What is the best controller setup for GP500, EA's Superbike SBK, and AMA? I
have three different steering controllers(Logitech Formula Force, TSW, and
Nascar Pro), as well as several joysticks/gamepads, MS Sidewinder 3D Pro, MS
Sidewinder GamePad, MS Freestyle Pro, CH Flightstick, etc.
I have been unable to get a decent configuration using any of these
controllers, especially in GP500. Could anyone currently playing these games
successfully please post the controller you are using and how you have it
configured(Acceleration, Front Brake, Rear Brake, Lean Left/Right, Gear
Up/Down, etc)? Any help would be greatly appreciated.
P.S. Anyone having lockup problems in GP500? I have a PII 450, 128mb,
Canopus Pure 3D Voodoo2 in SLI, Diamond MX300, running Win 95c, and my
machine almost always locks up either while I'm racing, or in the setup
menus. Each time I have to completely reboot my machine. Again, any help or
insight would be greatly appreciated.
Don Chapman
Don,
Here's the setup I use in AMA:
Steering: CH Flightstick Left/Right
Crouch/Situp: CH Flightstick Fore/Aft
Gear Up/Down: CH Flightstick Buttons
Throttle: TSW Throttle Pedal
Front Brake: TSW Brake Pedal
Rear Brake: TSW Clutch Pedal (not easy to heel-toe but can be done)
Rider Lean: AUTO
I use a similar setup in SBK except for the lack of rear brake.
BTW, I also ride using the true riders view which I find quite usable in
AMA. Can't stay on the bike with it in SBK though so I have to use the chase
view.
Wayne Hutchison
> What is the best controller setup for GP500, EA's Superbike SBK, and AMA? I
> have three different steering controllers(Logitech Formula Force, TSW, and
> Nascar Pro), as well as several joysticks/gamepads, MS Sidewinder 3D Pro, MS
> Sidewinder GamePad, MS Freestyle Pro, CH Flightstick, etc.
> I have been unable to get a decent configuration using any of these
> controllers, especially in GP500. Could anyone currently playing these games
or
> insight would be greatly appreciated.
> Don Chapman
Quoted text (8 lines)
> successfully please post the controller you are using and how you have it > configured(Acceleration, Front Brake, Rear Brake, Lean Left/Right, Gear > Up/Down, etc)? Any help would be greatly appreciated. > P.S. Anyone having lockup problems in GP500? I have a PII 450, 128mb, > Canopus Pure 3D Voodoo2 in SLI, Diamond MX300, running Win 95c, and my > machine almost always locks up either while I'm racing, or in the setup > menus. Each time I have to completely reboot my machine. Again, any helpFirst, absolutely no lock-up problems with GP 500 (Celeron 300A at 450,
V3 3000, 128M).
I am using my Logitech Formula wheel with GP 500, and CH pedals wired in
for GP 500. I presently use auto lean, with manual shifting on the
paddles. I've increased the wheel sensitivity (right term?) to +50% in
the GP 500 controller set-up. I use the pedals for throttle and brake,
with combined front and rear.
I am far from an expert, but this seems to work fairly well. I tried a
joy stick, but I was really struggling with it.
Kevin Caldwell
Calgary, Canada


































