Race Sim Central
Rec.Autos.Simulators Archive

N3 - no split axis?

11 posts by 7 people · 19 Dec 1999 - 10 Jan 2000

Arto Wikla 19 Dec 1999#509806
As the subject asks: is it true that you cannot use separate axis for acceleration and braking in Nascar 3? I just bought the sim. In Nascar 1999(!), GPL, Viper, SCRS and MGPRS2 I can use that. My wheel is MSFF. The control menu just doesn't see/hear anything, when I use the separeted axis brake pedal! And a lesser problem: I would like to use the buttons behind the wheel for gears, but the same: no reaction in the control menu... Arto
>And a lesser problem: I would like to use the buttons behind the wheel >for gears, but the same: no reaction in the control menu... Assign keyboard keys to the buttons in the profiler. Read the manuals that come with the wheel, they explain how to use it correctly. ~daxe -----------== Posted via Newsfeeds.Com, Uncensored Usenet News ==---------- http://www.newsfeeds.com The Largest Usenet Servers in the World! ------== Over 73,000 Newsgroups - Including Dedicated Binaries Servers ==-----
I've had no problem using separate axis for gas and brake using MSFF with N3. Here's how it's done: Start > Settings > Control Panel > Game Controllers At this point you'll see your MSFF, highlight it and click Properties. Choose the Settings Tab and then at the bottom of the page you'll see a check box 'Map Forces from Y Axis to X Axis, check it. Start up N3 and go into calibration and the second joystick should now be your brake. Hope it works for you, it worked for me.
ymenard 19 Dec 1999#509809
You can use different axis, but the use of gas and brake at the same time is not modeled in N3. In NR99 you couldn't. It let you use a different axis for the gas and brake, but it wasn't modeled. -- -- Fran?ois Mnard <ymenard> -- May the Downforce be with you... "People think it must be fun to be a super genius, but they don't realise how hard it is to put up with all the idiots in the world."
Arto Wikla 19 Dec 1999#509810
Many thanks! Even if the advice was not right to me - in my system this checking did not seem to have any effect. But while trying your advice, I understood that I have to _calibrate_ also the "Joystick 2". After the calibration the "Set control" accepted also my brake pedal! By the way, I feel a big improvement from N99 to N3: the force feedback feels to be well done! And it really adds the feeling of driving. And 1024x768 runs well in my PII350&Voodoo2. To me (an European :-) watching oval racing has not been very interesting. But driving them is another story... ;-) Arto
You can but the software won't help much, not like GPL in which the separate axis can be used to an advantage. N3 is crude in comparison, you don't even need to lift when changing gear ( Oh for a Patch!!!!). But it is probably better to enable split axis in N3 than not. Steve >As the subject asks: is it true that you cannot use separate axis for >acceleration and braking in Nascar 3? I just bought the sim. >Arto
Arto Wikla 19 Dec 1999#509812
Funny! Now when I can use different axis in both - thanks to r.a.s! - I feel that something is modelled in it: for example I can do "doughnuts" a'la Zanardi by breaking and accelerating the same time. And also in driving the feel is different. Perhaps it is only my imagination? Are you really sure that it is not modelled? And what does that actually mean? No "trail braking"? I have the feel that those Nascar cars only are so heavy compared to 67 F1 cars? Arto
ymenard 19 Dec 1999#509813
There's no difference, unless your under 30mph (or 25mph? One is N2 the other N3 not sure which). Under that speed you will go in a canned effect of tyre spin, but that's all. Per example, press both and turn. You will spin on a dime, very funny. You can have this with single-axis, you need to press it fast twice. But back to the point, it is not modeled. With seperate axis, the only thing it does is that it creates an imaginary axis using the two ones. So if you have 100% gas, and brake 100%, you will actually be 0% trottle / 0% brake. To add to the example, if you have 75% Gas and press 30% brake, you will actually be 45% gas. The only advantage you can get is that your transfer between gas and brake (or vice-versa) can be faster. Well, it's an example, because it's not actually full linear. Many people misunderstand the term trailbraking. It is simply the action of braking while cornering. You can do this in any type of controller, any game. -- -- Fran?ois Mnard <ymenard> -- May the Downforce be with you... "People think it must be fun to be a super genius, but they don't realise how hard it is to put up with all the idiots in the world."
>To me (an European :-) watching oval racing has not been very >interesting. But driving them is another story... ;-) Believe me when I say some Americans don't find oval racing interesting to watch either. LONG LIVE F1!! hehe -- Sean Higgins Proud Member of Beaver Creek Racing Redline Racing League www.rrlnrs.com CNSRL www.cnsrl.com
Phil Bowe 10 Jan 2000#513540
Yes, you can use separate axes for gas and brake. I have a Nascar pro wheel from thrustmaster and it has the switch for separate or combined. I set it to separate and configured it in control panel as a 3 axis 4 button joystick. Then calibrate the wheel twice, once as js1 and once as js2 the gas will be J1-Y and brake J2-Y.
Quoted text (13 lines)>As the subject asks: is it true that you cannot use separate axis for >acceleration and braking in Nascar 3? I just bought the sim. >In Nascar 1999(!), GPL, Viper, SCRS and MGPRS2 I can use that. My wheel >is MSFF. >The control menu just doesn't see/hear anything, when I use the separeted >axis brake pedal! >And a lesser problem: I would like to use the buttons behind the wheel >for gears, but the same: no reaction in the control menu... >Arto
Phil Bowe 10 Jan 2000#513541
PS. You still cannot trail brake is that's what you're getting at.
Quoted text (13 lines)>As the subject asks: is it true that you cannot use separate axis for >acceleration and braking in Nascar 3? I just bought the sim. >In Nascar 1999(!), GPL, Viper, SCRS and MGPRS2 I can use that. My wheel >is MSFF. >The control menu just doesn't see/hear anything, when I use the separeted >axis brake pedal! >And a lesser problem: I would like to use the buttons behind the wheel >for gears, but the same: no reaction in the control menu... >Arto

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy