your Ferrari wheel had something wrong inside. Mine works great and
Quoted text (19 lines)
> has some strong and very smooth FF effects, not only in RC2000 but also in > GPL, RS2, N3 and other games. Overall I am very happy with the wheel, only > the brake pedal feels a bit sensitive to me but I think that's just > something I have to get used to... > -- > Regards, > _________________________________________ > Sjon Stigter > _________________________________________ > I'm your dream, make you real > I'm your eyes when you must steal > I'm your pain when you can't feel > Sad but true > _________________________________________My Ferrari wheel has about 420 notches, lock to lock. Nowhere close to 1024.
You're implying that the Saitek has a resolution of 1024, but no optical
system has an effective resolution of much over 96, which is less than the
128 or so of wheels with pots. The absolute best resolution possible in a
wheel is 256, but you'll never see much more that 128 on any wheel. This
isn't something that you can fix with software, although good drivers can
make a wheel "feel" more precise than the numbers indicate. Games like GPL
and N3 do a good job extrapolating the resolution, but they can't make a bad
wheel better than a good one. Nevertheless, all the specs in the world
won't tell you as much as actually driving with the wheel.
Slot
Marc, there is always going to be some latency. Why would you set it at 0 ??
As far as "fixing" the amount of FF, I don't know. I'm not aware that
anything needs fixing. I have plenty of FF power. And yes, I feel all the
small stuff as well. If you threw a pea on the track and I ran over it, I'd
feel it. If you spat on the track and my tire hit it, I'd feel the loss of
traction. Subtle enough? I'm not into arcade type realism. These cars had
suspensions. If I run over a curb in SCGT, I don't want it to pull me
uncontrollably off the track. I want to feel the wheels losing grip a little
after it happens, like in a real car, not before it happens. If I'm not
mistaken, these cars could pull about 1G on a test pad. When they let go,
you had to really be quick to save it. In GPL, I also like setting up the
paddle brake as the clutch. In N3 all the right forces are there. It feels
right and predictable. Running over a pea should not feel like running over
a bolder.
Slot
> I use the same settings that you do for the control panel--100/100/0/off.
> The GPL settings I have settled on (at least for now) are damping 0, latency
> 0, torque 255.
> At least GPL allows for direct control of the FFB levels...and you can get
> some decent feedback with this wheel. The basic drivers for the Ferrari
> wheel are pathetically weak and games like N3 and NL, which worked very well
> on my Saitek R4 FFB, are close to dead with the Ferrari. Any idea if/when
> Guillemot will fix this (hopefully like Logitech did with their wheel which
x
> > 1024. The graphics actually look quite good at this resolution. I
> especially
> > like the French track (Rouen ?), but I haven't tried them all. I couldn't
> > get either trainer car to stay on the track, but the default GP car was
> > okay. Well, except that they handle nothing like the real cars, which were
> > actually quite nimble and had decent traction. I probably shouldn't have
> > said that on this ng, but at 30 mph GPL cars slide like they're on ice and
> > take 100 feet to stop. I had the opportunity to drive a Lotus in 1977 (?)
it
> > quite a bit. From my experience, SCGT has the most realistic handling, but
> > probably one of the easiest to replicate because of the type of car.
> > Anyway, my original point was going to be about the Ferrari wheel and GPL.
> > The wheel is great with the game! It takes some playing with the force
> > settings if you want to make it feel authentic, but the results are worth
> > it. Adjusting the FF latency in the game takes a little while because its
> > trail and error (each wheel will be different), but the default values in
Quoted text (8 lines)
> suffered exactly the same problem and was cured by new drivers)?? > Marc. > > Okay, I just got GPL going with the patch. I'm averaging 36 fps at 1280Quoted text (7 lines)
> at > > Louden NH when I was racing enduro karts. It was only a couple laps (no, > > they weren't racing them, someone just brought it there) and I wasn't > taking > > any chances, but the car was quite sure footed. The game replicates the > > initial take off and high speed shallow curves well, but the rest is off > > quite a bit. That being said, I loved the game anyway and plan to raceQuoted text (12 lines)
> > core.ini do work okay too. For those with the Ferrari wheel, my control > > panel Gain Settings setup is (and it could change): > > Overall device gain 100 > > Spring gain 100 > > Damper gain 0 to 5 > > Default spring Off > > If you've got a setup that you think really rocks, let me know. I'd like > to > > try it. > > SlotExactly!!! Except that in N3 with my wheel, I can feel almost nothing short
of slamming into a wall. Yet GPL works reasonably well. I guess either you
are nuts or my wheel is defective. I am calling Guillemot right now....
Thanks for the helpful feedback,
Marc.
> In N3 all the right forces are there. It feels
> right and predictable. Running over a pea should not feel like running over
panel--100/100/0/off.
> > The GPL settings I have settled on (at least for now) are damping 0,
> latency
> > 0, torque 255.
> > At least GPL allows for direct control of the FFB levels...and you can get
> > some decent feedback with this wheel. The basic drivers for the Ferrari
> > wheel are pathetically weak and games like N3 and NL, which worked very
> well
> > on my Saitek R4 FFB, are close to dead with the Ferrari. Any idea if/when
1280
> x
> > > 1024. The graphics actually look quite good at this resolution. I
> > especially
> > > like the French track (Rouen ?), but I haven't tried them all. I
> couldn't
> > > get either trainer car to stay on the track, but the default GP car was
> > > okay. Well, except that they handle nothing like the real cars, which
> were
> > > actually quite nimble and had decent traction. I probably shouldn't have
> > > said that on this ng, but at 30 mph GPL cars slide like they're on ice
> and
> > > take 100 feet to stop. I had the opportunity to drive a Lotus in 1977
> (?)
> > at
> > > Louden NH when I was racing enduro karts. It was only a couple laps (no,
> > > they weren't racing them, someone just brought it there) and I wasn't
> > taking
> > > any chances, but the car was quite sure footed. The game replicates the
> > > initial take off and high speed shallow curves well, but the rest is off
control
like
> > to
> > > try it.
> > > Slot
Quoted text (8 lines)
> a bolder. > Slot > > I use the same settings that you do for the controlQuoted text (10 lines)
> > Guillemot will fix this (hopefully like Logitech did with their wheel > which > > suffered exactly the same problem and was cured by new drivers)?? > > Marc. > > > Okay, I just got GPL going with the patch. I'm averaging 36 fps atQuoted text (15 lines)
> > > quite a bit. That being said, I loved the game anyway and plan to race > it > > > quite a bit. From my experience, SCGT has the most realistic handling, > but > > > probably one of the easiest to replicate because of the type of car. > > > Anyway, my original point was going to be about the Ferrari wheel and > GPL. > > > The wheel is great with the game! It takes some playing with the force > > > settings if you want to make it feel authentic, but the results are > worth > > > it. Adjusting the FF latency in the game takes a little while because > its > > > trail and error (each wheel will be different), but the default values > in > > > core.ini do work okay too. For those with the Ferrari wheel, myQuoted text (7 lines)
> > > panel Gain Settings setup is (and it could change): > > > Overall device gain 100 > > > Spring gain 100 > > > Damper gain 0 to 5 > > > Default spring Off > > > If you've got a setup that you think really rocks, let me know. I'dWell, 1024 notches show up in the GPL calibration screen, as they did with
the Saitek. The pedal resolution is much higher with the Ferrari, though,
so I perhaps I am wrongly assuming that the GPL calibration screen actually
works properly.
What I can tell you for sure is that the Ferrari wheel is much more "notchy"
in the way it reacts in-game (regardless of title). In other words, it acts
like it has only about 420 notches compared to triple that with the other
wheel. It's like it is impossible to make very small steering corrections.
My DX deadzone settings (all 0) remain the same.
Marc.
> My Ferrari wheel has about 420 notches, lock to lock. Nowhere close to 1024.
bad
is
> a
> >huge difference in pedal controllability in a title like GPL. What's
> >interesting is that even though the steering should be the same, and all
> >other settings I am using are the same, the Ferrari is not as smooth,
> >especially at centre. The optical system in the Saitek seems to be able to
> >permit one notch at a time turning (try the GPL calibration screen) while
> >the Ferrari cannot come close. >
Quoted text (7 lines)
> You're implying that the Saitek has a resolution of 1024, but no optical > system has an effective resolution of much over 96, which is less than the > 128 or so of wheels with pots. The absolute best resolution possible in a > wheel is 256, but you'll never see much more that 128 on any wheel. This > isn't something that you can fix with software, although good drivers can > make a wheel "feel" more precise than the numbers indicate. Games like GPL > and N3 do a good job extrapolating the resolution, but they can't make aQuoted text (10 lines)
> wheel better than a good one. Nevertheless, all the specs in the world > won't tell you as much as actually driving with the wheel. > Slot > >The Ferrari wheel has 1024 "notches" in the steering...the same as the > >Saitek. It's pedals are much higher resolution than the Saitek. ThereI see, Marc. You're counting the points of resolution as 'notches'. I think
everyone else is counting the 'notches' you feel when you actually turn the
wheel. I've hooked up 3 of my current wheels to N3 and they all show 1024
points of resolution (which I think N3 extrapolates from the original 256
points available and multiplies by 4). The wheels I used are the Ferrari
wheel, the Andretti wheel and the CH EXL500. If you notice, the Ferrari
wheel has about 220 degrees, lock to lock. But notice that only 180 degrees
are usable. In other words, the last 20 degrees in each direction are dead
space and don't show up as wheel movement. Other wheels, like the Andretti
and possibly you Saitek, have 270 degrees, lock to lock. So one wheel will
be more sensitive than the other, and which you like best is a personal
preference.
Next, check out your Ferrari wheel and see if it centers properly. If you
lock it to the right and let it go, does it spring back to center? What
about locking it to the left? Mine pulled heavily to the right before I
adjusted the trimmer inside, and the forces were all screwed up (obvioulsy).
I suspect one of two problems with your setup. Either the wheel isn't
calibrated correctly from the factory, or you're spoiled by unrealistic
forces from your Saitek, meaning that you expect a pebble to feel like a
rock and your Saitek delivers.
Slot
"You know, a nickel ain't worth a dime anymore".
>Well, 1024 notches show up in the GPL calibration screen, as they did with
>the Saitek. The pedal resolution is much higher with the Ferrari, though,
>so I perhaps I am wrongly assuming that the GPL calibration screen actually
>works properly.
>What I can tell you for sure is that the Ferrari wheel is much more "notchy"
>in the way it reacts in-game (regardless of title). In other words, it acts
the
>> 128 or so of wheels with pots. The absolute best resolution possible in a
>> wheel is 256, but you'll never see much more that 128 on any wheel. This
>> isn't something that you can fix with software, although good drivers can
>> make a wheel "feel" more precise than the numbers indicate. Games like GPL
while
>> >the Ferrari cannot come close. >
Quoted text (13 lines)
>like it has only about 420 notches compared to triple that with the other >wheel. It's like it is impossible to make very small steering corrections. >My DX deadzone settings (all 0) remain the same. >Marc. >> My Ferrari wheel has about 420 notches, lock to lock. Nowhere close to >1024. >> You're implying that the Saitek has a resolution of 1024, but no optical >> system has an effective resolution of much over 96, which is less thanQuoted text (20 lines)
>> and N3 do a good job extrapolating the resolution, but they can't make a >bad >> wheel better than a good one. Nevertheless, all the specs in the world >> won't tell you as much as actually driving with the wheel. >> Slot >> >The Ferrari wheel has 1024 "notches" in the steering...the same as the >> >Saitek. It's pedals are much higher resolution than the Saitek. There >is >> a >> >huge difference in pedal controllability in a title like GPL. What's >> >interesting is that even though the steering should be the same, and all >> >other settings I am using are the same, the Ferrari is not as smooth, >> >especially at centre. The optical system in the Saitek seems to be able >to >> >permit one notch at a time turning (try the GPL calibration screen)Hehe, well I am a little nuts.
Slot
"You should always go to your friends funerals, otherwise they won't come to
yours".
You seem to be missing my point consistently: the Saitek feels normal, the
Ferrari feels dead in N3. I am not a moron who plays arcade games and
thinks it's "kewl" to have the wheel ripped out of my hand...I just want to
feel what Papy programmed into the game. I have stated over and over that I
am interested in the subtle and sophisticated feedback only--the big forces
already work OK.
Now you tell me your wheel is dead at both ends????? And you didn't think
that odd?? Perhaps you should re-adjust it again as you may have caused
that problem yourself--mine works, as it should, all the way to the ends.
Try the GPL calibration screen for your controllers...the N3 controller
calibration is primitive by comparison. You counted notches???? How the
hell did you do that? The resolution of each axis is available for all to
see in GPL.
And, the newer releases of the Ferrari wheel have two clamps, not one, so
sorry you are wrong on that one, too.
My wheel is to be exchanged for another since the Guillemot engineers (the
tech. support were completely clueless) assured me that it works well in N3
and that forces that I cannot feel are definitely there with other samples
of the Ferrari wheel--and there are a few other things wrong with mine that
suggest a defective product. Hopefully, the next one will work properly and
Guillemot will release newer (stronger) drivers (they did acknowledge that
the maximum forces of the wheel are less than its competitors) and a better
profiler program....then the Ferrari wheel will be hands-down the best
choice.
Marc.
> I see, Marc. You're counting the points of resolution as 'notches'. I think
> everyone else is counting the 'notches' you feel when you actually turn the
> wheel. I've hooked up 3 of my current wheels to N3 and they all show 1024
> points of resolution (which I think N3 extrapolates from the original 256
> points available and multiplies by 4). The wheels I used are the Ferrari
> wheel, the Andretti wheel and the CH EXL500. If you notice, the Ferrari
> wheel has about 220 degrees, lock to lock. But notice that only 180 degrees
(obvioulsy).
with
> >the Saitek. The pedal resolution is much higher with the Ferrari, though,
> >so I perhaps I am wrongly assuming that the GPL calibration screen actually
corrections.
optical
> >> system has an effective resolution of much over 96, which is less than
> the
> >> 128 or so of wheels with pots. The absolute best resolution possible in a
> >> wheel is 256, but you'll never see much more that 128 on any wheel. This
> >> isn't something that you can fix with software, although good drivers can
> >> make a wheel "feel" more precise than the numbers indicate. Games like
> GPL
> >> and N3 do a good job extrapolating the resolution, but they can't make a
There
> >is
> >> a
> >> >huge difference in pedal controllability in a title like GPL. What's
> >> >interesting is that even though the steering should be the same, and all
> >> >other settings I am using are the same, the Ferrari is not as smooth,
> >> >especially at centre. The optical system in the Saitek seems to be able
> >to
> >> >permit one notch at a time turning (try the GPL calibration screen)
> while
> >> >the Ferrari cannot come close. >
Quoted text (9 lines)
> are usable. In other words, the last 20 degrees in each direction are dead > space and don't show up as wheel movement. Other wheels, like the Andretti > and possibly you Saitek, have 270 degrees, lock to lock. So one wheel will > be more sensitive than the other, and which you like best is a personal > preference. > Next, check out your Ferrari wheel and see if it centers properly. If you > lock it to the right and let it go, does it spring back to center? What > about locking it to the left? Mine pulled heavily to the right before I > adjusted the trimmer inside, and the forces were all screwed upQuoted text (12 lines)
> I suspect one of two problems with your setup. Either the wheel isn't > calibrated correctly from the factory, or you're spoiled by unrealistic > forces from your Saitek, meaning that you expect a pebble to feel like a > rock and your Saitek delivers. > Slot > "You know, a nickel ain't worth a dime anymore". > >Well, 1024 notches show up in the GPL calibration screen, as they didQuoted text (8 lines)
> >works properly. > >What I can tell you for sure is that the Ferrari wheel is much more > "notchy" > >in the way it reacts in-game (regardless of title). In other words, it > acts > >like it has only about 420 notches compared to triple that with the other > >wheel. It's like it is impossible to make very small steeringQuoted text (10 lines)
> >My DX deadzone settings (all 0) remain the same. > >Marc. > >> My Ferrari wheel has about 420 notches, lock to lock. Nowhere close to > >1024. > >> You're implying that the Saitek has a resolution of 1024, but noQuoted text (11 lines)
> >bad > >> wheel better than a good one. Nevertheless, all the specs in the world > >> won't tell you as much as actually driving with the wheel. > >> Slot > >> >The Ferrari wheel has 1024 "notches" in the steering...the same as the > >> >Saitek. It's pedals are much higher resolution than the Saitek.30mph slide like they are on ice, takes 100 feet to stop. hmmm that sounds
like an Excursion or the Explodition


































