Force RS-NASCAR 3 Question

I have gotten an Act Lab Force RS Wheel. In NASCAR 3, everything works except the brake. The brake pedal works in the wheel setup in the control panel, but won't in NASCAR 3. I see that it is the Y-Axis Down and the Gas is Y-Axis Up.... But N3 will only reconize the Gas pedal.. Anyone have any suggestions??? Thanks, TAZ

I use the Force Rs with split axis with no problems at all. the Calabrate 1 screen in N3 should be your wheel and your brake the calabrate 2 screen is your gas, be sure and go through both calabrations before selecting the steering, gas, brake, etc.... hope this helps Morris

Quoted text (33 lines)

> Tazzie, > I recognize your handle from RASN. > Being the Earnhart fan that u are, I'm suprised you'd be worried about > brakes. Figured you'd just use the car ahaed of you to slow down (Maybe TL 4 > example) > Anways, to be able to properly use your controller in N3, you have paint a > big "24" on your side doors &...:-) > Seriously, though, it sounds like you have the pedals set on "split axis" > via whatever software act-labs gives you to set up your wheel. This gives an > x-axis & y-axis, N3 won't recognize this. You need to set your pedals to a > combined axis setting. I don't know how to do this with your wheel (being an > MS wheel user, myself) > Randy > >I have gotten an Act Lab Force RS Wheel. > >In NASCAR 3, everything works except the brake. The brake pedal works in > >the wheel setup in the control panel, but won't in NASCAR 3. > >I see that it is the Y-Axis Down and the Gas is Y-Axis Up.... > >But N3 will only reconize the Gas pedal.. > >Anyone have any suggestions??? > >Thanks, > >TAZ

Hello, Thanks for your reply... My wheel, the calabrate 1 screen is the gas and the wheel and the calabrate 2 screen does nothing. And on the wheel config. The when I set the gas pedal is sets it to Y-Axis Down.....but the RS instructs say the gas is Y-Axis up. And the brake also does Y-Axis Down.........I don't know Also, the wheel seems to have a big "dead Zone". I mean, I can move it back and forth pretty good going down the backstretch at taladega and the car hardly moves, is yours like this??? Any help would be appreciated............... Thanks, TAZ > I use the Force Rs with split axis with no problems at all. > the Calabrate 1 screen in N3 should be your wheel and your brake > the calabrate 2 screen is your gas, be sure and go through both calabrations

Quoted text (14 lines)

> before > selecting the steering, gas, brake, etc.... > hope this helps > Morris > > Tazzie, > > I recognize your handle from RASN. > > Being the Earnhart fan that u are, I'm suprised you'd be worried about > > brakes. Figured you'd just use the car ahaed of you to slow down (Maybe

TL 4 > > example) > > Anways, to be able to properly use your controller in N3, you have paint a > > big "24" on your side doors &...:-) > > Seriously, though, it sounds like you have the pedals set on "split axis" > > via whatever software act-labs gives you to set up your wheel. This gives an > > x-axis & y-axis, N3 won't recognize this. You need to set your pedals to a > > combined axis setting. I don't know how to do this with your wheel (being an

Quoted text (9 lines)

> > MS wheel user, myself) > > Randy > > >I have gotten an Act Lab Force RS Wheel. > > >In NASCAR 3, everything works except the brake. The brake pedal works

in

Quoted text (11 lines)

> > >the wheel setup in the control panel, but won't in NASCAR 3. > > >I see that it is the Y-Axis Down and the Gas is Y-Axis Up.... > > >But N3 will only reconize the Gas pedal.. > > >Anyone have any suggestions??? > > >Thanks, > > >TAZ

Tazzie, I recognize your handle from RASN. Being the Earnhart fan that u are, I'm suprised you'd be worried about brakes. Figured you'd just use the car ahaed of you to slow down (Maybe TL 4 example) Anways, to be able to properly use your controller in N3, you have paint a big "24" on your side doors &...:-) Seriously, though, it sounds like you have the pedals set on "split axis" via whatever software act-labs gives you to set up your wheel. This gives an x-axis & y-axis, N3 won't recognize this. You need to set your pedals to a combined axis setting. I don't know how to do this with your wheel (being an MS wheel user, myself) Randy

Quoted text (14 lines)

>I have gotten an Act Lab Force RS Wheel. >In NASCAR 3, everything works except the brake. The brake pedal works in >the wheel setup in the control panel, but won't in NASCAR 3. >I see that it is the Y-Axis Down and the Gas is Y-Axis Up.... >But N3 will only reconize the Gas pedal.. >Anyone have any suggestions??? >Thanks, >TAZ

Nascar 3 does recognize separate gas and brake axis's. You have to calibrate both joysticks inside of nascar. Once you do this, you can then set the controls.